Board specific definitions and implementations. More...
Board specific definitions and implementations.
The boards module contains all definitions and implementations that are specific to a certain board. Generally, boards consist of a fixed configuration of a controller and some external devices such as sensors or radios. All aspects concerning configuration of GPIO pins, MCU clock and device drivers should go into this module.
There is no single best board to buy for use with RIOT, as hardware design involves many trade-offs. The challenge is to clearly assess the use case and collect the requirements and to find the best match for those.
With this in mind, it is still possible to give some hints and recommendations:
Board | Use Case | Performance | Integrated Debugger | Integrated Networking | Native USB | Arduino Headers | Other Connectors | Integrated Sensors/... | Breadboard Friendly | Costs | Remarks |
---|---|---|---|---|---|---|---|---|---|---|---|
Arduino Due | Education | ++ | ✔ | ✗ | ✔ | +++ (Uno, Mega, ISP) | ✗ | - (1 LED) | + | o | Better buy the nrf52840dk |
Arduino Mega 2560 | You have them anyway | -- | ✗ | ✗ | ✗ | +++ (Uno, Mega, ISP) | ✗ | - (1 LED) | + | -- | Better buy the nrf52840dk |
Arduino Uno | You have them anyway | --- | ✗ | ✗ | ✗ | ++ (Uno, ISP) | ✗ | - (1 LED) | + | -- | You like pain, don't you? |
STM32 Nucleo-32 | Development | -/o/+/++ | ✔ | ✗ | ✗ | o (Nano) | Custom | o (1 button, 1 LED) | + | ++ | Good bang for the buck |
STM32 Nucleo-64 | Development | o/+/++ | ✔ | ✗ | ✗ | + (Uno) | ST Morpho Headers | o (1 button, 1 LED) | + | ++ | Good bang for the buck |
STM32 Nucleo-144 | Development | +/++/+++ | ✔ | (✔) (some have Ethernet) | ✔ | ++ (Uno, Mega) | ST Morpho Headers | + (1 button, 3 LEDs) | + | ++ | Good bang for the buck |
ESP32-Ethernet-Kit | Development | +++ | ✔ | ✔ (WiFi, BLE, Ethernet, custom) | ✗ | ✗ | Custom | - (1 button) | + | o | Requires proprietary software |
Generic ESP32-WROOM-32 boards | Prototyping | +++ | ✗ | ✔ (WiFi, BLE, custom) | ✗ | ✗ | Custom | - (1 button) | +++ | +++ | Requires proprietary software |
BBC micro:bit v2 | Education | ++ | ✔ | ✔ (802.15.4, BLE, custom) | ✗ | ✗ | micro:bit edge connector | +++ (6 buttons, LED matrix, mic, speaker, IMO) | -- | ++ | Good education board |
nRF52840 DK | Development | ++ | ✔ | ✔ (802.15.4, BLE, custom) | ✔ | +++ (Uno, Mega) | Custom | + (4 buttons, 4 LEDs) | + | + | Good wireless dev board |
Adafruit Feather nRF52840 Sense | Prototyping/Education | ++ | ✗ | ✔ (802.15.4, BLE, custom) | ✔ | ✗ | Adafruit Feather | ++ (orientation, air parameters, light/gestures) | +++ | + | used in inetrg exercises |
nRF52840-Dongle | Prototyping | ++ | ✗ | ✔ (802.15.4, BLE, custom) | ✔ | ✗ | Custom | o (1 button, 4 LEDs) | ++ | ++ | Excellent border router |
STM32 Nucleo-WL55JC | Development | ++ | ✔ | ✔ (LoRa) | ✗ | + (Uno) | ST Morpho Headers | + (3 buttons, 3 LEDs) | + | ++ | Good bang for the buck |
PineTime | Gadget | ++ | ✗ | ✔ (BLE) | ✗ | ✗ | ✗ | +++ (LCD, button, touch screen, IMU, flash, ...) | --- | +++ | Buy two: One with SWD access |
Atmel SAM R21 Xplained Pro | Development | + | ✔ | ✔ (802.15.4) | ✔ | ✗ | XPRO Expansion Header | o (1 button, 1 LED) | + | -- | Quite expensive |
Microchip SAM R34 Xplained Pro | Development | ++ | ✔ | ✔ (LoRa) | ✔ | ✗ | XPRO Expansion Header | o (1 button, 2 LEDs) | + | --- | Got a spare kidney to sell? |
WeAct-F411CE board | Prototyping | ++ | ✗ | ✗ | ✔ | ✗ | Custom | + (1 button, 1 LED, SPI flash) | +++ | +++ | Excellent bang for the buck |
This list was last updated in April 2024
+++
) only if it is fully compatible with both Arduino Uno and Arduino Mega Shields (including SPI via ISP connector)++
) if it is fully compatible with Arduino Uno shields (including SPI via ISP connector)++
) if it is partially compatible with both Arduino Uno and Arduino Mega Shields (no SPI via ISP connector)+
) if it is partially compatible with Arduino Uno Shields (no SPI via ISP connector)+
) if it is fully compatible with Arduino Nano Shields (including SPI via ISP connector)o
) if it is partially compatible with Arduino Nano ShieldsThe following are the steps to take to locate specific pinouts on boards. This is useful when connecting external hardware to RIOT supported boards.
boards/<BOARD>/include/periph_conf.h
for board specific peripherals such as UART or SPI pinsboards/<BOARD>/include/board.h
for GPIO specific pins such as LED0
or BTN0
boards/common/<COMMON_BOARD_OR_CPU>/include/periph_conf_common.h
for shared pins that are the same for many different boards (board_common.h or others will be available too)boards/common/<COMMON_BOARD_OR_CPU>/include/<PERIPH_DECLARATION>
also may contain specific periphirals such as PERIPH_DECLARATION = cfg_i2c1_pb8_pb9.h
which indicates I2C pins are on pb8 and pb9PORTA = PORT_A = PA = 0
or PORTB = PORT_B = PB = 1
and pin number, such as PA, 1
, correlate that to the board (the board may either have the designators or search online to find which GPIO corresponds to physical location on the board)GPIO
with the specific pin and connect the wiresThe following will be different examples of how to find pinouts
boards/samr21-xpro/include/periph_conf.h
the scl_pin = GPIO_PIN(PA, 17)
and the sda_pin = GPIO_PIN(PA, 16)
PA16
and PA17
The dev number is only the location in the array and does not mean the number of the peripheral
boards/nucleo-f103rb/include/periph_conf.h
the rx_pin = GPIO_PIN(PORT_A, 10)
, the tx_pin = GPIO_PIN(PORT_A, 9)
and the dev = USART1
, though device 1 can equal any USARTn numberPA_10
or UART1_RX
and the tx_pin can be found on CN5-1 using either PA_9
or UART1_TX
, it is recommended to use the GPIO pin as sometimes the peripheral may be using an alternate pin Modules | |
ACD52832 | |
Support for the aconno™ ACD52832. | |
ATmega common | |
Shared files and configuration for ATmega-based boards. | |
ATmega328p Xplained Mini | |
Support for using the ATmega328p Xplained Mini board. | |
ATxmega common | |
Shared files and configuration for ATxmega-based boards. | |
ATxmega-A1 Xplained board | |
Support for the ATxmega-A1 Xplained board. | |
ATxmega-A1U Xplained Pro board | |
Support for the ATxmega-A1U Xplained Pro board. | |
ATxmega-A3BU Xplained board | |
Support for the ATxmega-A3BU Xplained board. | |
Acmesystems YARM board | |
Support for the Acmesystems YARM board. | |
Adafruit Clue | |
Support for the Adafruit Clue. | |
Adafruit Feather M0 | |
Support for the Adafruit Feather M0. | |
Adafruit Feather M0 LoRa | |
Support for the Adafruit Feather M0 LoRa. | |
Adafruit Feather M0 WiFi | |
Support for the Adafruit Feather M0 WiFi. | |
Adafruit Feather nRF52840 Express | |
Support for the Adafruit Feather nRF52840 Express. | |
Adafruit Feather nRF52840 Sense | |
Support for the Adafruit Feather nRF52840 Sense. | |
Adafruit Grand Central M4 Express | |
Support for the Adafruit Grand Central M4 Express. | |
Adafruit Metro M4 Express | |
Support for the Adafruit Metro M4 Express. | |
Adafruit PyBadge | |
Support for the Adafruit PyBadge board. | |
Adafruit-Itsybitsy-M4 | |
Support for the Adafruit-Itsybitsy-M4. | |
Adafruit-Itsybitsy-nRF52 | |
Support for the Adafruit-Itsybitsy-nRF52. | |
Airfy Beacon | |
Support for the Airfy Beacon board. | |
Alientek Pandora | |
Support for the Alientek Pandora board. | |
Arduino Due | |
Support for the Arduino Due board. | |
Arduino Duemilanove | |
Support for the Arduino Duemilanove board. | |
Arduino Leonardo | |
Support for the Arduino Leonardo board. | |
Arduino MKR WAN 1300 | |
Support for the Arduino MKR WAN 1300 board. | |
Arduino MKR1000 | |
Support for the Arduino MKR1000 board. | |
Arduino MKRFOX1200 | |
Support for the Arduino MKRFOX1200 board. | |
Arduino MKRZERO | |
Support for the Arduino MKRZERO board. | |
Arduino Mega 2560 | |
Support for the Arduino Mega 2560 board. | |
Arduino Nano | |
Support for the Arduino Nano board. | |
Arduino Nano 33 BLE | |
Support for the Arduino Nano 33 BLE. | |
Arduino Nano 33 BLE sense | |
Support for the Arduino Nano 33 BLE Sense. | |
Arduino Nano 33 IoT | |
Support for the Arduino Nano 33 IoT board. | |
Arduino Uno | |
Support for the Arduino Uno board. | |
Arduino Zero | |
Support for the Arduino Zero board. | |
Atmega256RFR2 Xplained Pro | |
Support for the Atmega256RFR2 Xplained Pro board. | |
Atmega256RFR2 rss2 | |
Support for the Radio Sensors Atmega256RFR2 rss2 board. | |
Atmel SAM D10 Xplained Mini | |
Support for the Atmel SAM D10 Xplained Mini board. | |
Atmel SAM D20 Xplained Pro | |
Support for the Atmel SAM D20 Xplained Pro board. | |
Atmel SAM D21 Xplained Pro | |
Support for the Atmel SAM D21 Xplained Pro board. | |
Atmel SAM L21 Xplained Pro | |
Support for the Atmel SAM L21 Xplained Pro board. | |
Atmel SAM R21 Xplained Pro | |
Support for the Atmel SAM R21 Xplained Pro board. | |
Atmel SAM R30 Xplained Pro | |
Support for the Atmel SAM R30 Xplained Pro board. | |
Avsextrem | |
Support for the Avsextrem board. | |
BBC micro:bit | |
Support for the BBC micro:bit. | |
BBC micro:bit v2 | |
Support for the BBC micro:bit v2. | |
BastWAN board | |
Support for the BASTWAN SAM R34 board. | |
Blackpill STM32F103C8 board | |
Support for the stm32f103c8 based blackpill board. | |
Blackpill STM32F103CB board (128KiB flash) | |
Support for the stm32f103c8 based blackpill board. | |
Bluepill STM32F103C8 board | |
Support for the stm32f103c8 based bluepill board. | |
Bluepill STM32F103CB board (128KiB flash) | |
Support for the stm32f103cb based bluepill board. | |
CC2538DK | |
Support for the Texas Instruments CC2538DK board. | |
CC2650STK | |
Support for the SimpleLink™ CC2650 sensor tag. | |
Calliope mini | |
Support for the Calliope mini. | |
Common Board Groups | |
Common definitions and implementations for board groups. | |
Decawave DWM1001 | |
Support for the Decawave DWM1001 development board. | |
Dragino LSN50 LoRa Sensor Node | |
Support for the Dragino LSN50 LoRa Sensor Node. | |
E104-BT5010A Test Board | |
Support for the Ebyte E104-BT5010A Test Board (nRF52810) | |
E104-BT5011A Test Board | |
Support for the Ebyte E104-BT5011A Test Board (nRF52811) | |
EK-LM4F120XL | |
Support for the Stellaris Launchpad LM4F120 board. | |
ESP32 Boards | |
This group of boards contains the documentation of ESP32 boards. | |
ESP32-C3 Boards | |
This group of boards contains the documentation of ESP32-C3 boards. | |
ESP32-S2 Boards | |
This group of boards contains the documentation of ESP32-S2 boards. | |
ESP32-S3 Boards | |
This group of boards contains the documentation of ESP32-S3 boards. | |
ESP8266 Boards | |
This group of boards contains the documentation defined ESP8266 boards. | |
Ebyte E180-ZG120B-TB Test Board | |
Support for Ebyte E180-ZG120B-TB Test Board. | |
Eistec Mulle | |
Support for Eistec Mulle IoT boards. | |
F4VI1 | |
Support for the F4VI1 board. | |
Firefly Board | |
Support for the Firefly board. | |
Freescale FRDM-KW41Z Board | |
Support for the FRDM-KW41Z. | |
GBA | |
Support for the GBA. | |
GD32VF103C-START | |
Support for the GD32VF103C-START board. | |
Generic CC2538-CC2592-DK Board | |
Support for the 3rd party CC2538-CC2592-DK board. | |
HamiltonIoT Hamilton | |
Support for the HamiltonIoT Hamilton board. | |
IKEA TRÅDFRI modules | |
Support for the IKEA TRÅDFRI modules. | |
IoT-LAB A8 M3 open node | |
Support for iotlab-m3 board. | |
IoT-LAB M3 open node | |
Support for the iotlab-m3 board. | |
LimiFrog Version 1 | |
Support for the limifrog-v1 board. | |
LoRa-E5 Development Board - STM32WLE5JC | |
Support for the LoRa-E5 Development Board - STM32WLE5JC. | |
Lobaro Lorabox | |
Support for the Lobaro LoraBox with stm32l151cb-a. | |
MCB2388 Evaluation Board | |
Support for the MCB2388 Evaluation Board. | |
MSB-430 | |
Support for the ScatterWeb Modular Sensor Board 430. | |
MSB-430H | |
Support for the ScatterWeb MSB-430H board. | |
MSB-A2 | |
Support for the ScatterWeb MSB-A2 board. | |
MSB-IoT | |
Support for the MSB-IoT board. | |
Mega1284P-Xplained | |
Support for the Mega1284P-Xplained board. | |
Microchip SAM E54 Xplained Pro | |
Support for the Microchip SAM E54 Xplained Pro board. | |
Microchip SAM R34 Xplained Pro | |
Support for the Microchip SAM R34 Xplained Pro and WLR089 Xplained Pro. | |
Microchip SAML10 Xplained Pro | |
Support for the Microchip SAML10 Xplained Pro board. | |
Microchip SAML11 Xplained Pro | |
Support for the Microchip SAML11 Xplained Pro board. | |
Microchip SAML1X | |
Support for SAML10 and SAML11 boards. | |
Microduino CoreRF | |
Support for the Microduino CoreRF board. | |
NRF6310 (Nordic NRF Hardware Development Kit) | |
Support for the nRF51 boards: nrf6310 or MOMMOSOFT BLE DEVKIT.N. | |
NXP FRDM-K22F Board | |
Support for the NXP FRDM-K22F. | |
NXP FRDM-K64F Board | |
Support for the NXP FRDM-K64F. | |
NXP FRDM-KL43Z Board | |
Support for the NXP FRDM-KL43Z. | |
NXP USB-KW41Z Board | |
Support for the USB-KW41Z. | |
NZ32-SC151 | |
Support for the Modtronix nz32-sc151 board. | |
Native Board | |
Support for running RIOT in native. | |
Native64 Board | |
Support for running RIOT in native64. | |
Nordic Thingy:52 | |
Support for the Nordic Thingy:52 board. | |
Olimex MSP430-H1611 | |
Support for the Olimex MSP430-H1611 board. | |
Olimex MSP430-H2618 | |
Support for the Olimex MSP430-H2618 board. | |
OpenCM9.04 | |
Support for the OpenCM9.04 board. | |
OpenMote-b | |
Support for the OpenMote-b board. | |
OpenMote-cc2538 | |
Support for the OpenMote-cc2538 board. | |
Particle Argon | |
Support for the Particle Argon. | |
Particle Boron | |
Support for the Particle Boron. | |
Particle Mesh common | |
Common support for the Particle Mesh boards family (Xenon, Argon, Boron) | |
Particle Xenon | |
Support for the Particle Xenon. | |
PhyNODE KW41Z | |
Support for the Phytec PhyNODE KW41Z Board. | |
Phytec reel board | |
Support for the PHYTEC 'reel board'. | |
PineTime | |
Support for the Pinetime. | |
QN9080DK base board | |
Support for the QN9080DK base board. | |
RE-Mote Prototype A | |
Support for the RE-Mote board prototype A. | |
RE-Mote Revision A | |
Support for the RE-Mote board Revision A. | |
RE-Mote Revision B | |
Support for the RE-Mote board Revision B. | |
Raspberry Pi Pico | |
Support for the RP2040 based Raspberry Pi Pico board. | |
Raspberry Pi Pico W | |
Support for the RP2040 based Raspberry Pi Pico W board. | |
RuuviTag | |
Support for the RuuviTag board. | |
SODAQ Autonomo | |
Support for the SODAQ Autonomo board. | |
SODAQ ExpLoRer | |
Support for the SODAQ ExpLoRer board. | |
SODAQ ONE | |
Support for the SODAQ ONE board. | |
SODAQ SARA AFF | |
Support for the SODAQ SARA AFF boards. | |
SODAQ SARA SFF | |
Support for the SODAQ SARA SFF boards. | |
ST B-L072Z-LRWAN1 LoRa discovery | |
Support for the ST B-L072Z-LRWAN1 board. | |
ST B-L475E-IOT01A | |
Support for the ST B-L475E-IOT01A board. | |
ST I-NUCLEO-LRWAN1 LoRa board | |
Support for the ST I-NUCLEO-LRWAN1 LoRa board shield. | |
ST P-L496G-CELL02 | |
Support for the ST P-L496G-CELL02 board. | |
STM32 B-U585I-IOT02A | |
Support for the STM32 B-U585I-IOT02A. | |
STM32 Nucleo-144 | |
Support for STM32 Nucleo-144 boards. | |
STM32 Nucleo-32 | |
Support for STM32 Nucleo-32 boards. | |
STM32 Nucleo-64 | |
Support for STM32 Nucleo-64 boards. | |
STM32 Olimexino-stm32 | |
Support for the Olimexino STM32 board. | |
STM32 p-nucleo-wb55 | |
Support for the STM32 p-nucleo-wb55. | |
STM32F030C8 based Bluepill | |
Support for the STM32F030C8 based Bluepill. | |
STM32F030F4 Demo Board | |
Support for the STM32F030F4 Demo Board. | |
STM32F0Discovery | |
Support for the STM32F0Discovery board. | |
STM32F3Discovery | |
Support for the STM32F3Discovery board. | |
STM32F429I-DISC1 | |
Support for the STM32F429I-DISC1 board. | |
STM32F429I-DISCO | |
Support for the STM32F429I-DISCO board. | |
STM32F469I-DISCO | |
Support for the STM32F469I-DISCO board. | |
STM32F4Discovery | |
Support for the STM32F4Discovery board. | |
STM32F723E-DISCO board | |
Support for the STM32F723E-DISCO board. | |
STM32F746G-DISCO | |
Support for the STM32F746G-DISCO board. | |
STM32F750N8-DK | |
Support for the STM32F750N8-DK board. | |
STM32F769I-DISCO board | |
Support for the STM32F769I-DISCO board. | |
STM32G0316-DISCO | |
Support for the STM32G0316-DISCO board. | |
STM32L0538-DISCO | |
Support for the STM32L0538-DISCO board. | |
STM32L476G-DISCO | |
Support for the STM32L476G-DISCO board. | |
STM32L496G-DISCO | |
Support for the STM32L496G-DISCO board. | |
STM32MP157C-DK2 board | |
Support for the STM32MP157C-DK2 board. | |
SeeedStudio GD32 RISC-V board | |
Support for the SeeedStudio GD32 RISC-V board. | |
Seeeduino Arch Pro development kit | |
Support for the Seeeduino Arch Pro board. | |
Seeeduino XIAO | |
Support for the Seeeduino XIAO. | |
SenseBox MCU with SAMD21 | |
Support for the SenseBox MCU with SAMD21 board. | |
Serpente R2 | |
Support for the Serpente board. | |
SiFive HiFive1 RISC-V board | |
Support for the SiFive HiFive1 RISC-V board. | |
SiFive HiFive1b RISC-V board | |
Support for the SiFive HiFive1b RISC-V board. | |
Silicon Labs SLSTK3400A starter kit | |
Support for Silicon Labs SLSTK3400A starter kit. | |
Silicon Labs SLSTK3401A starter kit | |
Support for Silicon Labs SLSTK3401A starter kit. | |
Silicon Labs SLSTK3402A starter kit | |
Support for Silicon Labs SLSTK3402A starter kit. | |
Silicon Labs SLSTK3701A starter kit | |
Support for Silicon Labs SLSTK3701A starter kit. | |
Silicon Labs SLTB001A starter kit | |
Support for Silicon Labs SLTB001A starter kit. | |
Silicon Labs SLTB009A starter kit | |
Support for Silicon Labs SLTB009A starter kit. | |
Silicon Labs SLWSTK6000B starter kit | |
Support for the Silicon Labs SLWSTK6000B starter kit. | |
Silicon Labs SLWSTK6220A starter kit | |
Support for Silicon Labs SLWSTK6220A starter kit. | |
Silicon Labs STK3200 starter kit | |
Support for Silicon Labs STK3200 starter kit. | |
Silicon Labs STK3600 starter kit | |
Support for Silicon Labs STK3600 starter kit. | |
Silicon Labs STK3700 starter kit | |
Support for Silicon Labs STK3700 starter kit. | |
Silicon Labs xG23-PK6068A starter kit | |
Support for the xG23-PK6068A board. | |
Sipeed Longan Nano | |
Support for the Sipeed Longan Nano board. | |
Sipeed Longan Nano with TFT | |
Support for the Sipeed Longan Nano board with TFT display. | |
Spark-Core | |
Support for the spark-core board. | |
Standalone ATmega1284P | |
Support for using the ATmega1284P as standalone board. | |
Standalone ATmega328p | |
Support for using the ATmega328p as standalone board. | |
Standalone ATmega8 | |
Support for using the ATmega8 as standalone board. | |
TI CC1312 LaunchPad | |
Texas Instruments SimpleLink(TM) CC1312 Wireless MCU LaunchPad(TM) Kit. | |
TI CC1350 LaunchPad XL | |
Texas Instruments SimpleLink(TM) CC1350 Wireless MCU LaunchPad(TM) Kit. | |
TI CC1352 LaunchPad | |
Texas Instruments SimpleLink(TM) CC1352 Wireless MCU LaunchPad(TM) Kit. | |
TI CC1352P LaunchPad | |
Texas Instruments SimpleLink(TM) CC1352P Wireless MCU LaunchPad(TM) Kit. | |
TI CC2650 LaunchPad XL | |
Texas Instruments SimpleLink(TM) CC2650 Wireless MCU LaunchPad(TM) Kit. | |
Teensy3.1 & 3.2 | |
Support for the Teensy3.1 & 3.2. | |
TelosB | |
Support for the TelosB board. | |
UDOO | |
Support for the UDOO board. | |
Ublox C030-U201 | |
Support for the Ublox C030-U201 board. | |
Waspmote PRO v1.2 | |
Support for the Waspmote PRO v1.2 board. | |
Waveshare nRF52840 Eval Kit | |
Support for the Waveshare nRF52840 Eval Kit. | |
WeAct-F401CC board | |
Support for the WeAct-F401CC Board. | |
WeAct-F401CE board | |
Support for the WeAct-F401CE Board. | |
WeAct-F411CE board | |
Support for the WeAct-F411CE Board. | |
WeAct-G030F6 board | |
Support for the WeAct-G030F6 board. | |
WeMos Arduino Zero Clone | |
Support for the WeMos Arduino Zero Clone board. | |
Yunjia NRF51822 | |
Support for the Yunjia NRF51822 board. | |
Zigduino | |
Support for the Zigduino board. | |
Zolertia Z1 | |
Support for the Zolertia Z1 board. | |
deRFmega128 modules from Dresden Elektronik | |
Support for deRFmega128 modules produced by Dresden Elektronik. | |
deRFmega256 modules from Dresden Elektronik | |
Support for deRFmega256 modules produced by Dresden Elektronik. | |
im880b | |
Support for the im880b with stm32l151cb-a. | |
maple-mini | |
Support for the maple-mini board. | |
mbed LPC1768 development kit | |
Support for the mbed LPC1768 board. | |
nRF51 Dongle | |
Support for the Nordic nRF51 Dongle. | |
nRF51DK Development Kit | |
Support for the Nordic nRF51DK Development Kit. | |
nRF52 DK | |
Support for the nRF52 DK. | |
nRF52832-MDK | |
Support for the nRF52832-MDK. | |
nRF52840 DK | |
Support for the nRF52840 DK. | |
nRF52840 MDK USB Dongle | |
Support for the nRF52840 MDK USB Dongle. | |
nRF52840-Dongle | |
Support for the nRF52840-Dongle. | |
nRF52840-MDK | |
Support for the nRF52840-MDK. | |
nRF5340DK | |
Support for the nRF5340DK-app board. | |
nRF9160DK | |
Support for the nRF9160DK board. | |
omote | |
Support for the omote board. | |
openlabs.co kw41z-mini board | |
Support for openlabs-kw41z-mini. | |
openlabs.co kw41z-mini-256kib board | |
Support for openlabs-kw41z-mini (256kib Version) | |
phyWAVE-KW22 Board | |
Support for the phyWAVE evaluation board. | |
pyboard | |
Support for the pyboard. | |