Loading...
Searching...
No Matches
periph_conf.h File Reference

Peripheral MCU configuration for the OLIMEXINO STM32 board. More...

Detailed Description

Peripheral MCU configuration for the OLIMEXINO STM32 board.

Author
Corentin Vigourt cvigo.nosp@m.urt@.nosp@m.scall.nosp@m.og.c.nosp@m.om

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
+ Include dependency graph for periph_conf.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

#define CONFIG_BOARD_HAS_LSE   1
 
#define CONFIG_BOARD_HAS_HSE   1
 

ADC configuration

#define ADC_NUMOF   ARRAY_SIZE(adc_config)
 
static const adc_conf_t adc_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

Timer configuration

#define TIMER_0_ISR   isr_tim2
 
#define TIMER_1_ISR   isr_tim3
 
#define TIMER_2_ISR   isr_tim4
 
#define TIMER_NUMOF   ARRAY_SIZE(timer_config)
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_2_ISR   (isr_usart3)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

Real time counter configuration

#define RTT_FREQUENCY   (16384) /* in Hz */
 

I2C configuration

Note
This board may require external pullup resistors for i2c operation.
#define I2C_0_ISR   isr_i2c1_ev
 
#define I2C_1_ISR   isr_i2c2_ev
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

Macro Definition Documentation

◆ ADC_NUMOF

#define ADC_NUMOF   ARRAY_SIZE(adc_config)

Definition at line 52 of file periph_conf.h.

◆ CONFIG_BOARD_HAS_HSE

#define CONFIG_BOARD_HAS_HSE   1

Definition at line 29 of file periph_conf.h.

◆ CONFIG_BOARD_HAS_LSE

#define CONFIG_BOARD_HAS_LSE   1

Definition at line 24 of file periph_conf.h.

◆ I2C_0_ISR

#define I2C_0_ISR   isr_i2c1_ev

Definition at line 216 of file periph_conf.h.

◆ I2C_1_ISR

#define I2C_1_ISR   isr_i2c2_ev

Definition at line 217 of file periph_conf.h.

◆ I2C_NUMOF

#define I2C_NUMOF   ARRAY_SIZE(i2c_config)

Definition at line 219 of file periph_conf.h.

◆ PWM_NUMOF

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)

Definition at line 102 of file periph_conf.h.

◆ RTT_FREQUENCY

#define RTT_FREQUENCY   (16384) /* in Hz */

Definition at line 183 of file periph_conf.h.

◆ SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 247 of file periph_conf.h.

◆ TIMER_0_ISR

#define TIMER_0_ISR   isr_tim2

Definition at line 133 of file periph_conf.h.

◆ TIMER_1_ISR

#define TIMER_1_ISR   isr_tim3

Definition at line 134 of file periph_conf.h.

◆ TIMER_2_ISR

#define TIMER_2_ISR   isr_tim4

Definition at line 135 of file periph_conf.h.

◆ TIMER_NUMOF

#define TIMER_NUMOF   ARRAY_SIZE(timer_config)

Definition at line 137 of file periph_conf.h.

◆ UART_0_ISR

#define UART_0_ISR   (isr_usart2)

Definition at line 171 of file periph_conf.h.

◆ UART_1_ISR

#define UART_1_ISR   (isr_usart1)

Definition at line 172 of file periph_conf.h.

◆ UART_2_ISR

#define UART_2_ISR   (isr_usart3)

Definition at line 173 of file periph_conf.h.

◆ UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 175 of file periph_conf.h.

Variable Documentation

◆ adc_config

const adc_conf_t adc_config[]
static
Initial value:
= {
{ GPIO_PIN(PORT_C, 0), 0, 10 },
{ GPIO_PIN(PORT_C, 1), 0, 11 },
{ GPIO_PIN(PORT_C, 2), 0, 12 },
{ GPIO_PIN(PORT_C, 3), 0, 13 },
{ GPIO_PIN(PORT_C, 4), 0, 14 },
{ GPIO_PIN(PORT_C, 5), 0, 15 }
}
@ PORT_C
port C
Definition periph_cpu.h:49
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition periph_cpu.h:46

Definition at line 43 of file periph_conf.h.

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C1EN,
.clk = CLOCK_APB1,
.irqn = I2C1_EV_IRQn
},
{
.dev = I2C2,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 10),
.sda_pin = GPIO_PIN(PORT_B, 11),
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C2EN,
.clk = CLOCK_APB1,
.irqn = I2C2_EV_IRQn
}
}
@ PORT_B
port B
Definition periph_cpu.h:48
@ I2C_SPEED_NORMAL
normal mode: ~100 kbit/s
Definition periph_cpu.h:278
@ APB1
Advanced Peripheral Bus 1
Definition periph_cpu.h:79

Definition at line 193 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static

Definition at line 59 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
},
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = GPIO_UNDEF,
.rccmask = RCC_APB1ENR_SPI2EN,
.apbbus = APB1
}
}
@ PORT_A
port A
Definition periph_cpu.h:47
#define GPIO_UNDEF
Definition of a fitting UNDEF value.
@ APB2
Advanced Peripheral Bus 2
Definition periph_cpu.h:80

Definition at line 226 of file periph_conf.h.

◆ timer_config

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM2,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM3,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.bus = APB1,
.irqn = TIM3_IRQn
},
{
.dev = TIM4,
.max = 0x0000ffff,
.rcc_mask = RCC_APB1ENR_TIM4EN,
.bus = APB1,
.irqn = TIM4_IRQn
}
}

Definition at line 109 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.bus = APB1,
.irqn = USART2_IRQn
},
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 10),
.tx_pin = GPIO_PIN(PORT_A, 9),
.bus = APB2,
.irqn = USART1_IRQn
},
{
.dev = USART3,
.rcc_mask = RCC_APB1ENR_USART3EN,
.rx_pin = GPIO_PIN(PORT_B, 11),
.tx_pin = GPIO_PIN(PORT_B, 10),
.bus = APB1,
.irqn = USART3_IRQn
}
}

Definition at line 144 of file periph_conf.h.