periph_conf.h File Reference

Configuration of CPU peripherals for the Adafruit Metro M4 Express. More...

Detailed Description

Configuration of CPU peripherals for the Adafruit Metro M4 Express.

Author

Marian Buschsieweke maria.nosp@m.n.bu.nosp@m.schsi.nosp@m.ewek.nosp@m.e@pos.nosp@m.teo..nosp@m.net

Definition in file periph_conf.h.

#include "periph_cpu.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

Macros
#define	USE_VREG_BUCK   (1)
	Enable the internal DC/DC converter The board is equipped with L_EXT (L1) of 10uH at VSW pin.

Core clock frequency
#define	CLOCK_CORECLOCK   MHZ(120)

32kHz Oscillator configuration
#define	EXTERNAL_OSC32_SOURCE   1
#define	INTERNAL_OSC32_SOURCE   0
#define	ULTRA_LOW_POWER_INTERNAL_OSC_SOURCE   0

ADC Configuration
#define	ADC_GCLK_SRC   SAM0_GCLK_PERIPH
	clock used for ADC
#define	ADC_PRESCALER   ADC_CTRLA_PRESCALER_DIV8
#define	ADC_NEG_INPUT   ADC_INPUTCTRL_MUXNEG(0x18u)
#define	ADC_REF_DEFAULT   ADC_REFCTRL_REFSEL_INTVCC1
#define	ADC_NUMOF   ARRAY_SIZE(adc_channels)
static const adc_conf_chan_t	adc_channels []

DAC configuration
#define	DAC_CLOCK   SAM0_GCLK_TIMER
#define	DAC_VREF   DAC_CTRLB_REFSEL_VREFPU

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

RTT configuration
#define	RTT_FREQUENCY   (32768U)

Timer peripheral configuration
#define	TIMER_0_CHANNELS   2
#define	TIMER_0_ISR   isr_tc0
#define	TIMER_1_CHANNELS   2
#define	TIMER_1_ISR   isr_tc2
#define	TIMER_NUMOF   ARRAY_SIZE(timer_config)
static const tc32_conf_t	timer_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

UART configuration
#define	UART_0_ISR   isr_sercom3_2
#define	UART_0_ISR_TX   isr_sercom3_0
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

USB peripheral configuration
static const sam0_common_usb_config_t	sam_usbdev_config []

Macro Definition Documentation

ADC_GCLK_SRC

#define ADC_GCLK_SRC   SAM0_GCLK_PERIPH

clock used for ADC

Definition at line 56 of file periph_conf.h.

ADC_NEG_INPUT

#define ADC_NEG_INPUT   ADC_INPUTCTRL_MUXNEG(0x18u)

Definition at line 58 of file periph_conf.h.

ADC_NUMOF

#define ADC_NUMOF   ARRAY_SIZE(adc_channels)

Definition at line 71 of file periph_conf.h.

ADC_PRESCALER

#define ADC_PRESCALER   ADC_CTRLA_PRESCALER_DIV8

Definition at line 57 of file periph_conf.h.

ADC_REF_DEFAULT

#define ADC_REF_DEFAULT   ADC_REFCTRL_REFSEL_INTVCC1

Definition at line 59 of file periph_conf.h.

CLOCK_CORECLOCK

#define CLOCK_CORECLOCK   MHZ(120)

Definition at line 33 of file periph_conf.h.

DAC_CLOCK

#define DAC_CLOCK   SAM0_GCLK_TIMER

Definition at line 79 of file periph_conf.h.

DAC_VREF

#define DAC_VREF   DAC_CTRLB_REFSEL_VREFPU

Definition at line 84 of file periph_conf.h.

EXTERNAL_OSC32_SOURCE

#define EXTERNAL_OSC32_SOURCE   1

Definition at line 41 of file periph_conf.h.

I2C_NUMOF

#define I2C_NUMOF   ARRAY_SIZE(i2c_config)

Definition at line 103 of file periph_conf.h.

INTERNAL_OSC32_SOURCE

#define INTERNAL_OSC32_SOURCE   0

Definition at line 42 of file periph_conf.h.

RTT_FREQUENCY

#define RTT_FREQUENCY   (32768U)

Definition at line 111 of file periph_conf.h.

SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 210 of file periph_conf.h.

TIMER_0_CHANNELS

#define TIMER_0_CHANNELS   2

Definition at line 141 of file periph_conf.h.

TIMER_0_ISR

#define TIMER_0_ISR   isr_tc0

Definition at line 142 of file periph_conf.h.

TIMER_1_CHANNELS

#define TIMER_1_CHANNELS   2

Definition at line 145 of file periph_conf.h.

TIMER_1_ISR

#define TIMER_1_ISR   isr_tc2

Definition at line 146 of file periph_conf.h.

TIMER_NUMOF

#define TIMER_NUMOF   ARRAY_SIZE(timer_config)

Definition at line 148 of file periph_conf.h.

UART_0_ISR

#define UART_0_ISR   isr_sercom3_2

Definition at line 257 of file periph_conf.h.

UART_0_ISR_TX

#define UART_0_ISR_TX   isr_sercom3_0

Definition at line 258 of file periph_conf.h.

UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 260 of file periph_conf.h.

ULTRA_LOW_POWER_INTERNAL_OSC_SOURCE

#define ULTRA_LOW_POWER_INTERNAL_OSC_SOURCE   0

Definition at line 43 of file periph_conf.h.

USE_VREG_BUCK

#define USE_VREG_BUCK   (1)

Enable the internal DC/DC converter The board is equipped with L_EXT (L1) of 10uH at VSW pin.

Definition at line 50 of file periph_conf.h.

Variable Documentation

adc_channels

const adc_conf_chan_t adc_channels[]

static

Initial value:

= {
    
    { .inputctrl = ADC0_INPUTCTRL_MUXPOS_PA02, .dev = ADC0 }, 
    { .inputctrl = ADC0_INPUTCTRL_MUXPOS_PA05, .dev = ADC0 }, 
    { .inputctrl = ADC0_INPUTCTRL_MUXPOS_PA06, .dev = ADC0 }, 
    { .inputctrl = ADC0_INPUTCTRL_MUXPOS_PA04, .dev = ADC0 }, 
    { .inputctrl = ADC1_INPUTCTRL_MUXPOS_PB08, .dev = ADC1 }, 
    { .inputctrl = ADC1_INPUTCTRL_MUXPOS_PB09, .dev = ADC1 }, 
}

Definition at line 61 of file periph_conf.h.

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev      = &(SERCOM5->I2CM),
        .speed    = I2C_SPEED_NORMAL,
        .scl_pin  = GPIO_PIN(PB, 3),   
        .sda_pin  = GPIO_PIN(PB, 2),   
        .mux      = GPIO_MUX_D,
        .gclk_src = SAM0_GCLK_PERIPH,
        .flags    = I2C_FLAG_NONE
    },
}

Definition at line 91 of file periph_conf.h.

sam_usbdev_config

const sam0_common_usb_config_t sam_usbdev_config[]

static

Initial value:

= {
    {
        .dm     = GPIO_PIN(PA, 24),
        .dp     = GPIO_PIN(PA, 25),
        .d_mux  = GPIO_MUX_H,
        .device = &USB->DEVICE,
        .gclk_src = SAM0_GCLK_PERIPH,
    }
}

Definition at line 217 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Definition at line 155 of file periph_conf.h.

timer_config

const tc32_conf_t timer_config[]

static

Initial value:

= {
    {   
        .dev            = TC0,
        .irq            = TC0_IRQn,
        .mclk           = &MCLK->APBAMASK.reg,
        .mclk_mask      = MCLK_APBAMASK_TC0 | MCLK_APBAMASK_TC1,
        .gclk_id        = TC0_GCLK_ID,
        .gclk_src       = SAM0_GCLK_TIMER,
        .flags          = TC_CTRLA_MODE_COUNT32,
    },
    {   
        .dev            = TC2,
        .irq            = TC2_IRQn,
        .mclk           = &MCLK->APBBMASK.reg,
        .mclk_mask      = MCLK_APBBMASK_TC2 | MCLK_APBBMASK_TC3,
        .gclk_id        = TC2_GCLK_ID,
        .gclk_src       = SAM0_GCLK_TIMER,
        .flags          = TC_CTRLA_MODE_COUNT32,
    }
}

Definition at line 119 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
 
    
    {
        .dev      = &SERCOM3->USART,
        .rx_pin   = GPIO_PIN(PA, 23),   
        .tx_pin   = GPIO_PIN(PA, 22),   
 
 
 
 
        .mux      = GPIO_MUX_C,
        .rx_pad   = UART_PAD_RX_1,
        .tx_pad   = UART_PAD_TX_0,
        .flags    = UART_FLAG_NONE,
        .gclk_src = SAM0_GCLK_PERIPH,
    },
}

Definition at line 232 of file periph_conf.h.