periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-f091rc board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-f091rc board.

Author
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_i2c1_pb8_pb9.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define CONFIG_BOARD_HAS_HSE   1
 
#define CONFIG_BOARD_HAS_LSE   1
 

DMA streams configuration

#define DMA_SHARED_ISR_0   isr_dma1_ch2_3_dma2_ch1_2
 
#define DMA_SHARED_ISR_0_STREAMS   { 0, 1 } /* Indexes 0 and 1 of dma_config share the same isr */
 
#define DMA_NUMOF   ARRAY_SIZE(dma_config)
 
static const dma_conf_t dma_config []
 

Timer configuration

#define TIMER_0_ISR   isr_tim1_cc
 
#define TIMER_NUMOF   ARRAY_SIZE(timer_config)
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_2_ISR   (isr_usart3_8)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

ADC configuration

#define ADC_NUMOF   ARRAY_SIZE(adc_config)
 
static const adc_conf_t adc_config []
 

Variable Documentation

◆ adc_config

const adc_conf_t adc_config[]
static
Initial value:
= {
{ GPIO_PIN(PORT_A, 0), 0 },
{ GPIO_PIN(PORT_A, 1), 1 },
{ GPIO_PIN(PORT_A, 4), 4 },
{ GPIO_PIN(PORT_B, 0), 8 },
{ GPIO_PIN(PORT_C, 1), 11 },
{ GPIO_PIN(PORT_C, 0), 10 }
}
port C
Definition: periph_cpu.h:38
port A
Definition: periph_cpu.h:36
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
port B
Definition: periph_cpu.h:37

Definition at line 193 of file periph_conf.h.

◆ dma_config

const dma_conf_t dma_config[]
static
Initial value:
= {
{ .stream = 1 },
{ .stream = 2 },
}

Definition at line 44 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM2,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.chan = { { .pin = GPIO_PIN(PORT_B, 3) , .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_B, 10) , .cc_chan = 2 },
{ .pin = GPIO_PIN(PORT_B, 11) , .cc_chan = 3 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF2,
.bus = APB1
},
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = { { .pin = GPIO_PIN(PORT_B, 4) , .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_C, 7) , .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2 },
{ .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3 } },
.af = GPIO_AF0,
.bus = APB1
}
}
port C
Definition: periph_cpu.h:38
#define GPIO_UNDEF
Definition of a fitting UNDEF value.
Advanced Peripheral Bus 1.
Definition: periph_cpu.h:44
use alternate function 2
use alternate function 0
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
port B
Definition: periph_cpu.h:37

Definition at line 163 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_PIN(PORT_B, 6),
.mosi_af = GPIO_AF0,
.miso_af = GPIO_AF0,
.sclk_af = GPIO_AF0,
.cs_af = GPIO_AF0,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2,
}
}
Advanced Peripheral Bus 2.
Definition: periph_cpu.h:45
port A
Definition: periph_cpu.h:36
use alternate function 0
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
port B
Definition: periph_cpu.h:37

Definition at line 134 of file periph_conf.h.

◆ timer_config

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM1,
.max = 0x0000ffff,
.rcc_mask = RCC_APB2ENR_TIM1EN,
.bus = APB2,
.irqn = TIM1_CC_IRQn
}
}
Advanced Peripheral Bus 2.
Definition: periph_cpu.h:45

Definition at line 59 of file periph_conf.h.