Class Hierarchy

Go to the graphical class hierarchy

This inheritance list is sorted roughly, but not completely, alphabetically:

[detail level 123]

C__pthread_cleanup_datum	Internal structure for pthread_cleanup_push()
C__pthread_rwlock_waiter_node_t	Internal structure that stores one waiting thread
C_coap_request_ctx	CoAP resource request handler context
C_gnrc_tcp_common_tcb_list_t	TCB list type
C_nib_abr_entry_t	Internal NIB-representation of the authoritative border router for multihop prefix and 6LoWPAN context dissemination
C_nib_dr_entry_t	Default route NIB entry
C_nib_offl_entry_t	Off-link NIB entry
C_nib_onl_entry	On-link NIB entry
C_si1133_channel_params	Si1133 channel parameters
►C_sock_tl_ep	Common IP-based transport layer end point
Cgnrc_tcp_ep_t	Address information for a single TCP connection endpoint
C_thread	thread_t holds thread's context data
C_unused	Marks an unused section of the packet buffer arena array
Cad7746	AD7746 device descriptor
Cad7746_params	AD7746 params
Cadc_chan_conf_t	ADC channel configuration
Cadc_conf_chan_t	ADC Channel Configuration
Cadc_conf_t	ADC device configuration
Cadcxx1c	ADCxx1C device descriptor
Cadcxx1c_params	ADCxx1C params
Cadi_3_refsys_regs_m4_t	ADI_3_REFSYS registers
Cadi_3_refsys_regs_t	ADI_3_REFSYS registers
Cadi_4_aux_regs_m8_t	ADI_4_AUX registers using masked 8-bit access
Cadi_4_aux_regs_t	ADI_4_AUX registers
Criot::adopt_lock_t	Tag type for adopt lock strategy
Cads101x	ADS101x/111x device descriptor
Cads101x_alert	ADS101x/111x alert device descriptor
Cads101x_alert_params	ADS101x/111x alert params
Cads101x_params	ADS101x/111x params
Cadt7310_t	Device descriptor for ADT7310 sensors
Cadxl345_data_t	ADXL345 result vector struct
Cadxl345_interrupt_t	Interrupt configuration struct for the ADXL345 sensor
Cadxl345_params_t	Configuration struct for the ADXL345 sensor
Cadxl345_t	Device descriptor for the ADXL345 sensor
Caes128_cmac_context_t	AES128_CMAC calculation context
Caes_context_t	Cipher_context_t-struct adapted for AES
Caip31068_params_t	AIP31068 device initialization parameters
Caip31068_t	AIP31068 PWM device data structure type
Caon_ioc_regs_t	AON_IOC registers
Caon_pmctl_regs_t	AON_PMCTL registers
Caon_rtc_regs_t	AON_RTC registers
Caon_sysctl_regs_t	AON_SYSCTL registers
Caon_wuc_regs_t	AON_WUC registers
Capa102_params_t	Configuration parameters for (chained) APA102 LEDs
Capds99xx_int_config_t	Interrupt configuration
Capds99xx_int_source_t	Interrupt source
Capds99xx_params_t	APDS99XX device initialization parameters
Capds99xx_rgb_t	RGB count value data structure (APDS9950 and APDS9960 only)
Capds99xx_t	APDS99XX sensor device data structure type
Casymcute_con	Asymcute connection context
Casymcute_req	Asymcute request context
Casymcute_sub	Data-structure holding the state of subscriptions
Casymcute_topic	Data-structure for holding topics and their registration status
Casymcute_will	Data structure for defining a last will
Casync_read_t	Interrupt callback information structure
Cat24cxxx_params	Struct that holds initialization parameters
Cat24cxxx_t	Struct that represents an AT24CXXX device
Cat24mac_params_t	Struct holding all params needed for device communication
Cat25xxx_params_t	Struct holding all params needed for device initialization
Cat25xxx_t	Struct that represents an AT25XXX device
Cat30tse75x_t	Device descriptor for a AT30TSE75x device
Cat86rf215_BBC_regs	Base Band Controller registers
Cat86rf215_params	Struct holding all params needed for device initialization
Cat86rf215_RF_regs	Radio Frontend registers
Cat86rf2xx_params	Struct holding all params needed for device initialization
Cat_dev_init_t	AT device initialization parameters
Cat_dev_t	AT device structure
Cat_urc_t	Unsolicited result code data structure
Cata8520e_params_t	Initialization parameters
Cata8520e_t	Device descriptor
Catmega_gpio_port_t	Structure describing the memory layout of the registers of a GPIO port on ATmega MCUs
Catomic_bit_u16_t	Type specifying a bit in an uint16_t
Catomic_bit_u32_t	Type specifying a bit in an uint32_t
Catomic_bit_u64_t	Type specifying a bit in an uint64_t
Catomic_bit_u8_t	Type specifying a bit in an uint8_t
Catomic_bool	Type with the same alignment and size as atomic_bool
Catomic_char	Type with the same alignment and size as atomic_char
Catomic_int	Type with the same alignment and size as atomic_int
Catomic_int_fast16_t	Type with the same alignment and size as atomic_int_fast16_t
Catomic_int_fast32_t	Type with the same alignment and size as atomic_int_fast32_t
Catomic_int_fast64_t	Type with the same alignment and size as atomic_int_fast64_t
Catomic_int_fast8_t	Type with the same alignment and size as atomic_int_fast8_t
Catomic_int_least16_t	Type with the same alignment and size as atomic_int_least16_t
Catomic_int_least32_t	Type with the same alignment and size as atomic_int_least32_t
Catomic_int_least64_t	Type with the same alignment and size as atomic_int_least64_t
Catomic_int_least8_t	Type with the same alignment and size as atomic_int_least8_t
Catomic_intmax_t	Type with the same alignment and size as atomic_intmax_t
Catomic_intptr_t	Type with the same alignment and size as atomic_intptr_t
Catomic_llong	Type with the same alignment and size as atomic_llong
Catomic_long	Type with the same alignment and size as atomic_long
Catomic_schar	Type with the same alignment and size as atomic_schar
Catomic_short	Type with the same alignment and size as atomic_short
Catomic_size_t	Type with the same alignment and size as atomic_size_t
Catomic_uchar	Type with the same alignment and size as atomic_uchar
Catomic_uint	Type with the same alignment and size as atomic_uint
Catomic_uint_fast16_t	Type with the same alignment and size as atomic_uint_fast16_t
Catomic_uint_fast32_t	Type with the same alignment and size as atomic_uint_fast32_t
Catomic_uint_fast64_t	Type with the same alignment and size as atomic_uint_fast64_t
Catomic_uint_fast8_t	Type with the same alignment and size as atomic_uint_fast8_t
Catomic_uint_least16_t	Type with the same alignment and size as atomic_uint_least16_t
Catomic_uint_least32_t	Type with the same alignment and size as atomic_uint_least32_t
Catomic_uint_least64_t	Type with the same alignment and size as atomic_uint_least64_t
Catomic_uint_least8_t	Type with the same alignment and size as atomic_uint_least8_t
Catomic_uintmax_t	Type with the same alignment and size as atomic_uintmax_t
Catomic_uintptr_t	Type with the same alignment and size as atomic_uintptr_t
Catomic_ullong	Type with the same alignment and size as atomic_ullong
Catomic_ulong	Type with the same alignment and size as atomic_ulong
Catomic_ushort	Type with the same alignment and size as atomic_ushort
Catwinc15x0	ATWINC15x0 device descriptor type
Catwinc15x0_params_t	ATWINC15x0 hardware and global parameters
Cauto_init_module_t	Type to represent a module to be auto-initialized
Caux_aiodio_regs_t	AUX_AIODIO registers
Caux_anaif_regs_t	AUX_ANAIF registers
Caux_evctl_regs_t	AUX_EVCTL registers
Caux_evtcl_regs_t	AUX_EVCTL registers
Caux_smph_regs_t	AUX_SMPH registers
Caux_sysif_regs_t	AUX_SYSIF registers
Caux_tdc_regs_t	AUX_TDC registers
Caux_timer01_regs_t	AUX_TIMER01 registers
Caux_timer2_regs_t	AUX_TIMER2 registers
Caux_timer_regs_t	AUX_TIMER registers
Caux_wuc_regs_t	AUX_WUC registers
Cbe_uint16_t	A 16 bit integer in big endian aka network byte order
Cbe_uint32_t	A 32 bit integer in big endian aka network byte order
Cbe_uint64_t	A 64 bit integer in big endian aka network byte order
Cbenchmark_msg_cmd_t	Command response from the server
Cbenchmark_msg_ping_t	Benchmark message to the server
Cbh1750fvi_params_t	Set of configuration parameters for BH1750FV devices
Cbh1750fvi_t	Device descriptor for BH1570FVI devices
Cbh1900nux_params_t	Set of configuration parameters for BH1900NUX devices
Cbh1900nux_t	Device descriptor for BH1900NUX devices
Cbhp	Bottom Half Processor descriptor
Cbhp_event_t	Event based Bottom Half Processor descriptor
Cbhp_msg_t	Message based Bottom Half Processor descriptor
Cble_npl_callout	Ble_npl callout wrapper
Cble_npl_event	Ble_npl event wrapper
Cble_npl_eventq	Ble_npl event queue wrapper
Cble_npl_mutex	Ble_npl mutex wrapper
Cble_npl_sem	Ble_npl semaphore wrapper
Cbloom_t	Bloom_t bloom filter object
Cbluetil_ad_data_t	Struct used for returning the contents of a selected field
Cbluetil_ad_t	Descriptor for a buffer containing advertising data
Cbme680_field_data	BME680 sensor field data
Cbme680_intf_i2c_t	BME680 I2C parameters
Cbme680_intf_spi_t	BME680 SPI parameters
Cbme680_intf_t	BME680 Hardware interface parameters union
Cbme680_params_t	BME680 device initialization parameters
Cbme680_t	BME680 device descriptor
Cbmp180_calibration_t	Calibration struct for the BMP180 sensor
Cbmp180_params_t	Device initialization parameters
Cbmp180_t	Device descriptor for the BMP180 sensor
Cbmx055_params_t	Data structure holding the device parameters needed for initialization
Cbmx055_t	Device descriptor for BMX055 sensors
Cbmx280_calibration_t	Calibration struct for the BMX280 sensor
Cbmx280_params_t	Parameters for the BMX280 sensor
Cbmx280_t	Device descriptor for the BMX280 sensor
Cbq2429x_fault_t	Device faults
Cbq2429x_params_t	BQ2429x device parameters
Cbq2429x_status_t	Device status
Cbq2429x_t	BQ2429x device descriptor
Ccan	Low level device structure for ESP32 CAN (extension of candev_t)
Ccan_bittiming	CAN bit-timing parameters
Ccan_bittiming_const	CAN hardware-dependent bit-timing constant
Ccan_conf_t	ESP CAN device configuration
Ccan_filter	Controller Area Network filter
Ccan_frame	Controller Area Network frame
Ccan_opt_t	Structure to pass a CAN option
Ccan_pkt_t	A CAN packet
Ccan_reg_entry	Registry entry
Ccan_rx_data	Received data structure
Ccan_trx	Generic transceiver descriptor
Ccandev	Structure to hold driver state
Ccandev_conf	Linux candev configuration
Ccandev_dev	Candev descriptor to pass to the device thread
Ccandev_driver	Structure to hold driver interface -> function mapping
Ccandev_linux	The candev_linux struct
Ccandev_mcp2515	MCP2515 device descriptor
Ccandev_mcp2515_conf	MCP2515 configuration descriptor
Ccandev_params	Parameters to initialize a candev
Ccandev_stm32_isr	Internal interrupt flags
Ccandev_stm32_rx_fifo	This structure holds anything related to the receive part
Ccandev_stm32_rx_mailbox	This structure holds anything related to the receive part
Ccb_mux	Cb_mux list entry structure
Ccbw_info_t	USBUS Command Block Wrapper information
Ccc110x_chanmap_t	Structure to hold mapping between virtual and physical channel numbers
Ccc110x_config_t	Configuration of the transceiver to use
Ccc110x_framebuf_t	Buffer to temporary store incoming/outgoing packet
Ccc110x_fs_calibration_t	Structure holding the calibration data of the frequency synthesizer
Ccc110x_params_t	Structure holding all parameter for driver initialization
Ccc110x_patable_t	Structure that holds the PATABLE, which allows to configure the 8 available output power levels using a magic number for each level
Ccc110x_t	Device descriptor for CC1100/CC1101 transceivers
Ccc1xxx_l2hdr_t	Layer 2 header used in CC1xxx frames
Ccc1xxx_t	Users of the CC110x/CC1200 adaption layer have to overlap their device handle with this structure
Ccc2420_params	Struct holding all parameters needed for device initialization
Ccc2420_t	Device descriptor for CC2420 radio devices
Ccc2538_gpio_t	GPIO port component registers
Ccc2538_gptimer_t	GPTIMER component registers
Ccc2538_ioc_t	IOC port component registers
Ccc2538_rf_t	Device descriptor for CC2538 transceiver
Ccc2538_rfcore_t	RF Core component registers
Ccc2538_soc_adc_t	SOC ADC component registers
Ccc2538_ssi_t	SSI component registers
Ccc2538_sys_ctrl_t	System Control component registers
Ccc2538_uart_t	UART component registers
Ccc26x0_ioc_regs_t	Obtain IOCFG-register for a DIO
Cccfg_regs_t	CCFG registers
Cccs811_params_t	CCS811 device initialization parameters
Cccs811_t	CCS811 sensor device data structure
Cchacha20poly1305_ctx_t	Chacha20poly1305 state struct
Cchacha_ctx	A ChaCha cipher stream context
Cchunk_ringbuf_t	A chunked ringbuffer
Ccib_t	Circular integer buffer structure
Ccid_t	CID register see section 5.2 in SD-Spec v5.00
Cpsa_cipher_operation_s::cipher_context	Union containing cipher contexts for the executing backend
Ccipher_context_t	Context for cipher-operations
Ccipher_interface_st	BlockCipher-Interface for the Cipher-Algorithms
Ccipher_t	Basic struct for using block ciphers contains the cipher interface and the context
Ccirc_buf_t	Circular buffer holding moving average values
Cclient_ep_t	Client ep structure
Cclif_attr_t	Link format attribute descriptor
Cclif_t	Link format descriptor
Cclk_cfg_t	Clock configuration
Cclk_div_t	Clock divider configuration
Cclk_mux_t	Clock mux configuration
Ccoap_block1_t	Block1 helper struct
Ccoap_block_request_t	Blockwise request helper struct
Ccoap_block_slicer_t	Blockwise transfer helper struct
Ccoap_hdr_t	Raw CoAP PDU header structure
Ccoap_link_encoder_ctx_t	Context information required to write a resource link
Ccoap_optpos_t	CoAP option array entry
Ccoap_pkt_t	CoAP PDU parsing context structure
Ccoap_resource_subtree_t	Type for CoAP resource subtrees
Ccoap_resource_t	Type for CoAP resource entry
Ccolor_hsv_t	Data-structure for holding HSV colors
Ccolor_rgb_t	Data-structure describing a RGB color
Ccolor_rgba_t	RGBA color value
Ccond_t	Condition variable structure
Criot::condition_variable	C++11 compliant implementation of condition variable, uses the time point implemented in our chrono replacement instead of the specified one
CCONFIG_SUIT_STORAGE_RAM_ATTR	Memory storage state
Ccongure_quic_snd_consts_t	Constants for the congestion control
►Ccongure_reno_snd_consts_t	Constants for the congestion control
Ccongure_abe_snd_consts_t	Constants for the congestion control
Ccongure_snd_ack_t	Object to represent an ACK to a message
Ccongure_snd_driver	Driver for CongURE objects
Ccongure_snd_msg_t	Object to represent a collection of sent messages
►Ccongure_snd_t	Base state object for CongURE implementations
Ccongure_mock_snd_t	A mock CongURE state object
Ccongure_quic_snd_t	State object for CongURE QUIC
Ccongure_reno_snd	State object for CongURE Reno
Cconn_can_isotp_master	ISO-TP master connection
Cconn_can_isotp_slave	ISO-TP salve connection
Cconn_can_raw	RAW CAN connection
Cconstfs_file_t	A file in ConstFS (file name + contents)
Cconstfs_t	ConstFS file system superblock
Ccontext_switch_frame	Stores the registers and PC for a context switch
Ccord_lc_filter	Filters to use for a lookup
Ccord_lc_rd_t	Information about RD server and its lookup interface resources
Ccord_lc_result	Result of lookup
Ccortexm_base_t	Structure of Cortex-M basic vector table
Ccredman_buffer_t	Buffer of the credential
Ccredman_credential_t	Credential information
Ccsd_t	CSD register (see section 5.3 in SD-Spec v5.00)
Ccsd_v1_t	CSD register with csd structure version 1.0 see section 5.3.2 in SD-Spec v5.00
Ccsd_v2_t	CSD register with csd structure version 2.0 see section 5.3.3 in SD-Spec v5.00
Ccsma_sender_conf_t	Configuration type for backoff
Ccst816s_params_t	Cst816s driver struct
Ccst816s_t	Cst816s device descriptor
Ccst816s_touch_data_t	Cst816s touch event data
Cctap_attested_cred_data_header_t	CTAP attested credential data header struct
Cctap_attested_cred_data_t	CTAP attested credential data struct
Cctap_auth_data_header_t	CTAP authenticator data header struct
Cctap_auth_data_t	CTAP authenticator data struct
Cctap_client_pin_req_t	CTAP client pin request struct
Cctap_config_t	CTAP authenticator config struct
Cctap_cred_desc	CTAP credential description struct
Cctap_cred_desc_alt	CTAP credential description alternative struct
Cctap_cred_id_t	CTAP credential ID
Cctap_crypto_key_agreement_key_t	Key agreement key
Cctap_crypto_pub_key_t	Elliptic curve public key
Cctap_get_assertion_req_t	CTAP get assertion request struct
Cctap_hid_cid_t	CTAP_HID channel identifier struct
Cctap_hid_cont_pkt_t	CTAP_HID continuation packet struct
Cctap_hid_init_pkt_t	CTAP_HID initialization packet struct
Cctap_hid_init_resp_t	CTAP_HID initialization response struct
Cctap_hid_pkt_t	CTAP_HID packet struct
Cctap_info_t	CTAP info struct
Cctap_make_credential_req_t	CTAP make credential request struct
Cctap_options_t	CTAP options struct
Cctap_public_key_cose_t	CTAP cose key struct
Cctap_req_t	CTAP request struct
Cctap_resident_key	CTAP resident key struct
Cctap_resp_t	CTAP response struct
Cctap_rp_ent_t	CTAP relying party entity struct
Cctap_state_t	CTAP state struct
Cctap_user_ent_t	CTAP user entity struct
Cdac_conf_t	DAC line configuration data
Cdac_dds_params_t	Configuration struct for a DAC DDS channel
Cdcf77	Device descriptor for DCF77 sensor devices
Cdcf77_bits_t	Timeinformation bitfields for DCF77 devices
Cdcf77_params_t	Configuration parameters for DCF77 devices
Cddi0_osc_regs_m16_t	DDI_0_OSC registers with masked 16-bit access
Cddi0_osc_regs_t	DDI_0_OSC registers
Cdebugpins_config	Struct holding configuration of OpenWSN debug pins
Criot::defer_lock_t	Tag type for defer lock strategy
Cdevfs	A device "file" consists of a file name and an opaque pointer to device driver private data
Cdevice_reg_entry_t	Registry entry to keep track of registered Ethernet network devices
Cdfplayer	A DFPlayer Mini device descriptor
Cdfplayer_file_t	Data structure representing a file on the DFPlayer
Cdfplayer_params_t	Initialization parameters of a DFPlayer Mini device descriptor
Cdfu_get_status_pkt_t	USB DFU get_status control request packet
Cdhcpv6_duid_l2_t	DUID based on link-layer address plus time
Cdhcpv6_duid_t	Generic storage DUID
Cdhcpv6_msg_t	Client/Server message header
Cdhcpv6_opt_dns_rns_t	DHCPv6 DNS recursive name server option
Cdhcpv6_opt_duid_t	DHCPv6 client or server identifier option format
Cdhcpv6_opt_elapsed_time_t	DHCPv6 elapsed time option format
Cdhcpv6_opt_ia_na_t	DHCPv6 identity association for non-temporary addresses (IA_NA) option format
Cdhcpv6_opt_ia_pd_t	DHCPv6 identity association for prefix delegation option (IA_PD) format
Cdhcpv6_opt_iaaddr_t	DHCPv6 IA address option format
Cdhcpv6_opt_iapfx_t	DHCPv6 IA prefix option format
Cdhcpv6_opt_iid_t	DHCPv6 interface-id option
Cdhcpv6_opt_imr_t	DHCPv6 INF_MAX_RT option format
Cdhcpv6_opt_irt_t	DHCPv6 Information Refresh Time option format
Cdhcpv6_opt_mud_url_t	MUD URL DHCPv6 option format
Cdhcpv6_opt_oro_t	DHCPv6 option request option format
Cdhcpv6_opt_pref_t	DHCPv6 preference option format
Cdhcpv6_opt_relay_msg_t	DHCPv6 relay message option
Cdhcpv6_opt_smr_t	DHCPv6 SOL_MAX_RT option format
Cdhcpv6_opt_status_t	DHCPv6 status code option format
Cdhcpv6_opt_t	General DHCPv6 option format
Cdhcpv6_relay_msg_t	Relay Agents/Server message format
Cdht_data_t	Data type for storing DHT sensor readings
Cdht_params_t	Configuration parameters for DHT devices
Cdht_t	Device descriptor for DHT sensor devices
Cdisp_dev	Generic type for a display device
Cdisp_dev_area_t	Display area coordinates
Cdisp_dev_driver_t	Generic type for a display driver
Cdisp_dev_reg	Disp dev registry entry
Cdma_conf_t	DMA configuration
Cdns_hdr_t	DNS internal structure
Cdose_params_t	Struct containing the required configuration
Cdpl_callout	Dpl callout wrapper
Cdpl_event	Dpl event wrapper
Cdpl_eventq	Dpl event queue wrapper
Cdpl_mutex	Dpl mutex wrapper
Cdpl_sem	Dpl semaphore wrapper
Cdpl_task	Dpl task wrapper
Cds1307_params_t	Set of configuration parameters for DS1307 devices
Cds1307_t	Device descriptor for DS1307 devices
Cds18_params_t	Device initialization parameters
Cds18_t	Device descriptor for a ds18 device
Cds3231_params_t	Set of configuration parameters for DS3231 devices
Cds3231_t	Device descriptor for DS3231 devices
Cds3234_params_t	Parameters for the DS3234 device driver
Cds75lx_params_t	Device initialization parameters
Cds75lx_t	Device descriptor for the DS75LX sensor
Cdsp0401_params_t	Device initialization parameters
Cdsp0401_t	Device descriptor for the DSP0401
Cdwc2_usb_otg_fshs_config_t	USB OTG configuration
Cdynamixel_reader_t	Dynamixel packet reader struct
Cdynamixel_t	Descriptor struct for a dynamixel device
Cdynamixel_writer_t	Dynamixel packet writer struct
Cecdsa_params_t	ECDSA parameters
Cecdsa_public_key_t	ECDSA public keys
Cemcute_sub	Data-structure for keeping track of topics we register to
Cemcute_topic_t	MQTT-SN topic
Cenc28j60_params_t	Struct containing the needed peripheral configuration
Cenc28j60_t	ENC28J60 device descriptor
Cencx24j600_frame_hdr	Structure resembling format as sent by device
Cencx24j600_params_t	Struct containing the needed peripheral configuration
Centropy_source_mbedtls_riot_t	Structure containing entropy function and its strength
Centropy_source_tests_prop_t	Data structure for Adaptive Proportion Test (NIST SP 800-90B 4.4.2)
Centropy_source_tests_rep_t	Data structure for Repetition Count Test (NIST SP 800-90B 4.4.1)
Cepd_bw_spi_controller_t	Display controller parameters
Cepd_bw_spi_params_t	SPI display device initialisation parameters
Cepd_bw_spi_t	Device initialisation parameters
Cesp_eth_netdev_t	Device descriptor for ESP-ETH devices
Cesp_now_netdev_t	Device descriptor for ESP-NOW devices
Cesp_now_params_t	Struct holding all parameters needed for device initialization
Cesp_now_pkt_hdr_t	Header with necessary flags for ESP-NOW packets
Cesp_wifi_netdev_t	Device descriptor for ESP WiFi devices
Ceth_conf_t	Ethernet Peripheral configuration
Ceth_dma_desc	Layout of enhanced RX/TX DMA descriptor
Cethernet_hdr_t	Ethernet header
Cethos_params_t	Struct containing the needed configuration
Ceui48_conf_t	Structure to hold providers for EUI-48 addresses
Ceui48_t	Data type to represent an EUI-48
Ceui64_conf_t	Structure to hold providers for EUI-64 addresses
Ceui64_t	Data type to represent an EUI-64
Cevent	Event structure
Cevent_callback_t	Callback Event structure definition
Cevent_deferred_callback_t	Deferred Callback Event structure
Cevent_periodic_callback_t	Periodic Callback Event structure
Cevent_periodic_t	Timeout Event structure
Cevent_source_subscriber_t	Subscriber of an event source
Cevent_source_t	Event source struct
Cevent_timeout_t	Timeout Event structure
►Cevtimer_event	Generic event
Cevtimer_msg_event_t	IPC-message event
Cevtimer_mbox_event_t	Message box event definition
Cevtimer_t	Event timer
Cfatfs_desc	FatFs instance descriptor
Cfatfs_file_desc	FatFs file instance descriptor
Cfcfg_regs_t	FCFG registers
Cfd_set	The fd_set structure
Cfeetech_reader_t	Feetech packet reader struct
Cfeetech_t	Descriptor struct for a feetech device
Cfeetech_writer_t	Feetech packet writer struct
Cfib_destination_set_entry_t	Entry used to collect available destinations
Cfib_entry_t	Container descriptor for a FIB entry
Cfib_sr_entry	Container descriptor for a FIB source route entry
Cfib_sr_meta_t	Container for one FIB source route table, combining source routes and an entry pool
Cfib_sr_t	Container descriptor for a FIB source route
Cfib_table_t	Meta information of a FIB table
CFIO_PORT_t	Fast GPIO register definition struct
Cflash_regs_t	FLASH registers
Cfletcher16_ctx_t	Fletcher's 16 bit checksum context struct
Cfletcher32_ctx_t	Fletcher's 32 bit checksum context struct
Cfmc_bank_conf_t	Bank configuration structure
Cfmc_conf_t	FMC peripheral configuration
Cfmc_gpio_t	FMC GPIO configuration type
Cfmc_nor_sram_bank_conf_t	Bank configuration structure for NOR/PSRAM/SRAM
Cfmc_nor_sram_timing_t	Timing configuration for NOR/PSRAM/SRAM
Cfmc_sdram_bank_conf_t	Bank configuration structure for SDRAM
Cfmc_sdram_timing_t	Timing configuration for SDRAM
Cfrac_t	Frac descriptor for fraction consisting of two 32 bit integers
Cfreqm_config_t	Frequency meter configuration
Cft5x06_params_t	Device initialization parameters
Cft5x06_t	Device descriptor for the driver
Cft5x06_touch_position_t	Touch position structure
Cfxos8700_measurement_t	Individual 3-axis measurement
Cfxos8700_params_t	Parameters needed for device initialization
Cfxos8700_t	Device descriptor for a FXOS8700 device
Cgcoap_listener	A modular collection of resources for a server
Cgcoap_observe_memo_t	Memo for Observe registration and notifications
Cgcoap_request_memo	Memo to handle a response for a request
Cgcoap_resend_t	Extends request memo for resending a confirmable request
Cgcoap_socket_t	CoAP socket to handle multiple transport types
Cgnrc_gomach_dupchk_t	GoMacH's data structure for recording TX information for avoiding receiving duplicate packets
Cgnrc_gomach_dupchk_unit_t	GoMacH's data structure for recording sender's past TX information
Cgnrc_gomach_frame_announce_t	GoMacH sub-channel announce frame
Cgnrc_gomach_frame_beacon_t	GoMacH Beacon frame
Cgnrc_gomach_frame_broadcast_t	GoMacH broadcast frame
Cgnrc_gomach_frame_data_t	GoMacH data frame
Cgnrc_gomach_frame_preamble_ack_t	GoMacH preamble_ack frame
Cgnrc_gomach_frame_preamble_t	GoMacH preamble frame
Cgnrc_gomach_hdr_t	GoMacH frame header
Cgnrc_gomach_l2_addr_t	GoMacH internal L2 address structure
Cgnrc_gomach_l2_id_t	GoMacH internal L2 address structure
Cgnrc_gomach_packet_info_t	Type to pass information about packet parsing
Cgnrc_gomach_slosch_unit_t	GoMacH's slot-schedule-unit
Cgnrc_gomach_timeout_t	GoMacH's timeout structure
Cgnrc_gomach_vtdma_manag_t	GoMacH's vTDMA (dynamic slots allocation) management unit
Cgnrc_gomach_vtdma_t	Sender's vTDMA (dynamic slots allocation) management unit
Cgnrc_ipv6_ext_frag_limits	Data type to describe limits of a single fragment in the reassembly buffer
Cgnrc_ipv6_ext_frag_rbuf_t	A reassembly buffer entry
Cgnrc_ipv6_ext_frag_send_t	Fragmentation send buffer type
Cgnrc_ipv6_ext_frag_stats_t	Statistics on reassembly and reassembly
Cgnrc_ipv6_nib_abr_t	Authoritative border router list entry view on NIB
Cgnrc_ipv6_nib_ft_t	Forwarding table entry view on NIB
Cgnrc_ipv6_nib_nc_t	Neighbor cache entry view on NIB
Cgnrc_ipv6_nib_pl_t	Prefix list entry view on NIB
Cgnrc_lorawan_key_ctx_t	GNRC LoRaWAN key context struct
Cgnrc_lorawan_mcps_t	MCPS service access point descriptor
Cgnrc_lorawan_mlme_t	MLME service access point descriptor
Cgnrc_lorawan_persistent_state_t	LoRaWAN state that needs to be preserved across reboots
Cgnrc_lorawan_t	GNRC LoRaWAN mac descriptor
Cgnrc_lwmac_frame_broadcast_t	LWMAC broadcast data frame
Cgnrc_lwmac_frame_data_t	LWMAC unicast data frame
Cgnrc_lwmac_frame_wa_t	LWMAC WA (wake-up answer packet, i.e., preamble-ACK packet) frame
Cgnrc_lwmac_frame_wr_t	LWMAC WR (wake-up request packet, i.e., preamble packet) frame
Cgnrc_lwmac_hdr_t	LWMAC header
Cgnrc_lwmac_l2_addr_t	LWMAC internal L2 address structure
Cgnrc_lwmac_packet_info_t	Type to pass information about parsing
Cgnrc_lwmac_timeout_t	LWMAC timeout structure
Cgnrc_mac_rx_t	MAC internal type for storing reception state parameters and state machines
Cgnrc_mac_timeout_event_t	Structure of the GNRC_MAC timeout event
Cgnrc_mac_timeout_t	Structure holding the GNRC_MAC timeouts
Cgnrc_mac_tx_neighbor_t	Type for storing states of TX neighbor node
Cgnrc_mac_tx_t	MAC internal type for storing transmission state parameters and state machines
Cgnrc_netapi_opt_t	Data structure to be send for setting (GNRC_NETAPI_MSG_TYPE_SET) and getting (GNRC_NETAPI_MSG_TYPE_GET) options
Cgnrc_netif_6lo_t	6Lo component of gnrc_netif_t
Cgnrc_netif_dedup_t	Structure to store information on the last broadcast packet received
Cgnrc_netif_hdr_t	Generic network interface header
Cgnrc_netif_ipv6_t	IPv6 component for gnrc_netif_t
Cgnrc_netif_lorawan_t	GNRC LoRaWAN interface descriptor
Cgnrc_netif_mac_t	Common MAC module component of gnrc_netif_mac_t
Cgnrc_netif_ops
Cgnrc_netif_pktq_t	A packet queue for Network interface API with a de-queue timer
Cgnrc_netif_t	Representation of a network interface
Cgnrc_netreg_entry	Entry to the Network protocol registry
Cgnrc_netreg_entry_cbd_t	Callback + Context descriptor
Cgnrc_pktqueue	Data type for packet queue nodes
Cgnrc_pktsnip	Type to represent parts (either headers or payload) of a packet, called snips
Cgnrc_priority_pktqueue_node	Data type for gnrc priority packet queue nodes
Cgnrc_rpl_dao_ack_t	Destination Advertisement Object Acknowledgement
Cgnrc_rpl_dao_t	Destination Advertisement Object
Cgnrc_rpl_dio_t	DIO Base Object
Cgnrc_rpl_dis_t	DODAG Information Solicitation
Cgnrc_rpl_internal_opt_dis_solicited_t	Internal unpacked struct type for DIS solicited option insertion
Cgnrc_rpl_internal_opt_t	Internal unpacked struct type for option insertion
Cgnrc_rpl_of_t	Objective function representation
Cgnrc_rpl_opt_dis_solicited_t	DIS Solicited Information option
Cgnrc_rpl_opt_dodag_conf_t	DODAG Configuration Option
Cgnrc_rpl_opt_prefix_info_t	Prefix Information Option
Cgnrc_rpl_opt_t	RPL-Option Generic Format
Cgnrc_rpl_opt_target_t	Target Option
Cgnrc_rpl_opt_transit_t	Transit Option
Cgnrc_rpl_p2p_dro_ack_t	P2P Discovery Reply Object Acknowledgement (P2P-DRO-ACK)
Cgnrc_rpl_p2p_dro_t	P2P Discovery Reply Object (P2P-DRO)
Cgnrc_rpl_p2p_ext_t	Extended DODAG information for P2P-RPL
Cgnrc_rpl_p2p_opt_rdo_t	P2P Route Discovery Object (RDO) Option
Cgnrc_sixlowpan_ctx_t	Entry in the 6LoWPAN context buffer
Cgnrc_sixlowpan_frag_fb_t	6LoWPAN fragmentation buffer entry
Cgnrc_sixlowpan_frag_hint_t	A fragment size hint
Cgnrc_sixlowpan_frag_rb_base_t	Base class for both reassembly buffer and virtual reassembly buffer
Cgnrc_sixlowpan_frag_rb_int	Fragment intervals to identify limits of fragments and duplicates
Cgnrc_sixlowpan_frag_rb_t	An entry in the 6LoWPAN reassembly buffer
Cgnrc_sixlowpan_frag_sfr_bitmap_t	Bitmap type to simplify comparisons
Cgnrc_sixlowpan_frag_sfr_fb	Extension for 6LoWPAN fragmentation buffer for selective fragment recovery
Cgnrc_sixlowpan_frag_sfr_stats_t	Stats on selective fragment recovery
Cgnrc_sixlowpan_frag_stats_t	Statistics on fragmentation and reassembly
Cgnrc_sixlowpan_frag_vrb_t	Representation of the virtual reassembly buffer entry
Cgnrc_sock_recv_aux_t	Structure to retrieve auxiliary data from gnrc_sock_recv
Cgnrc_sock_reg	Sock Network protocol registry info
Cgnrc_tx_sync_t	TX synchronization data
Cgomach	GoMacH's specific structure for storing internal states
Cgp2y10xx_params_t	GP2Y10xx device parameters
Cgp2y10xx_t	GP2Y10xx device descriptor
Cgpio_conf_esp32	GPIO pin configuration for ESP32/ESP32Cx/ESP32Sx MCUs
Cgpio_conf_gd32v	GPIO pin configuration for GD32V MCUs
Cgpio_conf_minimal	Public members of gpio_conf_t
Cgpio_conf_nrf5x	GPIO pin configuration for nRF5x MCUs
Cgpio_conf_sam0	GPIO pin configuration for SAM0 MCUs
Cgpio_conf_stm32	GPIO pin configuration for STM32 MCUs
Cgpio_io_ctrl_t	Memory layout of GPIO control register in IO bank 0
Cgpio_isr_ctx_t	Default interrupt context for GPIO pins
Cgpio_pad_ctrl_t	Memory layout of GPIO control register in pads bank 0
Cgpio_regs_t	GPIO registers
Cgpt_reg_t	GPT registers
Chal_spi_settings	Since one spi device can control multiple devices, some configuration can be changed on the fly from the hal
Chard_api_t	ROM Hard-API
Chd44780_params_t	Parameters needed for device initialization
Chd44780_t	Device descriptor for HD44780 LCD
Chdc1000_params_t	Parameters needed for device initialization
Chdc1000_t	Device descriptor for HDC1000 sensors
Chih6130_t	Device descriptor for HIH6130/HIH6131 sensors
Chm330x_data_t	Set of measured particulate matter values as sent by the device
Chm330x_params_t	Device initialization parameters
Chm330x_t	Device descriptor for the driver
Chmac_context_t	Context for HMAC operations based on sha256
Chmc5883l_data_t	Magnetic field values in milli-Gauss (mGs)
Chmc5883l_params_t	HMC5883L device initialization parameters
Chmc5883l_raw_data_t	Raw data set as two complements
Chmc5883l_t	HMC5883L sensor device data structure type
Chsc_params_t	Device initialization parameters
Chsc_t	Device descriptor for the HSC sensor
Chts221_params_t	Parameters needed for device initialization
Chts221_t	Device descriptor for HTS221 sensors
Ci2c_conf_t	I2C configuration structure
Ci2c_regs_t	I2C registers
Cicmp_echo_t	Echo request and response message format
►Cicmpv6_hdr_t	General ICMPv6 message format
Cicmpv6_echo_t	Echo request and response message format
Cicmpv6_error_dst_unr_t	Destination unreachable message format
Cicmpv6_error_param_prob_t	Parameter problem message format
Cicmpv6_error_pkt_too_big_t	Packet too big message format
Cicmpv6_error_time_exc_t	Time exceeded message format
Cndp_nbr_adv_t	Neighbor advertisement message format
Cndp_nbr_sol_t	Neighbor solicitation message format
Cndp_redirect_t	Redirect message format
Cndp_rtr_adv_t	Router advertisement message format
Cndp_rtr_sol_t	Router solicitation message format
Csixlowpan_nd_da_t	Duplicate address request and confirmation message format
►CIDSMEMessage
Cdsme::DSMEMessage	DSME Message interface implementation for GNRC
►CIDSMEPlatform
Cdsme::DSMEPlatform	DSMEPlatform interface implementation for GNRC
Cieee802154_csma_be_t	CSMA-CA exponential backoff parameters
Cieee802154_dev	IEEE802.15.4 device descriptor
Cieee802154_dsme_alloc_t	DSME Allocation descriptor
Cieee802154_mr_fsk_conf_t	Extension for IEEE 802.15.4g MR-FSK PHY
Cieee802154_mr_ofdm_conf_t	Extension for IEEE 802.15.4g MR-ODFM PHY
Cieee802154_mr_oqpsk_conf_t	Extension for IEEE 802.15.4g MR-OQPSK PHY
Cieee802154_phy_conf_t	Holder of the PHY configuration
Cieee802154_radio_cipher_ops	Struct of security operations
Cieee802154_radio_ops	Radio ops struct declaration
Cieee802154_rx_info_t	RX information associated to a frame
Cieee802154_sec_aux_key_identifier_1_t	Content of key_source if key mode is IEEE802154_SEC_SCF_KEYMODE_INDEX
Cieee802154_sec_aux_key_identifier_5_t	Content of key_source if key mode is IEEE802154_SEC_SCF_KEYMODE_SHORT_INDEX
Cieee802154_sec_aux_key_identifier_9_t	Content of key_source if key mode is IEEE802154_SEC_SCF_KEYMODE_HW_INDEX
Cieee802154_sec_aux_t	IEEE 802.15.4 auxiliary security header
Cieee802154_sec_ccm_block_t	Format of 16 byte input block of CCM
Cieee802154_sec_ccm_nonce_t	Format of 13 byte nonce
Cieee802154_sec_context	Struct to hold IEEE 802.15.4 security information
Cieee802154_sec_dev	IEEE 802.15.4 security device descriptor
Cieee802154_submac	IEEE 802.15.4 SubMAC descriptor
Cieee802154_submac_cb_t	IEEE 802.15.4 SubMAC callbacks
Cieee802154_tx_info_t	TX information of the last transmitted frame
Criot::detail::il_indices< Max, Pos, Indices >	Creates indices from Pos to Max
Criot::detail::il_indices< Max, Pos, int_list< Is... > >	Recursion step
Criot::detail::il_indices< Pos, Pos, int_list< Is... > >	End of recursion, Pos reached Max
Cili9341_t	Device descriptor for a ili9341
Cin6_addr	IPv6 address structure type
Cin_addr	IPv4 address structure type
Cina2xx_params_t	Configuration parameters of the INA2xx driver
Cina2xx_t	Device descriptor for INA2XX sensors
Cina3221_params_t	INA3221 device parameters
Cina3221_t	INA3221 device handle struct
Criot::detail::int_list< Is >	A list of integers (wraps a long... template parameter pack)
Cio1_xplained_params_t	Device initialization parameters
Cio1_xplained_t	Device descriptor for the IO1 Xplained extension
Ciolist	Iolist structure definition
Ciovec	Structure for scatter/gather I/O
Cipv4_addr_t	Data type to represent an IPv4 address
Cipv4_hdr_t	Data type to represent an IPv4 packet header
Cipv6_addr_t	Data type to represent an IPv6 address
Cipv6_ext_frag_t	Fragment header definition
►Cipv6_ext_t	IPv6 extension headers
►Cipv6_ext_rh_t	IPv6 routing extension header
Cgnrc_rpl_srh_t	The RPL Source routing header
Cipv6_hdr_t	Data type to represent an IPv6 packet header
Cipv6_mreq	IPv6 multicast request
Cir_nec_cmd_t	NEC command structure
Cir_nec_params_t	Device initialization parameters
Cir_nec_t	Device descriptor for the driver
Criot::irq_lock	RAII based IRQ lock
Cisl29020_params_t	Data structure holding the full set of configuration parameters
Cisl29020_t	Device descriptor for ISL29020 sensors
Cisl29125_params_t	Device parameters for ISL29125 sensors
Cisl29125_rgb_t	Data type for storing lux RGB sensor readings
Cisl29125_t	Device descriptor for ISL29125 sensors
Cisotp	The isotp struct
Cisotp_fc_options	The isotp_fc_options struct
Cisotp_options	The isotp_options struct
Cisrpipe_t	Context structure for isrpipe
Citg320x_data_t	Angular rate values in tenths of a degree per second
Citg320x_params_t	ITG320X device initialization parameters
Citg320x_raw_data_t	Raw data set as two complements
Citg320x_t	ITG320X sensor device data structure type
Cjc42_params_t	Device initialization parameters
Cjc42_t	Device descriptor for a jc42 device
Ckeccak_state_t	Context for operations on a sponge with keccak permutation
Ckw2xrf_params	Struct holding all params needed for device initialization
Cl2filter_t	Filter list entries
Cl2scan_list	Type of a Link Layer scan list
Cl3g4200d_data_t	Result vector for gyro measurement
Cl3g4200d_params_t	Device initialization parameters
Cl3g4200d_t	Device descriptor for L3G4200D sensors
Cl3gxxxx_data_t	Angular rates in millidegrees per seconds (mdps)
Cl3gxxxx_i2c_params_t	L3Gxxxx I2C interface parameters
Cl3gxxxx_if_params_t	L3Gxxxx Hardware interface parameters union
Cl3gxxxx_int_data_src_t	Data interrupt sources (data ready and FIFO status)
Cl3gxxxx_int_event_cfg_t	Event interrupt generator configuration (axis movement and wake-up)
Cl3gxxxx_int_event_src_t	Event interrupt sources (axis movement and wake-up)
Cl3gxxxx_int_src_t	Composite type for all possible interrupt sources
Cl3gxxxx_params_t	L3Gxxxx device initialization parameters
Cl3gxxxx_raw_data_t	Raw output data set as two's complements
Cl3gxxxx_spi_params_t	L3Gxxxx SPI interface parameters
Cl3gxxxx_t	L3Gxxxx sensor device data structure type
Clc709203f_params_t	Parameter struct for driver initialization
Clc709203f_t	Device descriptor for the fuel gauge
Clcd_driver	LCD driver interface
Clcd_fmc_desc_t	Descriptor of the FMC bank used for a LCD
Clcd_ll_par_driver_t	Low-level MCU 8080 8-/16-bit parallel interface driver
Clcd_params_t	Device initialization parameters
Clcd_t	Device descriptor for a lcd
Cle_uint16_t	A 16 bit integer in little endian
Cle_uint32_t	A 32 bit integer in little endian
Cle_uint64_t	A 64 bit integer in little endian
Cleds_config	OpenWSN leds pin configuration
CLIS2DH12_ACT_DURATION_t	ACT_DURATION definitions
CLIS2DH12_ACT_THS_t	ACT_THS definitions
CLIS2DH12_CLICK_CFG_t	CLICK_CFG definitions
CLIS2DH12_CLICK_SRC_t	CLICK_SRC definitions
Clis2dh12_click_t	LIS2DH12 click config values
CLIS2DH12_CLICK_THS_t	CLICK_THS definitions
CLIS2DH12_CTRL_REG0_t	CTRL_REG_0 definitions
CLIS2DH12_CTRL_REG1_t	CTRL_REG1 definitions
CLIS2DH12_CTRL_REG2_t	CTRL_REG2 definitions
CLIS2DH12_CTRL_REG3_t	CTRL_REG3 definitions
CLIS2DH12_CTRL_REG4_t	CTRL_REG4 definitions
CLIS2DH12_CTRL_REG5_t	CTRL_REG5 definitions
CLIS2DH12_CTRL_REG6_t	CTRL_REG6 definitions
CLIS2DH12_FIFO_CTRL_REG_t	FIFO_CTRL_REG definitions
Clis2dh12_fifo_data_t	LIS2DH12 FIFO data struct
CLIS2DH12_FIFO_SRC_REG_t	FIFO_SRC_REG definitions
Clis2dh12_fifo_t	LIS2DH12 FIFO config values
Clis2dh12_highpass_t	LIS2DH12 high pass config values
CLIS2DH12_INT1_CFG_t	INT1_CFG definitions
CLIS2DH12_INT1_DURATION_t	INT1_DURATION definitions
CLIS2DH12_INT1_THS_t	INT1_THS definitions
CLIS2DH12_INT2_CFG_t	INT2_CFG definitions
CLIS2DH12_INT2_DURATION_t	INT2_DURATION definitions
CLIS2DH12_INT2_THS_t	INT2_THS definitions
Clis2dh12_int_params_t	Parameter for interrupt configuration
Clis2dh12_params_t	LIS2DH12 configuration parameters
CLIS2DH12_REFERENCE_t	REFERENCE definitions
Clis2dh12_t	LIS2DH12 device descriptor
CLIS2DH12_TEMP_CFG_REG_t	TEMP_CFG_REG definitions
CLIS2DH12_TIME_LATENCY_t	TIME_LATENCY definitions
CLIS2DH12_TIME_LIMIT_t	TIME_LIMIT definitions
CLIS2DH12_TIME_WINDOW_t	TIME_WINDOW definitions
Clis3dh_data_t	Result vector for accelerometer measurement
Clis3dh_params_t	Configuration parameters for LIS3DH devices
Clis3dh_t	Device descriptor for LIS3DH sensors
Clis3mdl_3d_data_t	3d data container of the LIS3MDL sensor
Clis3mdl_params_t	Device initialization parameters
Clis3mdl_t	Device descriptor for LIS3MDL sensor
Clist_node	List node structure
Clittlefs2_desc_t	Littlefs descriptor for vfs integration
Clittlefs_desc_t	Littlefs descriptor for vfs integration
Clm75	Lm75 device descriptor
Clm75_params	Params required for initialization
Clm75_properties	Temperature reading properties/resolutions struct of the LM75 sensors
Criot::lock_guard< Mutex >	C++11 compliant implementation of unique lock
Clog	Empty log structure
Cloramac_channel_t	A LoRaMAC network channel
Cloramac_settings_t	LoRaMAC communication settings
Clorawan_buffer_t	Buffer helper for parsing and constructing LoRaWAN packets
Clorawan_hdr_t	Data type to represent a LoRaWAN packet header
Clorawan_join_accept_t	Join accept packet representation
Clorawan_join_request_t	Join request packet representation
Clpd8808_params_t	Parameters needed for configuration
Clpsxxx_params_t	Struct holding all parameters needed for device initialization
Clpsxxx_t	Device descriptor for LPSXXX sensors
Clsm303dlhc_3d_data_t	3d data container
Clsm303dlhc_params_t	Data structure holding all the information needed for initialization
Clsm303dlhc_t	Device descriptor for LSM303DLHC sensors
Clsm6dsxx_3d_data_t	3D output data
Clsm6dsxx_params_t	LSM6DSXX driver parameters
Clsm6dsxx_t	LSM6DSXX device descriptor
Cltc4150_dev	LTC4150 coulomb counter
Cltc4150_last_minute_data_t	Data structure used by ltc4150_last_minute
Cltc4150_params_t	Parameters required to set up the LTC4150 coulomb counter
Cltc4150_recorder_t	Interface to allow recording of the drawn current in a user defined resolution
Cltdc_conf_t	LTDC Peripheral configuration
Cltdc_gpio_t	LTDC GPIO configuration
Clua_riot_builtin_c	Entry describing a c lua module built into the application binary
Clua_riot_builtin_lua	Entry describing a pure lua module whose source is built into the application binary
Clwext4_desc_t	Lwext4 descriptor for vfs integration
Clwip_netif_t	Representation of a network interface
Clwip_sock_base	Sock base type
Clwm2m_client_connection	Connection to server descriptor
Clwm2m_client_data_t	LwM2M client descriptor
Clwm2m_obj_ipso_sensor_base	LwM2M IPSO sensor base object
Clwm2m_obj_ipso_sensor_base_args	Arguments for the creation of an object based on the IPSO Sensor Base object instance
Clwm2m_obj_ipso_sensor_base_inst	LwM2M IPSO sensor base instance
Clwm2m_obj_light_control_args	Arguments for the creation of a Light Control object instance
Clwm2m_obj_security_args	Arguments for a new Security object instance creation (lwm2m_object_security_instance_create)
Clwmac	LWMAC specific structure for storing internal states
Cmag3110_data_t	Data type for the result data
Cmag3110_params_t	Configuration parameters
Cmag3110_t	Device descriptor for MAG3110 magnetometer
Cmatrix_keypad_params_t	Device initialization parameters
Cmatrix_keypad_t	Device descriptor for the driver
Cmatstat_state_t	Internal state for computing running statistics
Cmax31855_data_t	Data structure for the MAX31855
Cmax31855_params_t	Device initialization parameters
Cmax31855_t	Device descriptor for the driver
Cmbox_t	Mailbox struct definition
Cmcp47xx_params_t	MCP47xx device configuration parameters
Cmcp47xx_saul_dac_params_t	MCP47xx configuration structure for mapping DAC channels to SAUL
Cmcp47xx_t	MCP47xx device data structure type
Cmcps_confirm_t	Mac Common Part Sublayer (MCPS) confirm representation
Cmcps_data_t	MCPS data
Cmcps_indication_t	Mac Common Part Sublayer (MCPS) indication representation
Cmcps_request_t	Mac Common Part Sublayer (MCPS) request representation
Cmd5_ctx_t	MD5 calculation context
Cmega_timer_t	Timer register map
Cmega_uart_t	UART register map
Cmemarray_element	Memory pool element
Cmemarray_t	Memory pool
Cmfrc522_mifare_key_t	A struct used for passing a MIFARE Crypto1 key
Cmfrc522_params_t	MFRC522 device initialization parameters
Cmfrc522_t	MFRC522 device data structure type
Cmfrc522_uid_t	A struct used for passing the UID of a PICC
Cmini_timer_t	8-bit timer register map
Cmlme_confirm_t	MAC (sub) Layer Management Entity (MLME) confirm representation
Cmlme_indication_t	MAC (sub) Layer Management Entity (MLME) indication representation
Cmlme_link_req_confirm_t	MLME Link Check confirmation data
Cmlme_lorawan_join_t	MLME Join Request data
Cmlme_mib_t	MAC Information Base descriptor for MLME Request-Confirm
Cmlme_request_t	MAC (sub) Layer Management Entity (MLME) request representation
Cmma7660_data_t	Data type for the result data
Cmma7660_params_t	Parameters for an MMA7660 device
Cmma7660_t	Device descriptor for an MMA7660 device
Cmma8x5x_data_t	Data type for the result data
Cmma8x5x_params_t	Configuration parameters
Cmma8x5x_t	Device descriptor for MMA8x5x accelerometers
Cmotor_driver_config_t	Describe DC motor driver with PWM device and motors array
Cmotor_t	Describe DC motor with PWM channel and GPIOs
Cmpl3115a2_params_t	Configuration parameters
Cmpl3115a2_t	Device descriptor for MPL3115A2 sensors
Cmpu9x50_params_t	Device initialization parameters
Cmpu9x50_results_t	MPU-9X50 result vector struct
Cmpu9x50_status_t	Configuration struct for the MPU-9X50 sensor
Cmpu9x50_t	Device descriptor for the MPU9X50 sensor
Cmq3_t	Device descriptor for a MQ-3 sensor
Cmrf24j40_params	Struct holding all params needed for device initialization
Cmrf24j40_t	Device descriptor for MRF24J40 radio devices
Cmsc_cbw_buf_t	Command Block Wrapper packet structure
Cmsc_cbw_rw10_pkt_t	CBW Packet structure for (SCSI_READ10) and (SCSI_WRITE10) requests
Cmsc_csw_buf_t	Command Status Wrapper packet structure
Cmsc_inquiry_pkt_t	Packet structure to answer (SCSI_INQUIRY) request
Cmsc_mode_parameter_pkt_t	Packet structure to answer (SCSI_MODE_SELECT6) and (SCSI_MODE_SENSE6) requests
Cmsc_read_capa_pkt_t	Packet structure to answer (SCSI_READ_CAPACITY) request
Cmsc_read_fmt_capa_pkt_t	Packet structure to answer (SCSI_READ_FORMAT_CAPACITIES) request
Cmsc_request_sense_pkt_t	Packet structure to answer (SCSI_REQUEST_SENSE) request
Cmsc_test_unit_pkt_t	Packet structure to answer (SCSI_TEST_UNIT_READY) request
Cmsg_bus_entry_t	Message bus subscriber entry
Cmsg_bus_t	A message bus is just a list of subscribers
Cmsg_t	Describes a message object which can be sent between threads
Cmsp430_clock_params_t	MSP430Fxzy Basic Clock System Parameters
Cmsp430_port_p1_p2_t	GPIO Port 1/2 (with interrupt functionality)
Cmsp430_port_p3_p6_t	GPIO Port 3..6 (without interrupt functionality)
Cmsp430_port_p7_p8_t	GPIO Port 7/8 (different register layout than Ports 1-6)
Cmsp430_port_t	Common MSP GPIO Port Registers
Cmsp430_timer_t	Timer peripheral registers
Cmsp430_usart_conf_t	MSP430 x1xx USART configuration registers
Cmsp430_usart_params_t	MSP430 x1xx USART configuration
Cmsp430_usart_prescaler_t	MSP430 x1xx USART prescaler configuration
Cmsp430_usart_sfr_t	USART Special Function Registers (SFR)
Cmsp430_usart_spi_params_t	MSP430 x1xx SPI configuration, CPU level
Cmsp430_usart_t	USART (UART, SPI and I2C) Registers
Cmsp430_usart_uart_params_t	MSP430 x1xx UART configuration, CPU level
Cmsp430_usci_a_t	Universal Serial Control Interface Type A (USCI_A) Registers
Cmsp430_usci_b_t	Universal Serial Control Interface Type B (USCI_B) Registers
Cmsp430_usci_conf_t	MSP430 F2xx/G2xx USCI configuration registers
Cmsp430_usci_params_t	MSP430 F2xx/G2xx USCI configuration
Cmsp430_usci_prescaler_t	MSP430 F2xx/G2xx USCI prescaler configuration
Cmsp430_usci_spi_params_t	MSP430 F2xx/G2xx SPI configuration, CPU level
Cmsp430_usci_uart_params_t	MSP430 F2xx/G2xx UART configuration, CPU level
Cmtd_at24cxxx_t	Device descriptor for mtd at24cxxx device
Cmtd_at25xxx_t	Device descriptor for mtd_at25xxx device
Cmtd_desc	MTD driver interface
Cmtd_dev_t	MTD device descriptor
Cmtd_emulated_t	Device descriptor for a MTD device that is emulated in RAM
Cmtd_flashpage_t	MTD flashpage descriptor
Cmtd_jedec_id_t	Internal representation of JEDEC memory ID codes
Cmtd_mapper_parent_t	MTD mapper backing device context
Cmtd_mapper_region_t	MTD mapped region
Cmtd_native_dev	Mtd native descriptor
Cmtd_sam0_sdhc_t	Device descriptor for mtd_sdcard device
Cmtd_sdcard_t	Device descriptor for mtd_sdcard device
Cmtd_sdmmc_t	Device descriptor for a mtd_sdmmc device
Cmtd_spi_nor_opcode_t	SPI NOR flash opcode table
Cmtd_spi_nor_params_t	Compile-time parameters for a serial flash device
Cmtd_spi_nor_t	Device descriptor for serial flash memory devices
CMutex	Mutex struct within mqtt paho
Criot::mutex	C++11 compliant implementation of mutex, uses the time point implemented in our chrono replacement instead of the specified one
Cmutex_cancel_t	A cancellation structure for use with mutex_lock_cancelable and mutex_cancel
Cmutex_t	Mutex structure
Cmy9221_params_t	Parameters needed for device initialization
Cmy9221_t	Device descriptor for MY9221 LED controller
Cnanocoap_cache_entry_t	Cache container that holds a coap_pkt_t struct
Cnanocoap_fileserver_event_ctx_t	GCoAP fileserver event context
Cnanocoap_fs_dir_t	NanoCoAP remote dir struct
Cnanocoap_fs_file_t	NanoCoAP remote file struct
Cnanocoap_fs_t	NanoCoAP file system configuration
Cnanocoap_server_response_ctx_t	Context from CoAP request for separate response
Cnanocoap_sock_t	NanoCoAP socket struct
Cnative_desc_t	Native filesystem access
Cncv7356_trx	Ncv7356 trx descriptor
►Cndp_opt_t	General NDP option format
Cndp_opt_mtu_t	MTU option format
Cndp_opt_pi_t	Prefix information option format
►Cndp_opt_rdnss_t	Recursive DNS server option format without payload
Cndp_opt_rdnss_impl_t	Recursive DNS server option format with payload
Cndp_opt_rh_t	Redirected header option format
Cndp_opt_ri_t	Route information option format
Csixlowpan_nd_opt_6ctx_t	6LoWPAN context option format
Csixlowpan_nd_opt_abr_t	Authoritative border router option format
Csixlowpan_nd_opt_ar_t	Address registration option format
►Cnetdev	Structure to hold driver state
Cdose_t	DOSE netdev device
Cencx24j600_t	Encx24j600 netdev device
Cethos_t	Ethos netdev device
►Cnetdev_ieee802154_t	Extended structure to hold IEEE 802.15.4 driver state
Cat86rf215	Device descriptor for AT86RF215 radio devices
Cat86rf2xx_t	Device descriptor for AT86RF2XX radio devices
Ckw2xrf_t	Device descriptor for KW2XRF radio devices
Ckw41zrf_t	Device descriptor for KW41ZRF radio devices
Cnetdev_test_t	Device descriptor for netdev dummy test driver devices
Cslipdev_t	Device descriptor for slipdev
Csx127x_t	SX127X device descriptor
Cnetdev_ble_ctx_t	Radio context
Cnetdev_ble_pkt_t	BLE packet structure (as defined by the BLE standard)
Cnetdev_driver	Structure to hold driver interface -> function mapping
Cnetdev_eth_rx_info_t	Received frame status information for Ethernet devices
Cnetdev_ieee802154_rx_info	Received packet status information for IEEE 802.15.4 radios
Cnetdev_ieee802154_submac_t	IEEE 802.15.4 SubMAC netdev descriptor
Cnetdev_lora_rx_info_t	Received LoRa packet status information
Cnetdev_radio_rx_info	Received frame status information for most radios
Cnetdev_tap	Tap interface state
Cnetdev_tap_params_t	Tap interface initialization parameters
Cnetif_t	Network interface descriptor
Cnetopt_connect_request	Basic network connect request
Cnetopt_connect_result	Basic network connect result
Cnetopt_disconnect_request	Basic network disconnect request
Cnetopt_disconnect_result	Basic disconnect result
Cnetopt_scan_request	Basic network scan request
Cnetopt_scan_result	Basic network scan result
Cnetstats_nb_t	Stats per peer struct
Cnetstats_nb_table_t	L2 Peer Info struct
Cnetstats_rpl_block_t	One block of RPL statistics
Cnetstats_rpl_t	RPL statistics struct
Cnetstats_t	Global statistics struct
CNetwork	Network struct within mqtt paho
Cnfc_iso14443a_t	ISO14443A tag description
Cnimble_autoadv_cfg_t	Parameter set used to configure accepting connections (advertising)
Cnimble_autoconn_params_t	Set of configuration parameters needed to run autoconn
Cnimble_netif_accept_cfg_t	Parameter set used to configure accepting connections (advertising)
Cnimble_netif_conn_t	Memory layout for holding the relevant connection information
Cnimble_netif_connect_cfg_t	Parameter set used to configure connection initiation
Cnimble_rpble_cfg_t	Rpble configuration parameters
Cnimble_rpble_ctx_t	RPL DODAG information
Cnimble_scanlist_entry_t	Data structure for holding a single scanlist entry
Cnimble_scanner_cfg_t	Scanner configuration parameters
Cnimble_scanner_info_t	Additional information about received advertising packets
Cnimble_statconn_cfg_t	Statconn connection parameters
Cnrf24l01p_ng	NRF24L01+ device struct
Cnrf24l01p_ng_cfg_t	Struct that holds all active configuration values
Cnrf24l01p_ng_params_t	Struct of NRF24L01+ initialization parameters
Cnrf24l01p_t	Structure that represents the hardware setup of the nrf24l01+ transceiver
Cnrfmin_hdr_t	Header format used for our custom nrfmin link layer
Cnrfmin_pkt_t	In-memory structure of a nrfmin radio packet
Cnrfusb_t	Nrf usb peripheral device context
Cntp_packet_t	NTP packet
Cntp_timestamp_t	NTP timestamp
Cnvram	Device descriptor for generic NVRAM devices
Cnvram_spi_params	Bus parameters for SPI NVRAM
Copenwsn_gen_sock	Generic openwsn sock type
Copenwsn_radio_t	OpenWSN radio variables structure
Copt3001_params_t	Parameters needed for device initialization
Copt3001_t	Device descriptor for OPT3001 sensors
Cos_dev	Device structure
Cos_event	Event wrapper
Cos_eventq	Event queue wrapper
Cpca9633_params_t	PCA9633 device initialization parameters
Cpca9633_t	PCA9633 PWM device data structure type
Cpca9685_params_t	PCA9685 device initialization parameters
Cpca9685_saul_pwm_params_t	PCA9685 configuration structure for mapping PWM channels to SAUL
Cpca9685_t	PCA9685 PWM device data structure type
Cpcd8544_t	PCD8544 device descriptor
Cpcf857x_irq_event_t	IRQ event type
Cpcf857x_params_t	PCF857X device initialization parameters
Cpcf857x_saul_gpio_params_t	PCF857X configuration structure for mapping expander pins to SAUL
Cpcf857x_t	PCF857X device data structure type
Cph_oem	PH OEM device descriptor
Cph_oem_params	PH OEM sensor params
Cphydat_t	Generic data structure for expressing physical values
Cpio_conf_t	PIO configuration type
Cpio_gpio_init_t	Type used to configure PIO gpios pins
Cpio_i2c_bus	PIO I2C emulated bus type
Cpio_i2c_conf_t	PIO I2C configuration type
Cpio_isr_sm_vec	PIO state machine interrupt callbacks for state machine interrupts
Cpio_isr_vec	PIO interrupt callbacks for FIFO interrupts
Cpio_program_conf	PIO program configuration
Cpio_program_i2c	PIO I2C program type
Cpio_program_t	Struct that models a PIO program
Cpio_sm_clkdiv	PIO clock configuration
Cpio_sm_ctrl_regs	Internal state machine registers
Cpir_params_t	Parameters needed for device initialization
Cpir_t	Device descriptor for a PIR sensor
Cpit_conf_t	CPU specific timer PIT module configuration
Cpll_cfg_t	PLL configuration parameters
Cpn532_params_t	Data structure with the configuration parameters
Cpn532_t	Device descriptor for the PN532
Cpoly1305_ctx_t	Poly1305 context
Cppp_hdr_t	Header of a PPP packet
Cprcm_regs_t	PRCM registers
Cpriority_queue_node	Data type for priority queue nodes
Cpriority_queue_t	Data type for priority queues
Cprogress_bar_t	Progress bar descriptor
Cpsa_aead_operation_s	Structure storing an AEAD operation context
Cpsa_cipher_operation_s	Structure storing a cipher operation context
Cpsa_drv_se_aead_t	A struct containing all of the function pointers needed to implement secure element Authenticated Encryption with Additional Data operations
Cpsa_drv_se_asymmetric_t	A struct containing all of the function pointers needed to implement asymmetric cryptographic operations using secure elements
Cpsa_drv_se_cipher_t	A struct containing all of the function pointers needed to implement cipher operations using secure elements
Cpsa_drv_se_context_t	Driver context structure
Cpsa_drv_se_internal_context_t	Internal secure element driver context
Cpsa_drv_se_key_derivation_t	A struct containing all of the function pointers needed to for secure element key derivation and agreement
Cpsa_drv_se_key_management_t	A struct containing all of the function pointers needed to for secure element key management
Cpsa_drv_se_mac_t	A struct containing all of the function pointers needed to perform secure element MAC operations
Cpsa_drv_se_t	A structure containing pointers to all the entry points of a secure element driver
Cpsa_hash_operation_s	Structure containing a hash context and algorithm
Cpsa_key_attributes_s	Structure storing key attributes
Cpsa_key_derivation_operation_s	Structure storing a key derivation context
Cpsa_key_policy_s	Structure storing the key usage policies
Cpsa_key_slot_t	Structure of a virtual key slot in local memory
Cpsa_mac_operation_s	Structure storing a MAC operation context
Cpsa_se_config_t	Structure containing device specific configuration data
Cpsa_se_drv_data_s	Structure containing secure element driver data and contexts
Cpsk_params_t	PSK parameters
Cpthread_attr_t	An attribute set to supply to pthread_create()
Cpthread_barrier_t	A synchronization barrier
Cpthread_barrier_waiting_node	Internal structure to store the list of waiting threads
Cpthread_barrierattr_t	Details for a pthread_barrier_t
Cpthread_cond_t	Condition variable
Cpthread_condattr_t
Cpthread_mutexattr_t	This type is unused right now, and only exists for POSIX compatibility
Cpthread_once_t	Datatype to supply to pthread_once()
Cpthread_rwlock_t	A fair reader writer lock
Cpthread_rwlockattr_t	Attributes for a new reader/writer lock
Cpthread_spinlock_t	A spinlock
Cptp_timestamp_t	A PTP timestamp in seconds + nanoseconds since UNIX epoch
CPTRTAG	Event queue structure
Cpulse_counter_params_t	Parameters needed for device initialization
Cpulse_counter_t	Device descriptor for a pulse counter device
Cpwm_chan_conf_t	PWM channel configuration
Cpwm_chan_t	PWM channel
Cpwm_conf_chan_t	PWM channel configuration data structure
Cpwm_conf_t	PWM device configuration
Cpwm_config_t	PWM configuration structure type
Cqdec_chan_t	QDEC channel
Cqdec_conf_t	Quadrature decoder configuration struct
Cqdec_isr_ctx_t	Default interrupt context entry holding callback and argument
Cqmc5883l_params_t	QMC5883L initialization parameters
Cqmc5883l_t	QMC5883L device descriptor
Creg32_m16_t	Masked 32-bit register
Creg8_m4_t	Masked 8-bit register
Crfc_dbell_regs_t	RFC_DBELL registers
Crfc_pwr_regs_t	RFC_PWR registers
Cringbuffer_t	Ringbuffer
Criot_pipe	A generic pipe
Criotboot_flashwrite_t	Firmware update state structure
Criotboot_hdr_t	Structure to store image header - All members are little endian
Crmt_channel_config_t	RMT channel configuration
Crmutex_t	Mutex structure
Crn2xx3_params_t	Configuration parameters for RN2483/RN2903 devices
Crn2xx3_t	RN2483/RN2903 device descriptor
Crp_address_msg_t	Routing Protocol (RP) message content to request/reply notification
Crtt_hw_driver_t	RTT hardware abstraction layer driver
Csam0_aux_cfg_mapping	NVM User Row Mapping - Dedicated Entries Config values will be applied at power-on
Csam0_common_gmac_config_t	Ethernet parameters struct
Csam0_common_usb_config_t	USB peripheral parameters
Csam0_common_usb_t	Sam0 usb peripheral device context
Csam0_eth_netdev_t	Device descriptor for SAM0-ETH devices
Csaul_adc_params_t	Direct mapped ADC configuration values
Csaul_bat_voltage_params_t	SAUL battery voltage configuration values
Csaul_driver_t	Definition of the RIOT actuator/sensor interface
Csaul_gpio_params_t	Direct mapped GPIO configuration values
Csaul_pwm_channel_t	Single PWM channel exposed via SAUL
Csaul_pwm_dimmer_params_t	PWM channels mapped to dimmer-style registration entries
Csaul_pwm_rgb_params_t	PWM channels mapped to RGB LED registration entries
Csaul_reg	SAUL registry entry
Csaul_reg_info_t	Additional data to collect for each entry
Cscd30_measurement_t	Measurement from SCD30 sensor
Cscd30_params_t	Device initialization parameters
Cscd30_t	Device descriptor for the SCD30 sensor
Csched_param	This structure is unused right now, and only exists for POSIX compatibility
Cschedstat_t	Scheduler statistics
Cscheduler_vars_t	OpenWSN scheduler variables structure
Cscreen_dev_t	Screen device descriptor
Csd_status_t	SD status register (see section 4.10.2 in SD-Spec v5.00)
Csdcard_spi_params_t	Sdcard_spi device params
Csdcard_spi_t	Device descriptor for sdcard_spi
Csdhc_conf_t	SDHC peripheral configuration
Csdhc_state_t	SD Card driver context
Csdmmc_card_status_t	SD/MMC Card status as structure
Csdmmc_cid_mmc_t	CID register structure (MMC)
Csdmmc_cid_sd_t	CID register structure (SD Memory Cards)
Csdmmc_cid_t	CID register structure (SD Memory and MMC Cards)
Csdmmc_conf_t	SDMMC slot configuration
Csdmmc_csd_mmc_t	CSD register structure for MMC
Csdmmc_csd_t	CSD register (SD Memory Card and MMC)
Csdmmc_csd_v1_t	CSD register structure Version 1.0
Csdmmc_csd_v2_t	CSD register structure Version 2.0 and Version 3.0
Csdmmc_dev	SDIO/SD/MMC device descriptor
Csdmmc_driver_t	Low-level SDIO/SD/MMC peripheral driver
Csdmmc_ext_csd_t	Extended CSD (EXT_CSD) register structure (MMC only)
Csdmmc_scr_t	SCR register structure (SD Memory Card only)
Csdmmc_sd_status_t	SD Status (SD Memory Card only)
Csdmmc_xfer_desc_t	Transfer descriptor
Csdp3x_measurement_t	Measurement from SDP3x sensor
Csdp3x_params_t	Device initialization parameters
Csdp3x_t	Device descriptor for the SDP3x sensor
Csds011_data_t	Data type for storing SDS011 sensor readings
Csds011_params_t	Configuration parameters for SDS011 Laser Dust Sensor
Csds011_t	Device descriptor definition for SDS011 Laser Dust Sensor
Cseesaw_soil_params_t	Parameters needed for device initialization
Cseesaw_soil_t	Device descriptor for Seesaw Soil sensors
Csema_inv_t	An Inverse Semaphore
Csema_t	A Semaphore
Csemtech_loramac_channel_params_t	LoRaMAC channel radio parameters
Csemtech_loramac_link_check_info_t	LoRaMAC link check information
Csemtech_loramac_rx_data_t	Structure containing LoRaWAN RX data
Csemtech_loramac_t	Semtech LoRaMAC descriptor
Csenml_attr_t	SenML common record attributes
Csenml_bool_value_t	SenML boolean value
Csenml_data_value_t	SenML data value
Csenml_decfrac_t	Decimal fraction containing a value in the form of m * 10^e
Csenml_numeric_t	SenML numeric value
Csenml_string_value_t	SenML string value
Csenml_value_t	SenML string value
Cserial_msg_t	Struct containing a serial message
CSerialPort	Arduino Serial Interface
Cservo	Servo device state
Cservo_params_t	Configuration parameters for a servo
Cservo_pwm_params_t	PWM configuration parameters for a servos
Cservo_timer_ctx_t	Memory needed for book keeping when using periph_timer_periodic based servo driver
Cservo_timer_params_t	Timer configuration parameters for a servos
Csgp30_data_t	Set of measured values
Csgp30_params_t	Device initialization parameters
Csgp30_raw_data_t	Set of measured raw values
Csgp30_t	Device descriptor for the driver
Csha1_context	SHA-1 algorithm context
Csha256_chain_idx_elm_t	Sha256-chain indexed element
Csha2xx_context_t	Structure to hold the SHA-2XX context
Csha512_common_context_t	Structure to hold the SHA-512 context
Cshell_command_t	A single command in the list of the supported commands
Cshell_command_xfa_t	A single command in the list of the supported commands
Csht1x_dev_t	SHT10/11/15 temperature humidity sensor
Csht1x_params_t	Parameters required to set up the SHT10/11/15 device driver
Csht2x_params_t	Device initialization parameters
Csht2x_t	Device descriptor for the SHT2X sensor
Csht3x_dev_t	SHT3x sensor device data structure
Csht3x_params_t	SHT3x device initialization parameters
Cshtcx_params_t	Settings struct with all relevant parameters
Cshtcx_t	Device descriptor for the SHTCX
Csi1133_channel_t	Channel configuration the Si1133 sensor
Csi1133_params_t	Device initialization parameters
Csi1133_t	Device descriptor for the Si1133 sensor
Csi114x_params_t	Device initialization parameters
Csi114x_t	Device descriptor for the Si114x sensor
Csi70xx_params_t	Device initialization parameters
Csi70xx_t	Si70xx device descriptor
►Csixlowpan_frag_t	General and 1st 6LoWPAN fragmentation header
Csixlowpan_frag_n_t	Subsequent 6LoWPAN fragmentation header
Csixlowpan_sfr_ack_t	Recoverable fragment (RFRAG) acknowledgment header
Csixlowpan_sfr_rfrag_t	Recoverable fragment header
Csixlowpan_sfr_t	Generic type for selective fragment recovery headers
Cskald_ctx_t	Advertising context holding the advertising data and state
Cskald_eddystone_uid_t	Unique and opaque 16-byte beacon id format used by Eddystone
Cskald_uuid_t	UUID representation format used by Skald
Cslipdev_params_t	Configuration parameters for a slipdev
Csm_pwm_01c_data_t	LPO and concentration (ug/m3) values for small and large particles
Csm_pwm_01c_params_t	Parameters for the SM_PWM_01c sensor
Csm_pwm_01c_t	Device descriptor for the SM_PWM_01c sensor
Csm_pwm_01c_values_t	LPO and concentration (ug/m3) values for small and large particles
Csock_async_ctx_t	Asynchronous context for Asynchronous sock with event API
Csock_dtls	Information about DTLS sock
Csock_dtls_session	Information about remote client connected to the server
Csock_event_cb_t	Generalized callback type
Csock_event_t	Event definition for context scope
Csock_ip	Raw IP sock type
Csock_ip_aux_rx_t	Auxiliary data provided when receiving using an IP sock object
Csock_ip_aux_tx_t	Auxiliary data provided when sending using an IP sock object
Csock_ip_ep_t	Abstract IP end point and end point for a raw IP sock object
Csock_tcp	TCP sock type
Csock_tcp_queue	TCP queue type
Csock_udp	UDP sock type
Csock_udp_aux_rx_t	Auxiliary data provided when receiving using an UDP sock object
Csock_udp_aux_tx_t	Auxiliary data provided when sending using an UDP sock object
Csockaddr	Used to define the socket address
Csockaddr_ll	Link-Layer socket descriptor
Csocket_zep_params_t	ZEP device initialization parameters
Csocket_zep_t	ZEP device state
Csoft_spi_conf_t	Software SPI port descriptor
Csoft_uart_conf_t	Software UART port descriptor
Csomeip_hdr_t	SOME/IP header
Csomeip_message_id_t	Structure of the Message ID
Csomeip_request_id_t	Structure of the Request ID
Cspi_clk_conf_t	Datafields for static SPI clock configuration values
Cspi_conf_t	SPI device configuration
Cspi_dev_t	SPI device configuration
Cspi_gpio_mode_t	SPI gpio mode
CSPIClass	Arduino SPI interface
Cspidev_linux_conf	Static runtime configuration for SPI port + CS line
Cspidev_linux_state	Dynamic runtime state for SPI port + CS line
Cspiffs_desc	This contains everything needed to run an instance of SPIFFS
CSPISettings	Arduino SPI configuration interface
Csps30_data_t	Set of measured particulate matter values
Csps30_params_t	SPS30 device parameters
Csps30_t	SPS30 device instance
Csrf02_t	Device descriptor for SRF02 sensors
Csrf04_params_t	GPIO pins for srf04 device
Csrf04_t	Device descriptor for srf04 sensor
Csrf08_params_t	Device initialization parameters
Csrf08_t	Device descriptor for SRF08 sensors
Cst77xx_t	Device descriptor for a ST77xx display
Cstatvfs	File system information
Cstdio_provider_t	Stdio provider struct
Cstm32_usbdev_fs_config_t	Stm32 USB device FS configuration
Cstm32_usbdev_fs_t	Stm32 USB Device FS only peripheral device context
Cstmpe811_params_t	Device initialization parameters
Cstmpe811_t	Device descriptor for the STMPE811 sensor
Cstmpe811_touch_position_t	Touch position structure
Cstring_writer_t	String Writer structure
►Cstruct
Csockaddr_in	IPv4 socket address type
Csockaddr_in6	IPv6 socket address type
Csockaddr_storage	Implementation based socket address table
Csuit_component_t	SUIT component struct as decoded from the manifest
Csuit_condition_params_t	SUIT condition parameters
Csuit_manifest_t	SUIT manifest struct
Csuit_param_ref_t	SUIT parameter reference
Csuit_storage	Generic storage backend state
Csuit_storage_driver	SUIT storage backend driver struct
Csuit_storage_flashwrite_t	Riotboot flashwrite SUIT storage context
Csuit_storage_ram_region_t	Single in-memory storage region
Csuit_storage_vfs_t	Riotboot vfs SUIT storage context
Csuit_transport_mock_payload_t	Mock payload
Csx126x	Device descriptor for the driver
Csx126x_params_t	Device initialization parameters
Csx127x_internal_t	SX127X internal data
Csx127x_lora_settings_t	LoRa configuration structure
Csx127x_params_t	SX127X hardware and global parameters
Csx127x_radio_settings_t	Radio settings
Csx1280	Device descriptor for the driver
Csx1280_params_t	Device initialization parameters
Csys_mbox_t	Platform specific mailbox type
Ctc32_conf_t	Timer device configuration
Ctc_tcc_cfg_t	Common configuration for timer devices
Ctcp_hdr_opt_t	TCP option field helper structure
Ctcp_hdr_t	TCP header definition
Ctcs37727_data_t	Struct for storing TCS37727 sensor data
Ctcs37727_params_t	TCS37727 configuration parameters
Ctcs37727_t	Device descriptor for TCS37727 sensors
Criot::testing::test	Test base class
Criot::testing::test_suite	Test suite base class
CThread	Thread struct within mqtt paho
Criot::thread	C++11 compliant implementation of thread, however uses the time point from out chrono header instead of the specified one
Criot::thread_data	Holds context data for the thread
Criot::thread_data_deleter	This deleter prevents our thread data from being destroyed if the thread object is destroyed before the thread had a chance to run
Criot::thread_id	Implementation of thread::id
Criot::time_point	A time point for timed wait, as clocks from the standard are not available on RIOT
CTimer	Struct to get time references within mqtt paho
Ctimer_channel_conf_t	Configuration type of a timer channel
Ctimer_conf_t	Timer device configuration
Ctimer_dev_t	Define timer configuration values
Ctimer_isr_ctx_t	Default interrupt context entry holding callback and argument
CTimerEvent_s	Timer object description
Ctimeval	Definition of struct timeval for the atmega
Ctimex_t	A timex timestamp
Ctinyusb_dfu_device	TinyUSB DFU device interface context
Ctinyusb_netdev_t	Device descriptor for tinyUSB CDC ECM network devices
Ctja1042_trx	Tja1042 CAN trx descriptor
Ctlsf_size_container_t	Struct to hold the total sizes of free and used blocks Used for tlsf_size_walker()
Ctmp00x_params_t	Parameters needed for device initialization
Ctmp00x_t	Device descriptor for TMP00X sensors
Ctouch_dev	Generic type for a touch device
Ctouch_dev_driver_t	Generic type for a touch driver
Ctouch_dev_gesture_ctx_t	Context information for a touch device needed for gesture recognition
Ctouch_dev_reg	Touch dev registry entry
Ctouch_t	Touch coordinates
Ctpcon	The tpcon struct
Ctps6274x_params_t	TPS6274x Configuration struct
Ctps6274x_t	Device descriptor for the TPS6274x
Ctrickle_callback_t	Trickle callback function with arguments
Ctrickle_t	All state variables of a trickle timer
Ctrx_driver	Generic transceiver driver
Criot::try_to_lock_t	Tag type for try lock strategy
Ctsl2561_params_t	Device initialization parameters
Ctsl2561_t	Device descriptor for the TSL2561 sensor
Ctsl4531x_params_t	Device initialization parameters
Ctsl4531x_t	Device descriptor
Ctsrb	Thread-safe ringbuffer struct
Cturo	Turo type
CTwoWire	Class definition for the Arduino Wire library implementation
Cu8x8_riotos_t	Holds RIOT-OS specific peripheral data
Cuart_conf_t	UART device configuration
Cuart_half_duplex_dir_t	Half-duplex UART direction management method type
Cuart_half_duplex_params_t	Configuration for half-duplex UART
Cuart_half_duplex_t	Descriptor struct for half-duplex UART
Cuart_isr_ctx_t	Interrupt context for a UART device
Cuart_regs_t	UART component registers
Cucg_riotos_t	Holds RIOT-OS specific peripheral data
Cudp_hdr_t	UDP header
►Cuhcp_hdr_t	UHCP packet header struct
Cuhcp_push_t	Struct for push packets
Cuhcp_req_t	Struct for request packets
Cuint16_una_t	Unaligned access helper struct (uint16_t version)
Cuint32_una_t	Unaligned access helper struct (uint32_t version)
Cuint64_una_t	Unaligned access helper struct (uint64_t version)
Criot::unique_lock< Mutex >	C++11 compliant implementation of unique lock
Cuniversal_address_container_t	The container descriptor used to identify a universal address entry
Curi_parser_query_param_t	Container to represent a query parameter
Curi_parser_result_t	Container that holds all results
Cusb_desc_acm_t	USB CDC ACM descriptor
Cusb_desc_call_mngt_t	USB CDC call management functional descriptor
Cusb_desc_cdc_t	Generic USB CDC descriptor
Cusb_desc_cdcecm_speed_t	USB CDC ECM connection speed change notification
Cusb_desc_ecm_t	USB CDC ECM descriptor
Cusb_desc_hid_t	USB HID descriptor struct
Cusb_desc_if_dfu_t	USB DFU interface descriptor
Cusb_desc_union_t	USB union descriptor
Cusb_descriptor_configuration_t	USB configuration descriptor (USB 2.0 spec table 9-10)
Cusb_descriptor_device_t	USB device descriptor (USB 2.0 spec table 9-8)
Cusb_descriptor_endpoint_t	USB endpoint descriptor (USB 2.0 spec table 9-13)
Cusb_descriptor_interface_association_t	USB interface association descriptor (Interface Association Descriptors table 9-Z)
Cusb_descriptor_interface_t	USB interface descriptor (USB 2.0 spec table 9-12)
Cusb_descriptor_string_t	USB string descriptor (USB 2.0 spec table 9-16)
Cusb_req_cdcacm_coding_t	USB CDC ACM line coding setup content
Cusb_setup_t	USB setup packet (USB 2.0 spec table 9-2)
Cusbdev	Usbdev device descriptor
Cusbdev_driver	Usbdev driver functions
Cusbdev_ep	Usbdev endpoint descriptor
Cusbdev_mock	Usbdev mock device
Cusbdev_mock_ep_t	Usbdev mock device endpoint
Cusbus	USBUS context struct
Cusbus_cdcacm_device	USBUS CDC ACM context struct
Cusbus_cdcecm_device	USBUS CDC ECM device interface context
Cusbus_control_handler_t	Endpoint zero event handler
Cusbus_control_slicer_t	Helper struct to divide control messages in multiple parts
Cusbus_descr_gen	USBUS descriptor generator
Cusbus_descr_gen_funcs_t	USBUS descriptor generator function pointers
Cusbus_dfu_device	USBUS DFU device interface context
Cusbus_endpoint	USBUS endpoint context
Cusbus_handler	USBUS handler struct
Cusbus_handler_driver	USBUS event handler function pointers
Cusbus_hid_device	USBUS HID context struct
Cusbus_interface	USBUS interface
Cusbus_interface_alt	USBUS interface alternative setting
Cusbus_msc_device	USBUS MSC device interface context
Cusbus_msc_lun	USBUS MSC Logical Unit descriptor
Cusbus_string	USBUS string type
Cusbus_urb	USBUS USB request/response block
Cut_process_var_t	Name-value-pair of a variable for URI template expansion
Cuuid_t	UUID layout
Cuwb_dw1000_t	Device descriptor for the driver
Cdcf77_bits_t::values	Struct of bitfields
Cvcdiff_mtd_t	Context for the underlying MTD device
Cvcdiff_vfs_t	Context for the underlying file
Cvcnl40x0_params_t	Device initialization parameters
Cvcnl40x0_t	Device descriptor for the VCNL40X0 sensor
Cveml6070_params_t	Device initialization parameters
Cveml6070_t	Device descriptor for the VEML6070 sensor
Cvfs_DIR	Internal representation of a file system directory entry
Cvfs_dir_ops	Operations on open directories
Cvfs_dirent_t	User facing directory entry
Cvfs_file_ops	Operations on open files
Cvfs_file_system_ops	Operations on mounted file systems
Cvfs_file_system_t	A file system driver
Cvfs_file_t	Information about an open file
Cvfs_mount_struct	A mounted file system
Cvims_regs_t	VIMS registers
Cvl6180x_int_config_t	Interrupt config
Cvl6180x_int_thresh_t	Interrupt threshold configuration
Cvl6180x_params_t	VL6180X device configuration
Cvl6180x_t	VL6180X sensor device data structure type
Cw5100_params_t	W5100 device descriptor
Cw5100_t	Device descriptor for W5100 devices
Cw5500	Device descriptor for W5500 devices
Cw5500_params_t	W5500 device descriptor
Cwdt_regs_t	WDT registers
Cwifi_connect_request	A Wi-Fi connect request
Cwifi_connect_result	A Wi-Fi connect result
Cwifi_disconnect_request	A Wi-Fi disconnect request
Cwifi_disconnect_result	A Wi-Fi disconnect result
Cwifi_scan_list_node	Node type in a wifi scan list wifi_scan_list_t
Cwifi_scan_request	A Wi-Fi scan request
Cwifi_scan_result	A Wi-Fi scan result
Cwifi_security_wep_psk	A WEP pre-shared-key
Cwifi_security_wpa_enterprise	WPA2 Enterprise credentials
Cwifi_security_wpa_psk	A WPA pre-shared-key
CWORD_ALIGNED	Power Management mode blocker typedef
Cws281x_params_t	Struct to hold initialization parameters for a WS281x RGB LED
Cws281x_t	Device descriptor of a WS281x RGB LED chain
Cxbee_l2hdr_t	Data structure for extraction L2 information of received packets
Cxbee_params_t	Configuration parameters for XBee devices
Cxbee_t	XBee device descriptor
Cxtimer	Xtimer timer structure
Cxtimer_ticks32_t	Xtimer timestamp (32 bit)
Cxtimer_ticks64_t	Xtimer timestamp (64 bit)
►Czep_hdr_t	ZEP header definition
Czep_v1_hdr_t	ZEPv1 header definition
Czep_v2_ack_hdr_t	ZEPv2 header definition (type == Ack)
Czep_v2_data_hdr_t	ZEPv2 header definition (type == Data)
Cztimer64_base	Minimum information for each timer
Cztimer64_clock	Ztimer64 clock structure
Cztimer64_t	Ztimer64 structure
Cztimer_base	Minimum information for each timer
Cztimer_clock	Ztimer device structure
Cztimer_convert_frac_t	Ztimer_convert_frac frequency conversion layer class
Cztimer_convert_muldiv64_t	Ztimer_convert_muldiv64 structure
Cztimer_convert_shift_t	Ztimer_convert_shift frequency conversion layer class
Cztimer_convert_t	Base type for ztimer convert modules
Cztimer_mock_t	Ztimer mock clock class
Cztimer_ops_t	Ztimer backend method structure
Cztimer_periodic_t	Ztimer periodic structure
Cztimer_periph_timer_t	Ztimer periph context structure
Cztimer_stopwatch_t	Ztimer stop watch struct
Cztimer_t	Ztimer structure