STM32 Nucleo-L031K6

Support for the STM32 Nucleo-L031K6. More...

Detailed Description

Support for the STM32 Nucleo-L031K6.

Overview

The Nucleo-L031K6 is a board from ST's Nucleo family supporting ARM Cortex-M0 STM32L031K6T6 microcontroller with 8KiB of RAM and 32KiB of Flash.

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-l031k6 PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-l031k6 board.