No Matches
periph_conf.h File Reference

Peripheral MCU configuration for the ST B-U585I-IOT02A board. More...

Detailed Description

Peripheral MCU configuration for the ST B-U585I-IOT02A board.

Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_timer_tim5.h"
#include "cfg_usb_otg_fs_u5.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.


UART configuration

#define UART_0_ISR   (isr_usart1)
#define UART_1_ISR   (isr_usart3)
#define UART_2_ISR   (isr_usart2)
#define UART_3_ISR   (isr_uart4)
#define UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t uart_config []

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t spi_config []

I2C configuration

#define I2C_0_ISR   isr_i2c1_er
#define I2C_1_ISR   isr_i2c2_er
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t i2c_config []

Macro Definition Documentation



Definition at line 24 of file periph_conf.h.

◆ I2C_0_ISR

#define I2C_0_ISR   isr_i2c1_er

Definition at line 179 of file periph_conf.h.

◆ I2C_1_ISR

#define I2C_1_ISR   isr_i2c2_er

Definition at line 180 of file periph_conf.h.


#define I2C_NUMOF   ARRAY_SIZE(i2c_config)

Definition at line 181 of file periph_conf.h.


#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 145 of file periph_conf.h.


#define UART_0_ISR   (isr_usart1)

Definition at line 91 of file periph_conf.h.


#define UART_1_ISR   (isr_usart3)

Definition at line 92 of file periph_conf.h.


#define UART_2_ISR   (isr_usart2)

Definition at line 93 of file periph_conf.h.


#define UART_3_ISR   (isr_uart4)

Definition at line 94 of file periph_conf.h.


#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 96 of file periph_conf.h.

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
Initial value:
= {
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR1_I2C1EN,
.rcc_sw_mask = RCC_CCIPR1_I2C1SEL_1,
.irqn = I2C1_ER_IRQn,
.dev = I2C2,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_H, 4),
.sda_pin = GPIO_PIN(PORT_H, 5),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR1_I2C2EN,
.rcc_sw_mask = RCC_CCIPR1_I2C2SEL_1,
.irqn = I2C2_ER_IRQn,
port B
Definition periph_cpu.h:48
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition periph_cpu.h:46
port H
Definition periph_cpu.h:52
normal mode: ~100 kbit/s
Definition periph_cpu.h:278
use alternate function 4
Definition cpu_gpio.h:106
@ APB1
Advanced Peripheral Bus 1
Definition periph_cpu.h:79

Definition at line 152 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]

Definition at line 103 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]

Definition at line 40 of file periph_conf.h.