STM32 Nucleo-F746ZG

Support for the STM32 Nucleo-F746ZG. More...

Detailed Description

Support for the STM32 Nucleo-F746ZG.

Overview

The Nucleo-F746ZG is a board from ST's Nucleo family supporting ARM Cortex-M7 STM32F746ZG microcontroller with 320KiB of RAM and 1 MiB of Flash.

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-f746zg PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-f746zg board.