LIS2DH12_CTRL_REG4_t Union Reference

CTRL_REG4 definitions. More...

Detailed Description

CTRL_REG4 definitions.

Definition at line 250 of file lis2dh12_registers.h.

#include <lis2dh12_registers.h>

Data Fields
struct {
uint8_t   SPIM:1
	SPI serial interface mode selection (SIM) More...
uint8_t   ST:2
	Self-test enable. More...
uint8_t   HR:1
	Operating mode. More...
uint8_t   FS:2
	Full-scale selection. More...
uint8_t   BLE:1
	Big/Little endian data selection. More...
uint8_t   BDU:1
	Block data update. More...
}	bit
	Structure used for bit access.
uint8_t	reg
	Type used for register access.

Field Documentation

BDU

uint8_t LIS2DH12_CTRL_REG4_t::BDU

Block data update.

Definition at line 257 of file lis2dh12_registers.h.

BLE

uint8_t LIS2DH12_CTRL_REG4_t::BLE

Big/Little endian data selection.

Definition at line 256 of file lis2dh12_registers.h.

FS

uint8_t LIS2DH12_CTRL_REG4_t::FS

Full-scale selection.

Definition at line 255 of file lis2dh12_registers.h.

HR

uint8_t LIS2DH12_CTRL_REG4_t::HR

Operating mode.

Definition at line 254 of file lis2dh12_registers.h.

reg

uint8_t LIS2DH12_CTRL_REG4_t::reg

Type used for register access.

Definition at line 259 of file lis2dh12_registers.h.

SPIM

uint8_t LIS2DH12_CTRL_REG4_t::SPIM

SPI serial interface mode selection (SIM)

Definition at line 252 of file lis2dh12_registers.h.

ST

uint8_t LIS2DH12_CTRL_REG4_t::ST

Self-test enable.

Definition at line 253 of file lis2dh12_registers.h.

---

The documentation for this union was generated from the following file:

• drivers/lis2dh12/include/lis2dh12_registers.h