Pin definitions and board configuration options for LoRa-E5 Development Board. More...

Detailed Description

Pin definitions and board configuration options for LoRa-E5 Development Board.

Author: Francisco Molina franc.nosp@m.ois-.nosp@m.xavie.nosp@m.r.mo.nosp@m.lina@.nosp@m.inri.nosp@m.a.yyf.nosp@m.r

Definition in file board.h.

#include "kernel_defines.h"
#include "stm32_leds.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	CONFIG_LORA_E5_DEV_ENABLE_3P3V 1
	Enable 3.3V output. More...

#define	CONFIG_LORA_E5_DEV_ENABLE_5V 1
	Enable 5V output. More...

#define	LORA_E5_DEV_3P3V_ENABLE_PIN GPIO_PIN(PORT_A, 9)
	lora-e5-dev 3.3V gpio enable pin More...

#define	LORA_E5_DEV_5V_ENABLE_PIN GPIO_PIN(PORT_B, 10)
	lora-e5-dev 5V gpio enable pin More...

Sub-GHz radio (LoRa) configuration
#define	SX126X_PARAM_SPI (SPI_DEV(0))

#define	SX126X_PARAM_TX_PA_MODE SX126X_RF_MODE_TX_HPA

LED pin definitions and handlers
#define	LED0_PORT_NUM PORT_B

#define	LED0_PIN_NUM 5

User button
#define	BTN0_PIN GPIO_PIN(PORT_B, 13)

#define	BTN0_MODE GPIO_IN_PU

#define	BTN1_PIN GPIO_PIN(PORT_A, 0)

#define	BTN1_MODE GPIO_IN_PU

RF 3-port switch (SP3T) control
Refer Section 6.6.3 RF Overview in User Manual (UM2592)
#define	FE_CTRL1 GPIO_PIN(PORT_A, 4)

#define	FE_CTRL2 GPIO_PIN(PORT_A, 5)

Macro Definition Documentation

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN_PU

Definition at line 58 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO_PIN(PORT_B, 13)

Definition at line 57 of file board.h.

◆ BTN1_MODE

#define BTN1_MODE GPIO_IN_PU

Definition at line 60 of file board.h.

◆ BTN1_PIN

#define BTN1_PIN GPIO_PIN(PORT_A, 0)

Definition at line 59 of file board.h.

◆ CONFIG_LORA_E5_DEV_ENABLE_3P3V

#define CONFIG_LORA_E5_DEV_ENABLE_3P3V 1

Enable 3.3V output.

Definition at line 77 of file board.h.

◆ CONFIG_LORA_E5_DEV_ENABLE_5V

#define CONFIG_LORA_E5_DEV_ENABLE_5V 1

Enable 5V output.

Definition at line 83 of file board.h.

◆ FE_CTRL1

#define FE_CTRL1 GPIO_PIN(PORT_A, 4)

Definition at line 69 of file board.h.

◆ FE_CTRL2

#define FE_CTRL2 GPIO_PIN(PORT_A, 5)

Definition at line 70 of file board.h.

◆ LED0_PIN_NUM

#define LED0_PIN_NUM 5

Definition at line 50 of file board.h.

◆ LED0_PORT_NUM

#define LED0_PORT_NUM PORT_B

Definition at line 49 of file board.h.

◆ LORA_E5_DEV_3P3V_ENABLE_PIN

#define LORA_E5_DEV_3P3V_ENABLE_PIN GPIO_PIN(PORT_A, 9)

lora-e5-dev 3.3V gpio enable pin

Definition at line 88 of file board.h.

◆ LORA_E5_DEV_5V_ENABLE_PIN

#define LORA_E5_DEV_5V_ENABLE_PIN GPIO_PIN(PORT_B, 10)

lora-e5-dev 5V gpio enable pin

Definition at line 92 of file board.h.

◆ SX126X_PARAM_SPI

#define SX126X_PARAM_SPI (SPI_DEV(0))

Definition at line 36 of file board.h.

◆ SX126X_PARAM_TX_PA_MODE

#define SX126X_PARAM_TX_PA_MODE SX126X_RF_MODE_TX_HPA

Definition at line 37 of file board.h.