The friendly Operating System for the Internet of Things
boards/f4vi1/include/periph_conf.h File Reference
#include "periph_cpu.h"
+ Include dependency graph for boards/f4vi1/include/periph_conf.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

Clock system configuration
#define CLOCK_HSE   (16000000U) /* external oscillator */
 
#define CLOCK_CORECLOCK   (168000000U) /* desired core clock frequency */
 
#define CLOCK_PLL_M   (CLOCK_HSE / 1000000)
 
#define CLOCK_PLL_N   ((CLOCK_CORECLOCK / 1000000) * 2)
 
#define CLOCK_PLL_P   (2U)
 
#define CLOCK_PLL_Q   (CLOCK_PLL_N / 48)
 
#define CLOCK_AHB_DIV   RCC_CFGR_HPRE_DIV1
 
#define CLOCK_APB2_DIV   RCC_CFGR_PPRE2_DIV2
 
#define CLOCK_APB1_DIV   RCC_CFGR_PPRE1_DIV4
 
#define CLOCK_FLASH_LATENCY   FLASH_ACR_LATENCY_5WS
 
#define CLOCK_AHB   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_APB2   (CLOCK_CORECLOCK / 2)
 
#define CLOCK_APB1   (CLOCK_CORECLOCK / 4)
 
ADC configuration
#define ADC_NUMOF   (0)
 
DAC configuration
#define DAC_NUMOF   (0)
 

Timer configuration

#define TIMER_0_ISR   isr_tim2
 
#define TIMER_1_ISR   isr_tim5
 
#define TIMER_NUMOF   (sizeof(timer_config) / sizeof(timer_config[0]))
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart6)
 
#define UART_0_DMA_ISR   (isr_dma2_stream6)
 
#define UART_NUMOF   (sizeof(uart_config) / sizeof(uart_config[0]))
 
static const uart_conf_t uart_config []
 

Variable Documentation

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM2,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
},
{
.dev = TIM5,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM5EN,
.bus = APB1,
.irqn = TIM5_IRQn
}
}

Definition at line 57 of file boards/f4vi1/include/periph_conf.h.

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = USART6,
.rcc_mask = RCC_APB2ENR_USART6EN,
.rx_pin = GPIO_PIN(PORT_C, 7),
.tx_pin = GPIO_PIN(PORT_C, 6),
.rx_af = GPIO_AF8,
.tx_af = GPIO_AF8,
.bus = APB2,
.irqn = USART6_IRQn
}
}
use alternate function 8
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.

Definition at line 84 of file boards/f4vi1/include/periph_conf.h.