Interrupt service routine declarations NXP QN908x MCUs. More...
Detailed Description
Interrupt service routine declarations NXP QN908x MCUs.
Definition in file vectors_qn908x.h.
Include dependency graph for vectors_qn908x.h:Go to the source code of this file.
Functions | |
| void | dummy_handler (void) |
| Dummy handler. | |
| void | isr_ext_gpio_wakeup (void) |
| Ext GPIO wakeup. | |
| void | isr_osc (void) |
| BLE wakeup. | |
| void | isr_acmp0 (void) |
| Analog comparator0. | |
| void | isr_acmp1 (void) |
| Analog comparator1. | |
| void | isr_rtc_sec (void) |
| RTC second. | |
| void | isr_rtc_fr (void) |
| RTC free running. | |
| void | isr_cs_wakeup (void) |
| Capacitive sense wakeup. | |
| void | isr_cs (void) |
| Capacitive sense. | |
| void | isr_gpioa (void) |
| GPIO group A. | |
| void | isr_gpiob (void) |
| GPIO group B. | |
| void | isr_dma0 (void) |
| DMA controller. | |
| void | isr_pin_int0 (void) |
| pin or pattern match engine slice 0 | |
| void | isr_pin_int1 (void) |
| pin or pattern match engine slice 1 | |
| void | isr_pin_int2 (void) |
| pin or pattern match engine slice 2 | |
| void | isr_pin_int3 (void) |
| pin or pattern match engine slice 3 | |
| void | isr_osc_int_low (void) |
| Inverse of OSC. | |
| void | isr_usb0 (void) |
| USB device. | |
| void | isr_flexcomm0 (void) |
| Flexcomm Interface 0 (USART) | |
| void | isr_flexcomm1 (void) |
| Flexcomm Interface 1 (USART, I2C) | |
| void | isr_flexcomm2 (void) |
| Flexcomm Interface 2 (SPI, I2C) | |
| void | isr_flexcomm3 (void) |
| Flexcomm Interface 3 (SPI) | |
| void | isr_ble (void) |
| BLE interrupts. | |
| void | isr_fsp (void) |
| FSP. | |
| void | isr_qdec0 (void) |
| QDEC0. | |
| void | isr_qdec1 (void) |
| QDEC1. | |
| void | isr_ctimer0 (void) |
| Standard counter/timer CTIMER0. | |
| void | isr_ctimer1 (void) |
| Standard counter/timer CTIMER1. | |
| void | isr_ctimer2 (void) |
| Standard counter/timer CTIMER2. | |
| void | isr_ctimer3 (void) |
| Standard counter/timer CTIMER3. | |
| void | isr_wdt (void) |
| Watch dog timer. | |
| void | isr_adc (void) |
| ADC. | |
| void | isr_dac (void) |
| DAC. | |
| void | isr_xtal_ready (void) |
| High frequency crystal ready. | |
| void | isr_flash (void) |
| Flash. | |
| void | isr_spifi0 (void) |
| SPI flash interface. | |
| void | isr_sct0 (void) |
| SCTimer/PWM. | |
| void | isr_rng (void) |
| Random number generator. | |
| void | isr_calib (void) |
| Calibration. | |
| void | isr_ble_tx (void) |
| ble tx flag | |
| void | isr_ble_rx (void) |
| ble rx flag | |
| void | isr_ble_freq_hop (void) |
| ble frequency hop | |
| void | isr_bod (void) |
| Brown out detect. | |
| #define | QN908X_ISP_SMART_EN 0x80 |
| SMART write enabled to ISP. | |
| #define | QN908X_ISP_USB_DIS 0x20 |
| SMART USB disabled to ISP. | |
| #define | QN908X_ISP_UART_DIS 0x08 |
| SMART UART disabled to ISP. | |
| #define | QN908X_ISP_SPI_DIS 0x02 |
| SMART SPI disabled to ISP. | |
| const uint32_t | isp_configuration |
| In-System Programming configuration field. | |
Macro Definition Documentation
◆ QN908X_ISP_SMART_EN
| #define QN908X_ISP_SMART_EN 0x80 |
SMART write enabled to ISP.
Definition at line 95 of file vectors_qn908x.h.
◆ QN908X_ISP_SPI_DIS
| #define QN908X_ISP_SPI_DIS 0x02 |
SMART SPI disabled to ISP.
Definition at line 110 of file vectors_qn908x.h.
◆ QN908X_ISP_UART_DIS
| #define QN908X_ISP_UART_DIS 0x08 |
SMART UART disabled to ISP.
Definition at line 105 of file vectors_qn908x.h.
◆ QN908X_ISP_USB_DIS
| #define QN908X_ISP_USB_DIS 0x20 |
SMART USB disabled to ISP.
Definition at line 100 of file vectors_qn908x.h.
Variable Documentation
◆ isp_configuration
|
extern |
In-System Programming configuration field.
After the interrupt vectors, at address 0x110 there's a ISP (In-System Programming) configuration field. Define isp_configuration to any | combination of the following QN908X_ISP_* values to change the ISP allowed options.
