No Matches
STM32 Nucleo-G071RB

Support for the STM32 Nucleo-G071RB. More...

Detailed Description

Support for the STM32 Nucleo-G071RB.


The Nucleo-G071RB is a board from ST's Nucleo family supporting a ARM Cortex-M0+ STM32G071RB microcontroller with 36KiB of RAM and 128KiB of Flash.

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-g071rb PROGRAMMER=cpy2remed flash
This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates could be found on this STM webpage.


file  periph_conf.h
 Peripheral MCU configuration for the nucleo-g071rb board.