periph_conf.h File Reference
#include "periph_cpu.h"
#include "f4/cfg_clock_180_8_1.h"
#include "cfg_i2c1_pb8_pb9.h"
#include "cfg_spi_divtable.h"
#include "cfg_timer_tim5.h"
#include "cfg_usb_otg_fs.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

DMA streams configuration

#define DMA_0_ISR   isr_dma2_stream3
 
#define DMA_1_ISR   isr_dma2_stream2
 
#define DMA_NUMOF   ARRAY_SIZE(dma_config)
 
static const dma_conf_t dma_config []
 

UART configuration

#define UART_0_ISR   (isr_usart3)
 
#define UART_1_ISR   (isr_usart6)
 
#define UART_2_ISR   (isr_usart2)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

Variable Documentation

◆ dma_config

const dma_conf_t dma_config[]
static
Initial value:
= {
{ .stream = 11 },
{ .stream = 10 },
}

Definition at line 37 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM1,
.rcc_mask = RCC_APB2ENR_TIM1EN,
.chan = { { .pin = GPIO_PIN(PORT_E, 9) , .cc_chan = 0},
{ .pin = GPIO_PIN(PORT_E, 11) , .cc_chan = 1},
{ .pin = GPIO_PIN(PORT_E, 13) , .cc_chan = 2},
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
.af = GPIO_AF1,
.bus = APB2
},
{
.dev = TIM4,
.rcc_mask = RCC_APB1ENR_TIM4EN,
.chan = { { .pin = GPIO_PIN(PORT_D, 15) , .cc_chan = 3},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
.af = GPIO_AF2,
.bus = APB1
},
}
#define GPIO_UNDEF
Definition of a fitting UNDEF value.
use alternate function 1
use alternate function 2
port E
Definition: periph_cpu.h:40
port D
Definition: periph_cpu.h:39
APB1 bus.
Definition: periph_cpu.h:146
APB2 bus.
Definition: periph_cpu.h:147
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 108 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2,
},
}
#define GPIO_UNDEF
Definition of a fitting UNDEF value.
use alternate function 5
port A
Definition: periph_cpu.h:36
APB2 bus.
Definition: periph_cpu.h:147
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 138 of file periph_conf.h.