STM32 Nucleo-L073RZ

Support for the STM32 Nucleo-L073RZ. More...

Detailed Description

Support for the STM32 Nucleo-L073RZ.


The Nucleo-L073RZ is a board from ST's Nucleo family supporting ARM Cortex-M0 STM32L073RZT6 microcontroller with 20KiB of RAM and 192KiB of Flash.


Pinout for the nucleo-l073rz

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-l073rz PROGRAMMER=cpy2remed flash
This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.


file  periph_conf.h
 Peripheral MCU configuration for the nucleo-l073rz board.