periph_conf.h File Reference

Peripheral MCU configuration for the B-L475E-IOT01A board. More...

Detailed Description

Peripheral MCU configuration for the B-L475E-IOT01A board.

Author
Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "cfg_rtt_default.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

Clock system configuration

#define CLOCK_HSE   (0)
 
#define CLOCK_LSE   (1)
 
#define CLOCK_MSI_ENABLE   (1)
 
#define CLOCK_MSI_LSE_PLL   (1)
 
#define CLOCK_CORECLOCK   (80000000U)
 
#define CLOCK_PLL_M   (6)
 
#define CLOCK_PLL_N   (20)
 
#define CLOCK_PLL_R   (2)
 
#define CLOCK_AHB_DIV   RCC_CFGR_HPRE_DIV1
 
#define CLOCK_AHB   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_APB1_DIV   RCC_CFGR_PPRE1_DIV4
 
#define CLOCK_APB1   (CLOCK_CORECLOCK / 4)
 
#define CLOCK_APB2_DIV   RCC_CFGR_PPRE2_DIV2
 
#define CLOCK_APB2   (CLOCK_CORECLOCK / 2)
 

Timer configuration

#define TIMER_0_ISR   isr_tim5
 
#define TIMER_NUMOF   ARRAY_SIZE(timer_config)
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart1)
 
#define UART_1_ISR   (isr_uart4)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

Note
The spi_divtable is auto-generated from cpu/stm32_common/dist/spi_divtable/spi_divtable.c
#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const uint8_t spi_divtable [2][5]
 
static const spi_conf_t spi_config []
 

I2C configuration

#define I2C_0_ISR   isr_i2c1_er
 
#define I2C_1_ISR   isr_i2c2_er
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR1_I2C1EN,
.irqn = I2C1_ER_IRQn,
},
{
.dev = I2C2,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 10),
.sda_pin = GPIO_PIN(PORT_B, 11),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR1_I2C2EN,
.irqn = I2C2_ER_IRQn,
},
}
use alternate function 4
APB1 bus.
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
normal mode: ~100kbit/s
Definition: periph_cpu.h:116
port B
Definition: periph_cpu.h:37

Definition at line 228 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM2,
.rcc_mask = RCC_APB1ENR1_TIM2EN,
.chan = { { .pin = GPIO_PIN(PORT_A, 15), .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0},
{ .pin = GPIO_UNDEF, .cc_chan = 0} },
.af = GPIO_AF1,
.bus = APB1
}
}
APB1 bus.
use alternate function 1
port A
Definition: periph_cpu.h:36
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 162 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2,
}
}
port A
Definition: periph_cpu.h:36
APB2 bus.
use alternate function 5
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 202 of file periph_conf.h.

◆ spi_divtable

const uint8_t spi_divtable[2][5]
static
Initial value:
= {
{
7,
5,
3,
1,
0
},
{
7,
6,
4,
2,
1
}
}

Definition at line 185 of file periph_conf.h.

◆ timer_config

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM5,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR1_TIM5EN,
.bus = APB1,
.irqn = TIM5_IRQn
}
}
APB1 bus.

Definition at line 98 of file periph_conf.h.