Loading...
Searching...
No Matches
gpio_params.h
Go to the documentation of this file.
1/*
2 * Copyright (C) 2020 iosabi
3 *
4 * This file is subject to the terms and conditions of the GNU Lesser
5 * General Public License v2.1. See the file LICENSE in the top level
6 * directory for more details.
7 */
8
19#ifndef GPIO_PARAMS_H
20#define GPIO_PARAMS_H
21
22#include "board.h"
23#include "saul/periph.h"
24
25#ifdef __cplusplus
26extern "C" {
27#endif
28
33{
34 {
35 .name = "LED red",
36 .pin = LED_RED_PIN,
37 .mode = GPIO_OUT,
38 .flags = SAUL_GPIO_INIT_CLEAR,
39 },
40 {
41 .name = "LED green",
42 .pin = LED_GREEN_PIN,
43 .mode = GPIO_OUT,
44 .flags = SAUL_GPIO_INIT_CLEAR,
45 },
46 {
47 .name = "LED blue",
48 .pin = LED_BLUE_PIN,
49 .mode = GPIO_OUT,
50 .flags = SAUL_GPIO_INIT_CLEAR,
51 },
52 {
53 .name = "Button(SW1)",
54 .pin = BTN1_PIN,
55 .mode = BTN1_MODE,
56 .flags = SAUL_GPIO_INVERTED,
57 },
58 {
59 .name = "Button(SW2)",
60 .pin = BTN2_PIN,
61 .mode = BTN2_MODE,
62 .flags = SAUL_GPIO_INVERTED,
63 },
64};
65
66#ifdef __cplusplus
67}
68#endif
69
70#endif /* GPIO_PARAMS_H */
static const saul_gpio_params_t saul_gpio_params[]
LED configuration.
Definition gpio_params.h:33
#define BTN1_MODE
Button B mode.
Definition board.h:48
#define BTN1_PIN
Button B pin.
Definition board.h:47
#define BTN2_PIN
Button 2 pin
Definition board.h:58
#define BTN2_MODE
Button 2 mode
Definition board.h:59
@ GPIO_OUT
select GPIO MASK as output
Definition periph_cpu.h:165
#define LED_GREEN_PIN
LED1 is a green LED.
Definition board.h:74
#define LED_RED_PIN
LED0 is a red LED.
Definition board.h:71
Parameter definitions for mapping peripherals directly to SAUL.
@ SAUL_GPIO_INIT_CLEAR
set pin inactive after init
Definition periph.h:44
@ SAUL_GPIO_INVERTED
pin is used as inverted
Definition periph.h:43
Direct mapped GPIO configuration values.
Definition periph.h:51
const char * name
name of the device connected to this pin
Definition periph.h:52
Board specific definitions for the Zigduino board.