board.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2020 Inria
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once

 
#include "cpu.h"
#include "board_common.h"
 
#ifdef __cplusplus
extern "C" {
#endif

#define LED0_PIN               GPIO_PIN(1, 1)                  
#define LED0_MASK              (1 << 1)                        
#define LED0_ON                (NRF_P1->OUTSET = LED0_MASK)    
#define LED0_OFF               (NRF_P1->OUTCLR = LED0_MASK)    
#define LED0_TOGGLE            (NRF_P1->OUT   ^= LED0_MASK)    

#define BTN0_PIN               GPIO_PIN(1, 2)  
#define BTN0_MODE              GPIO_IN_PU      
 
#define BTN1_PIN               GPIO_PIN(1, 10) 
#define BTN1_MODE              GPIO_IN_PU      

#define APDS99XX_PARAM_DEV     I2C_DEV(1)       
#define APDS99XX_PARAM_INT_PIN GPIO_PIN(0, 9)   

#define BMX280_PARAM_I2C_DEV   I2C_DEV(1)   

#define LIS3MDL_PARAM_I2C      I2C_DEV(1)   
#define LIS3MDL_PARAM_ADDR     (0x1C)       

#define SHT3X_PARAM_I2C_DEV    I2C_DEV(1)          
#define SHT3X_PARAM_I2C_ADDR   (SHT3X_I2C_ADDR_1)  

#define SPKR_PIN               GPIO_PIN(1, 0)   

#define BACKLIGHT_PIN          GPIO_PIN(1, 5)                       
#define BACKLIGHT_MASK         (1 << 5)                             
#define BACKLIGHT_ON           (NRF_P1->OUTSET = BACKLIGHT_MASK)    
#define BACKLIGHT_OFF          (NRF_P1->OUTCLR = BACKLIGHT_MASK)    

#define ILI9341_PARAM_SPI       SPI_DEV(1)                      
#define ILI9341_PARAM_CS        GPIO_PIN(0, 12)                 
#define ILI9341_PARAM_DCX       GPIO_PIN(0, 13)                 
#define ILI9341_PARAM_RST       GPIO_PIN(1, 3)                  
#define ILI9341_PARAM_NUM_LINES (240U)                          
#define ILI9341_PARAM_RGB       (1)                             
#define ILI9341_PARAM_INVERTED  (1)                             
#define ILI9341_PARAM_ROTATION  (ILI9341_ROTATION_VERT)         
#define ILI9341_PARAM_OFFSET_X  (80)                            
 
#ifdef __cplusplus
}
#endif