Board definitions for ESP32-S3 WT32-SC01 Plus boards. More...

Detailed Description

Board definitions for ESP32-S3 WT32-SC01 Plus boards.

The board definitions in this file are for the Espressif ESP32-S3 WT32-SC01 Plus.

Any modifications required for specific applications can be overridden by application-specific board configuration.

Author: Gunar Schorcht gunar.nosp@m.@sch.nosp@m.orcht.nosp@m..net

Definition in file board.h.

#include <stdint.h>
#include "board_common.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Button pin definitions
#define	BTN0_PIN GPIO0
	Default button GPIO pin definition.

#define	BTN0_MODE GPIO_IN_PU
	Default button GPIO mode definition.

#define	BTN0_INT_FLANK GPIO_FALLING
	Default interrupt flank definition for the button GPIO.

#define	BUTTON0_PIN BTN0_PIN
	Definition for compatibility with previous versions.

LCD display configuration
ESP32-S3 WT32-SC01 Plus uses a 3.5" LCD 480 x 320 pixel display with an ST7796UI as driver chip and MCU8080 8-bit parallel interface. This configuration cannot be changed.
#define	LCD_SCREEN_WIDTH 480
	LCD width.

#define	LCD_SCREEN_HEIGHT 320
	LCD height.

Touch panel configuration
#define	FT5X06_PARAM_I2C_DEV I2C_DEV(0)
	I2C device.

#define	FT5X06_PARAM_INT_PIN GPIO7
	Interrupt pin.

#define	FT5X06_PARAM_RST_PIN GPIO4
	Reset pin.

#define	FT5X06_PARAM_XMAX LCD_SCREEN_WIDTH
	Max width.

#define	FT5X06_PARAM_YMAX LCD_SCREEN_HEIGHT
	Max height.

#define	FT5X06_PARAM_TYPE FT5X06_TYPE_FT6X36
	Device type.

#define	FT5X06_PARAM_XYCONV (FT5X06_SWAP_XY \| FT5X06_MIRROR_Y)
	Swap XY, then mirror Y.

SD-Card interface configuration
SD-Card interface uses SPI_DEV(1) on this board.
#define	SDCARD_SPI_PARAM_SPI SPI_DEV(0)

#define	SDCARD_SPI_PARAM_CS SPI0_CS0

#define	SDCARD_SPI_PARAM_CLK SPI0_SCK

#define	SDCARD_SPI_PARAM_MOSI SPI0_MOSI

#define	SDCARD_SPI_PARAM_MISO SPI0_MISO

#define	SDCARD_SPI_PARAM_POWER GPIO_UNDEF

Macro Definition Documentation

◆ BTN0_INT_FLANK

#define BTN0_INT_FLANK GPIO_FALLING

Default interrupt flank definition for the button GPIO.

Definition at line 53 of file board.h.

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN_PU

Default button GPIO mode definition.

Definition at line 47 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO0

Default button GPIO pin definition.

ESP32-S3 WT32-SC01 Plus boards have a BOOT button connected to GPIO0, which can be used as button during normal operation. Since the GPIO0 pin is pulled up, the button signal is inverted, i.e., pressing the button will give a low signal.

Definition at line 42 of file board.h.

◆ BUTTON0_PIN

#define BUTTON0_PIN BTN0_PIN

Definition for compatibility with previous versions.

Definition at line 59 of file board.h.

◆ FT5X06_PARAM_I2C_DEV

#define FT5X06_PARAM_I2C_DEV I2C_DEV(0)

I2C device.

Definition at line 120 of file board.h.

◆ FT5X06_PARAM_INT_PIN

#define FT5X06_PARAM_INT_PIN GPIO7

Interrupt pin.

Definition at line 121 of file board.h.

◆ FT5X06_PARAM_RST_PIN

#define FT5X06_PARAM_RST_PIN GPIO4

Reset pin.

Definition at line 122 of file board.h.

◆ FT5X06_PARAM_TYPE

#define FT5X06_PARAM_TYPE FT5X06_TYPE_FT6X36

Device type.

Definition at line 125 of file board.h.

◆ FT5X06_PARAM_XMAX

#define FT5X06_PARAM_XMAX LCD_SCREEN_WIDTH

Max width.

Definition at line 123 of file board.h.

◆ FT5X06_PARAM_XYCONV

#define FT5X06_PARAM_XYCONV (FT5X06_SWAP_XY | FT5X06_MIRROR_Y)

Swap XY, then mirror Y.

Definition at line 126 of file board.h.

◆ FT5X06_PARAM_YMAX

#define FT5X06_PARAM_YMAX LCD_SCREEN_HEIGHT

Max height.

Definition at line 124 of file board.h.

◆ LCD_SCREEN_HEIGHT

#define LCD_SCREEN_HEIGHT 320

LCD height.

Definition at line 73 of file board.h.

◆ LCD_SCREEN_WIDTH

#define LCD_SCREEN_WIDTH 480

LCD width.

Definition at line 72 of file board.h.

◆ SDCARD_SPI_PARAM_CLK

#define SDCARD_SPI_PARAM_CLK SPI0_SCK

Definition at line 137 of file board.h.

◆ SDCARD_SPI_PARAM_CS

#define SDCARD_SPI_PARAM_CS SPI0_CS0

Definition at line 136 of file board.h.

◆ SDCARD_SPI_PARAM_MISO

#define SDCARD_SPI_PARAM_MISO SPI0_MISO

Definition at line 139 of file board.h.

◆ SDCARD_SPI_PARAM_MOSI

#define SDCARD_SPI_PARAM_MOSI SPI0_MOSI

Definition at line 138 of file board.h.

◆ SDCARD_SPI_PARAM_POWER

#define SDCARD_SPI_PARAM_POWER GPIO_UNDEF

Definition at line 140 of file board.h.

◆ SDCARD_SPI_PARAM_SPI

#define SDCARD_SPI_PARAM_SPI SPI_DEV(0)

Definition at line 135 of file board.h.