STM32 Nucleo-C031C6

Support for the STM32 Nucleo-C031C6. More...

Detailed Description

Support for the STM32 Nucleo-C031C6.

Overview

The Nucleo-C031C6 is a board from ST's Nucleo family supporting a ARM Cortex-M0+ STM32C031C6 microcontroller with 12KiB of RAM and 32KiB of Flash.

MCU

MCU	STM32C031C6
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	12KiB
Flash	32KiB
Frequency	up to 48MHz
FPU	no
Timers	12 (2x watchdog, 1 SysTick, 5x 16-bit)
ADCs	1x 12-bit (up to 19 channels)
UARTs	2
SPIs	1
I2Cs	1
RTC	1
Vcc	2.0V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-c031c6 PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates could be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-c031c6 board.