#[repr(C)]pub struct NRF_UARTE_Type {Show 43 fields
pub TASKS_STARTRX: u32,
pub TASKS_STOPRX: u32,
pub TASKS_STARTTX: u32,
pub TASKS_STOPTX: u32,
pub RESERVED: [u32; 7],
pub TASKS_FLUSHRX: u32,
pub RESERVED1: [u32; 52],
pub EVENTS_CTS: u32,
pub EVENTS_NCTS: u32,
pub EVENTS_RXDRDY: u32,
pub RESERVED2: u32,
pub EVENTS_ENDRX: u32,
pub RESERVED3: [u32; 2],
pub EVENTS_TXDRDY: u32,
pub EVENTS_ENDTX: u32,
pub EVENTS_ERROR: u32,
pub RESERVED4: [u32; 7],
pub EVENTS_RXTO: u32,
pub RESERVED5: u32,
pub EVENTS_RXSTARTED: u32,
pub EVENTS_TXSTARTED: u32,
pub RESERVED6: u32,
pub EVENTS_TXSTOPPED: u32,
pub RESERVED7: [u32; 41],
pub SHORTS: u32,
pub RESERVED8: [u32; 63],
pub INTEN: u32,
pub INTENSET: u32,
pub INTENCLR: u32,
pub RESERVED9: [u32; 93],
pub ERRORSRC: u32,
pub RESERVED10: [u32; 31],
pub ENABLE: u32,
pub RESERVED11: u32,
pub PSEL: UARTE_PSEL_Type,
pub RESERVED12: [u32; 3],
pub BAUDRATE: u32,
pub RESERVED13: [u32; 3],
pub RXD: UARTE_RXD_Type,
pub RESERVED14: u32,
pub TXD: UARTE_TXD_Type,
pub RESERVED15: [u32; 7],
pub CONFIG: u32,
}
Expand description
@brief UART with EasyDMA 0 (UARTE0)
Fields§
§TASKS_STARTRX: u32
< (@ 0x00000000) Start UART receiver
TASKS_STOPRX: u32
< (@ 0x00000004) Stop UART receiver
TASKS_STARTTX: u32
< (@ 0x00000008) Start UART transmitter
TASKS_STOPTX: u32
< (@ 0x0000000C) Stop UART transmitter
RESERVED: [u32; 7]
§TASKS_FLUSHRX: u32
< (@ 0x0000002C) Flush RX FIFO into RX buffer
RESERVED1: [u32; 52]
§EVENTS_CTS: u32
< (@ 0x00000100) CTS is activated (set low). Clear To Send.
EVENTS_NCTS: u32
< (@ 0x00000104) CTS is deactivated (set high). Not Clear To Send.
EVENTS_RXDRDY: u32
< (@ 0x00000108) Data received in RXD (but potentially not yet transferred to Data RAM)
RESERVED2: u32
§EVENTS_ENDRX: u32
< (@ 0x00000110) Receive buffer is filled up
RESERVED3: [u32; 2]
§EVENTS_TXDRDY: u32
< (@ 0x0000011C) Data sent from TXD
EVENTS_ENDTX: u32
< (@ 0x00000120) Last TX byte transmitted
EVENTS_ERROR: u32
< (@ 0x00000124) Error detected
RESERVED4: [u32; 7]
§EVENTS_RXTO: u32
< (@ 0x00000144) Receiver timeout
RESERVED5: u32
§EVENTS_RXSTARTED: u32
< (@ 0x0000014C) UART receiver has started
EVENTS_TXSTARTED: u32
< (@ 0x00000150) UART transmitter has started
RESERVED6: u32
§EVENTS_TXSTOPPED: u32
< (@ 0x00000158) Transmitter stopped
RESERVED7: [u32; 41]
§SHORTS: u32
< (@ 0x00000200) Shortcuts between local events and tasks
RESERVED8: [u32; 63]
§INTEN: u32
< (@ 0x00000300) Enable or disable interrupt
INTENSET: u32
< (@ 0x00000304) Enable interrupt
INTENCLR: u32
< (@ 0x00000308) Disable interrupt
RESERVED9: [u32; 93]
§ERRORSRC: u32
< (@ 0x00000480) Error source Note : this register is read / write one to clear.
RESERVED10: [u32; 31]
§ENABLE: u32
< (@ 0x00000500) Enable UART
RESERVED11: u32
§PSEL: UARTE_PSEL_Type
< (@ 0x00000508) Unspecified
RESERVED12: [u32; 3]
§BAUDRATE: u32
< (@ 0x00000524) Baud rate. Accuracy depends on the HFCLK source selected.
RESERVED13: [u32; 3]
§RXD: UARTE_RXD_Type
< (@ 0x00000534) RXD EasyDMA channel
RESERVED14: u32
§TXD: UARTE_TXD_Type
< (@ 0x00000544) TXD EasyDMA channel
RESERVED15: [u32; 7]
§CONFIG: u32
< (@ 0x0000056C) Configuration of parity and hardware flow control
Trait Implementations§
source§impl Clone for NRF_UARTE_Type
impl Clone for NRF_UARTE_Type
source§fn clone(&self) -> NRF_UARTE_Type
fn clone(&self) -> NRF_UARTE_Type
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for NRF_UARTE_Type
impl Debug for NRF_UARTE_Type
source§impl Default for NRF_UARTE_Type
impl Default for NRF_UARTE_Type
impl Copy for NRF_UARTE_Type
Auto Trait Implementations§
impl Freeze for NRF_UARTE_Type
impl RefUnwindSafe for NRF_UARTE_Type
impl Send for NRF_UARTE_Type
impl Sync for NRF_UARTE_Type
impl Unpin for NRF_UARTE_Type
impl UnwindSafe for NRF_UARTE_Type
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)Layout§
Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...)
attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.
Size: 1392 bytes