Board specific definitions for the FRDM-KW41Z. More...

Detailed Description

Board specific definitions for the FRDM-KW41Z.

Author: Joakim Nohlgård joaki.nosp@m.m.no.nosp@m.hlgar.nosp@m.d@ei.nosp@m.stec..nosp@m.se

Definition in file board.h.

#include "cpu.h"
#include "board_common.h"
#include "periph_conf.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(PORT_B, 0)

#define	LED0_MASK (1 << 0)

#define	LED0_ON (GPIOB->PCOR = LED0_MASK)

#define	LED0_OFF (GPIOB->PSOR = LED0_MASK)

#define	LED0_TOGGLE (GPIOB->PTOR = LED0_MASK)

#define	LED1_PIN GPIO_PIN(PORT_C, 1)

#define	LED1_MASK (1 << 1)

#define	LED1_ON (GPIOC->PCOR = LED1_MASK)

#define	LED1_OFF (GPIOC->PSOR = LED1_MASK)

#define	LED1_TOGGLE (GPIOC->PTOR = LED1_MASK)

#define	LED2_PIN GPIO_PIN(PORT_A, 19)

#define	LED2_MASK (1 << 19)

#define	LED2_ON (GPIOA->PCOR = LED2_MASK)

#define	LED2_OFF (GPIOA->PSOR = LED2_MASK)

#define	LED2_TOGGLE (GPIOA->PTOR = LED2_MASK)

#define	LED3_PIN GPIO_PIN(PORT_A, 18)

#define	LED3_MASK (1 << 18)

#define	LED3_ON (GPIOA->PCOR = LED3_MASK)

#define	LED3_OFF (GPIOA->PSOR = LED3_MASK)

#define	LED3_TOGGLE (GPIOA->PTOR = LED3_MASK)

Button pin definitions
#define	BTN0_PIN GPIO_PIN(PORT_C, 4)

#define	BTN0_MODE GPIO_IN_PU

#define	BTN1_PIN GPIO_PIN(PORT_C, 5)

#define	BTN1_MODE GPIO_IN_PU

xtimer configuration
#define	XTIMER_DEV (TIMER_LPTMR_DEV(0))

#define	XTIMER_CHAN (0)

#define	XTIMER_WIDTH (16)

#define	XTIMER_BACKOFF (5)

#define	XTIMER_ISR_BACKOFF (5)

#define	XTIMER_HZ (32768ul)

ztimer configuration
#define	CONFIG_ZTIMER_USEC_TYPE ZTIMER_TYPE_PERIPH_TIMER

#define	CONFIG_ZTIMER_USEC_DEV (TIMER_PIT_DEV(0))

NOR flash hardware configuration
#define	FRDM_NOR_SPI_DEV SPI_DEV(0)

#define	FRDM_NOR_SPI_CLK SPI_CLK_5MHZ

#define	FRDM_NOR_SPI_CS SPI_HWCS(0)
	Flash CS pin.

FXOS8700CQ 3-axis accelerometer and magnetometer bus configuration
#define	FXOS8700_PARAM_I2C I2C_DEV(0)

#define	FXOS8700_PARAM_ADDR 0x1F

Macro Definition Documentation

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN_PU

Definition at line 65 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO_PIN(PORT_C, 4)

Definition at line 64 of file board.h.

◆ BTN1_MODE

#define BTN1_MODE GPIO_IN_PU

Definition at line 68 of file board.h.

◆ BTN1_PIN

#define BTN1_PIN GPIO_PIN(PORT_C, 5)

Definition at line 67 of file board.h.

◆ CONFIG_ZTIMER_USEC_DEV

#define CONFIG_ZTIMER_USEC_DEV (TIMER_PIT_DEV(0))

Definition at line 97 of file board.h.

◆ CONFIG_ZTIMER_USEC_TYPE

#define CONFIG_ZTIMER_USEC_TYPE ZTIMER_TYPE_PERIPH_TIMER

Definition at line 96 of file board.h.

◆ FRDM_NOR_SPI_CLK

#define FRDM_NOR_SPI_CLK SPI_CLK_5MHZ

Definition at line 105 of file board.h.

◆ FRDM_NOR_SPI_CS

#define FRDM_NOR_SPI_CS SPI_HWCS(0)

Flash CS pin.

Definition at line 106 of file board.h.

◆ FRDM_NOR_SPI_DEV

#define FRDM_NOR_SPI_DEV SPI_DEV(0)

Definition at line 104 of file board.h.

◆ FXOS8700_PARAM_ADDR

#define FXOS8700_PARAM_ADDR 0x1F

Definition at line 114 of file board.h.

◆ FXOS8700_PARAM_I2C

#define FXOS8700_PARAM_I2C I2C_DEV(0)

Definition at line 113 of file board.h.

◆ LED0_MASK

#define LED0_MASK (1 << 0)

Definition at line 36 of file board.h.

◆ LED0_OFF

#define LED0_OFF (GPIOB->PSOR = LED0_MASK)

Definition at line 38 of file board.h.

◆ LED0_ON

#define LED0_ON (GPIOB->PCOR = LED0_MASK)

Definition at line 37 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(PORT_B, 0)

Definition at line 35 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE (GPIOB->PTOR = LED0_MASK)

Definition at line 39 of file board.h.

◆ LED1_MASK

#define LED1_MASK (1 << 1)

Definition at line 41 of file board.h.

◆ LED1_OFF

#define LED1_OFF (GPIOC->PSOR = LED1_MASK)

Definition at line 43 of file board.h.

◆ LED1_ON

#define LED1_ON (GPIOC->PCOR = LED1_MASK)

Definition at line 42 of file board.h.

◆ LED1_PIN

#define LED1_PIN GPIO_PIN(PORT_C, 1)

Definition at line 40 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE (GPIOC->PTOR = LED1_MASK)

Definition at line 44 of file board.h.

◆ LED2_MASK

#define LED2_MASK (1 << 19)

Definition at line 46 of file board.h.

◆ LED2_OFF

#define LED2_OFF (GPIOA->PSOR = LED2_MASK)

Definition at line 48 of file board.h.

◆ LED2_ON

#define LED2_ON (GPIOA->PCOR = LED2_MASK)

Definition at line 47 of file board.h.

◆ LED2_PIN

#define LED2_PIN GPIO_PIN(PORT_A, 19)

Definition at line 45 of file board.h.

◆ LED2_TOGGLE

#define LED2_TOGGLE (GPIOA->PTOR = LED2_MASK)

Definition at line 49 of file board.h.

◆ LED3_MASK

#define LED3_MASK (1 << 18)

Definition at line 51 of file board.h.

◆ LED3_OFF

#define LED3_OFF (GPIOA->PSOR = LED3_MASK)

Definition at line 53 of file board.h.

◆ LED3_ON

#define LED3_ON (GPIOA->PCOR = LED3_MASK)

Definition at line 52 of file board.h.

◆ LED3_PIN

#define LED3_PIN GPIO_PIN(PORT_A, 18)

Definition at line 50 of file board.h.

◆ LED3_TOGGLE

#define LED3_TOGGLE (GPIOA->PTOR = LED3_MASK)

Definition at line 54 of file board.h.

◆ XTIMER_BACKOFF

#define XTIMER_BACKOFF (5)

Definition at line 86 of file board.h.

◆ XTIMER_CHAN

#define XTIMER_CHAN (0)

Definition at line 83 of file board.h.

◆ XTIMER_DEV

#define XTIMER_DEV (TIMER_LPTMR_DEV(0))

Definition at line 82 of file board.h.

◆ XTIMER_HZ

#define XTIMER_HZ (32768ul)

Definition at line 88 of file board.h.

◆ XTIMER_ISR_BACKOFF

#define XTIMER_ISR_BACKOFF (5)

Definition at line 87 of file board.h.

◆ XTIMER_WIDTH

#define XTIMER_WIDTH (16)

Definition at line 85 of file board.h.