No Matches
TinyUSB package

Provides the tinyUSB stack as package. More...

Detailed Description

Provides the tinyUSB stack as package.

Gunar Schorcht gunar.nosp@m.@sch.nosp@m.orcht.nosp@m..net
See also


tinyUSB is an open-source cross-platform USB Host/Device stack for embedded systems.

This package is distinct from (and incompatible with) the USB stack provided around USBUS in RIOT (see USB). They differ in the level of abstraction and in the set of supported devices.


Add the following entries to your application makefile:

Either add tinyusb_setup() to your main function to explicitly initialize the tinyUSB stack including the used peripherals and start the tinyUSB thread, or use the auto_init module (default).

int main(void)
// If auto-initialization is not used (module `auto_init`),
// initialize the tinyUSB stack including used peripherals and
// start the tinyUSB thread. Auto-initialization is used by default.
while (1) {
return 0;
int tinyusb_setup(void)
Initialize the tinyUSB stack including used peripherals and start the tinyUSB thread.

If it is necessary to override the default configuration defined in tusb_config.h, create a file tinyusb_app_config.h in your application directory and override the configuration to be changed.


By default, the number of CONFIG_TUSBD_*_NUMOF device class and CONFIG_TUSBH_*_NUMOF host class interfaces are defined to 1 if the corresponding tinyusb_class_* and tinyusb_device/tinyusb_host module are enabled, and 0 otherwise. That is, there is one interface of each class.

For example, if the tinyusb_device and tinyusb_class_cdc modules are enabled, CONFIG_TUSBD_CDC_NUMOF is defined to 1 by default. The number of all other CONFIG_TUSBD_*_NUMOF device class interfaces are 0.

If you add the tinyusb_app_config.h file in your application directory to override the default configuration, add the application path to the include paths at the end of your application's Makefile. This is necessary so that the tinyUSB stack uses the file tinyusb_app_config.h from your application directory and thus the file tusb_config.h from the tinyUSB package.

USEPKG += tinyusb
USEMODULE += tinyusb_class_cdc
USEMODULE += tinyusb_class_msc
USEMODULE += tinyusb_device
include $(RIOTBASE)/Makefile.include

Implement the callbacks of the enabled classes.

For most common device classes and their configuration, the tinyUSB package automatically generates the required descriptors and descriptor callbacks for any combination of

Any other combination, either a different number of these device class interfaces or the use of a different device class interface, requires the implementation of custom descriptors and the callbacks.

All symbols of the generated descriptors and their callback functions are defined as weak symbols so that the application can override parts of the descriptors or the callback functions that handle them. For example, the array tusb_desc_hid_0_report, which defines the HID report descriptor for HID device 0, making the device a generic in/out HID device

uint8_t const tusb_desc_hid_0_report[] =

could be overridden by the application with

uint8_t const tusb_desc_hid_0_report[] =

to make the device to be a composite keyboard/mouse device.

Please refer $RIOTBASE/tests/pkg/tinyusb_cdc_msc and the tinyUSB documentation for details.


 TinyUSB netdev driver
 TinyUSB netdev driver for CDC ECM, CDC NCM and RNDIS protocol.
 riotboot tinyUSB DFU


file  tinyusb_hw_defaults.h
 STM32 specific default configurations for tinyUSB.
file  tinyusb.h
file  tinyusb_descriptors.h
 TinyUSB commonn descriptor implementation.
file  tusb_config.h
 TinyUSB default configurations.
file  tusb_os_custom.h
 TinyUSB OS Abstraction Layer for RIOT.
file  tinyusb_hw.h
 TinyUSB hardware driver API.
file  tinyusb_hw_defaults.h
 Hardware specific default configurations for tinyUSB.