Loading...
Searching...
No Matches
periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-l433rc board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-l433rc board.

Author
Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_tim2.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define CONFIG_BOARD_HAS_LSE   1
 

UART configuration

#define UART_0_ISR   (isr_lpuart1)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

I2C configuration

#define I2C_0_ISR   isr_i2c1_er
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

Macro Definition Documentation

◆ CONFIG_BOARD_HAS_LSE

#define CONFIG_BOARD_HAS_LSE   1

Definition at line 24 of file periph_conf.h.

◆ I2C_0_ISR

#define I2C_0_ISR   isr_i2c1_er

Definition at line 139 of file periph_conf.h.

◆ I2C_NUMOF

#define I2C_NUMOF   ARRAY_SIZE(i2c_config)

Definition at line 141 of file periph_conf.h.

◆ PWM_NUMOF

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)

Definition at line 94 of file periph_conf.h.

◆ SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 117 of file periph_conf.h.

◆ UART_0_ISR

#define UART_0_ISR   (isr_lpuart1)

Definition at line 71 of file periph_conf.h.

◆ UART_1_ISR

#define UART_1_ISR   (isr_usart1)

Definition at line 72 of file periph_conf.h.

◆ UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 74 of file periph_conf.h.

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 7),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR1_I2C1EN,
.rcc_sw_mask = RCC_CCIPR_I2C2SEL_1,
.irqn = I2C1_ER_IRQn
},
}
@ PORT_B
port B
Definition periph_cpu.h:48
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition periph_cpu.h:46
@ I2C_SPEED_NORMAL
normal mode: ~100 kbit/s
Definition periph_cpu.h:278
@ GPIO_AF4
use alternate function 4
Definition cpu_gpio.h:106
@ APB1
Advanced Peripheral Bus 1
Definition periph_cpu.h:79

Definition at line 124 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM1,
.rcc_mask = RCC_APB2ENR_TIM1EN,
.chan = { { .pin = GPIO_PIN(PORT_A, 8) , .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF1,
.bus = APB2
}
}
@ PORT_A
port A
Definition periph_cpu.h:47
#define GPIO_UNDEF
Definition of a fitting UNDEF value.
@ GPIO_AF1
use alternate function 1
Definition cpu_gpio.h:103
@ APB2
Advanced Peripheral Bus 2
Definition periph_cpu.h:80

Definition at line 81 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = SPI_CS_UNDEF,
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB1ENR1_SPI2EN,
.apbbus = APB1
}
}
@ GPIO_AF5
use alternate function 5
Definition cpu_gpio.h:107
#define SPI_CS_UNDEF
Define value for unused CS line.
Definition periph_cpu.h:363

Definition at line 101 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = LPUART1,
.rcc_mask = RCC_APB1ENR2_LPUART1EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rx_af = GPIO_AF8,
.tx_af = GPIO_AF8,
.bus = APB12,
.irqn = LPUART1_IRQn,
.type = STM32_LPUART,
.clk_src = 0,
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB2,
.irqn = USART1_IRQn,
.type = STM32_USART,
.clk_src = 0,
}
}
@ GPIO_AF8
use alternate function 8
Definition cpu_gpio.h:111
@ GPIO_AF7
use alternate function 7
Definition cpu_gpio.h:109
@ STM32_LPUART
STM32 Low-power UART (LPUART) module type.
Definition cpu_uart.h:39
@ STM32_USART
STM32 USART module type.
Definition cpu_uart.h:38

Definition at line 40 of file periph_conf.h.