Board specific definitions for the STK3700 starter kit. More...

Detailed Description

Board specific definitions for the STK3700 starter kit.

Author: Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de; Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"
#include "periph/adc.h"
#include "periph/gpio.h"
#include "periph/spi.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Xtimer configuration
The timer runs at 250 kHz to increase accuracy, or at 32.768 kHz if LETIMER is used.
#define	XTIMER_DEV (TIMER_DEV(0))

#define	XTIMER_HZ (250000UL)

#define	XTIMER_WIDTH (16)

#define	XTIMER_CHAN (0)

Board controller configuration
Define the GPIO pin to enable the BC, to allow serial communication via the USB port.
#define	BC_PIN GPIO_PIN(PF, 7)

Push button pin definitions
#define	PB0_PIN GPIO_PIN(PB, 9)

#define	PB1_PIN GPIO_PIN(PB, 10)

LED pin definitions
#define	LED0_PIN GPIO_PIN(PE, 2)

#define	LED1_PIN GPIO_PIN(PE, 3)

Macros for controlling the on-board LEDs
#define	LED0_ON gpio_set(LED0_PIN)

#define	LED0_OFF gpio_clear(LED0_PIN)

#define	LED0_TOGGLE gpio_toggle(LED0_PIN)

#define	LED1_ON gpio_set(LED1_PIN)

#define	LED1_OFF gpio_clear(LED1_PIN)

#define	LED1_TOGGLE gpio_toggle(LED1_PIN)

Core temperature sensor configuration
Connection to the on-chip temperature sensor.
#define	CORETEMP_ADC ADC_LINE(0)

Macro Definition Documentation

◆ BC_PIN

#define BC_PIN GPIO_PIN(PF, 7)

Definition at line 59 of file board.h.

◆ CORETEMP_ADC

#define CORETEMP_ADC ADC_LINE(0)

Definition at line 96 of file board.h.

◆ LED0_OFF

#define LED0_OFF gpio_clear(LED0_PIN)

Definition at line 83 of file board.h.

◆ LED0_ON

#define LED0_ON gpio_set(LED0_PIN)

Definition at line 82 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(PE, 2)

Definition at line 74 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE gpio_toggle(LED0_PIN)

Definition at line 84 of file board.h.

◆ LED1_OFF

#define LED1_OFF gpio_clear(LED1_PIN)

Definition at line 86 of file board.h.

◆ LED1_ON

#define LED1_ON gpio_set(LED1_PIN)

Definition at line 85 of file board.h.

◆ LED1_PIN

#define LED1_PIN GPIO_PIN(PE, 3)

Definition at line 75 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE gpio_toggle(LED1_PIN)

Definition at line 87 of file board.h.

◆ PB0_PIN

#define PB0_PIN GPIO_PIN(PB, 9)

Definition at line 66 of file board.h.

◆ PB1_PIN

#define PB1_PIN GPIO_PIN(PB, 10)

Definition at line 67 of file board.h.

◆ XTIMER_CHAN

#define XTIMER_CHAN (0)

Definition at line 49 of file board.h.

◆ XTIMER_DEV

#define XTIMER_DEV (TIMER_DEV(0))

Definition at line 45 of file board.h.

◆ XTIMER_HZ

#define XTIMER_HZ (250000UL)

Definition at line 46 of file board.h.

◆ XTIMER_WIDTH

#define XTIMER_WIDTH (16)

Definition at line 47 of file board.h.