Loading...
Searching...
No Matches
STM32 Nucleo-G070RB

Support for the STM32 Nucleo-G070RB. More...

Detailed Description

Support for the STM32 Nucleo-G070RB.

Overview

The Nucleo-G070RB is a board from ST's Nucleo family supporting a ARM Cortex-M0+ STM32G070RB microcontroller with 36KiB of RAM and 128KiB of Flash.

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-g070rb PROGRAMMER=cpy2remed flash
Note
This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates could be found on this STM webpage.

Files

file  periph_conf.h
 Peripheral MCU configuration for the nucleo-g070rb board.