riot_sys::bindgen

Struct NRF_UARTE_Type

Source
#[repr(C)]
pub struct NRF_UARTE_Type {
Show 43 fields pub TASKS_STARTRX: u32, pub TASKS_STOPRX: u32, pub TASKS_STARTTX: u32, pub TASKS_STOPTX: u32, pub RESERVED: [u32; 7], pub TASKS_FLUSHRX: u32, pub RESERVED1: [u32; 52], pub EVENTS_CTS: u32, pub EVENTS_NCTS: u32, pub EVENTS_RXDRDY: u32, pub RESERVED2: u32, pub EVENTS_ENDRX: u32, pub RESERVED3: [u32; 2], pub EVENTS_TXDRDY: u32, pub EVENTS_ENDTX: u32, pub EVENTS_ERROR: u32, pub RESERVED4: [u32; 7], pub EVENTS_RXTO: u32, pub RESERVED5: u32, pub EVENTS_RXSTARTED: u32, pub EVENTS_TXSTARTED: u32, pub RESERVED6: u32, pub EVENTS_TXSTOPPED: u32, pub RESERVED7: [u32; 41], pub SHORTS: u32, pub RESERVED8: [u32; 63], pub INTEN: u32, pub INTENSET: u32, pub INTENCLR: u32, pub RESERVED9: [u32; 93], pub ERRORSRC: u32, pub RESERVED10: [u32; 31], pub ENABLE: u32, pub RESERVED11: u32, pub PSEL: UARTE_PSEL_Type, pub RESERVED12: [u32; 3], pub BAUDRATE: u32, pub RESERVED13: [u32; 3], pub RXD: UARTE_RXD_Type, pub RESERVED14: u32, pub TXD: UARTE_TXD_Type, pub RESERVED15: [u32; 7], pub CONFIG: u32,
}
Expand description

@brief UART with EasyDMA 0 (UARTE0)

Fields§

§TASKS_STARTRX: u32

< (@ 0x00000000) Start UART receiver

§TASKS_STOPRX: u32

< (@ 0x00000004) Stop UART receiver

§TASKS_STARTTX: u32

< (@ 0x00000008) Start UART transmitter

§TASKS_STOPTX: u32

< (@ 0x0000000C) Stop UART transmitter

§RESERVED: [u32; 7]§TASKS_FLUSHRX: u32

< (@ 0x0000002C) Flush RX FIFO into RX buffer

§RESERVED1: [u32; 52]§EVENTS_CTS: u32

< (@ 0x00000100) CTS is activated (set low). Clear To Send.

§EVENTS_NCTS: u32

< (@ 0x00000104) CTS is deactivated (set high). Not Clear To Send.

§EVENTS_RXDRDY: u32

< (@ 0x00000108) Data received in RXD (but potentially not yet transferred to Data RAM)

§RESERVED2: u32§EVENTS_ENDRX: u32

< (@ 0x00000110) Receive buffer is filled up

§RESERVED3: [u32; 2]§EVENTS_TXDRDY: u32

< (@ 0x0000011C) Data sent from TXD

§EVENTS_ENDTX: u32

< (@ 0x00000120) Last TX byte transmitted

§EVENTS_ERROR: u32

< (@ 0x00000124) Error detected

§RESERVED4: [u32; 7]§EVENTS_RXTO: u32

< (@ 0x00000144) Receiver timeout

§RESERVED5: u32§EVENTS_RXSTARTED: u32

< (@ 0x0000014C) UART receiver has started

§EVENTS_TXSTARTED: u32

< (@ 0x00000150) UART transmitter has started

§RESERVED6: u32§EVENTS_TXSTOPPED: u32

< (@ 0x00000158) Transmitter stopped

§RESERVED7: [u32; 41]§SHORTS: u32

< (@ 0x00000200) Shortcuts between local events and tasks

§RESERVED8: [u32; 63]§INTEN: u32

< (@ 0x00000300) Enable or disable interrupt

§INTENSET: u32

< (@ 0x00000304) Enable interrupt

§INTENCLR: u32

< (@ 0x00000308) Disable interrupt

§RESERVED9: [u32; 93]§ERRORSRC: u32

< (@ 0x00000480) Error source Note : this register is read / write one to clear.

§RESERVED10: [u32; 31]§ENABLE: u32

< (@ 0x00000500) Enable UART

§RESERVED11: u32§PSEL: UARTE_PSEL_Type

< (@ 0x00000508) Unspecified

§RESERVED12: [u32; 3]§BAUDRATE: u32

< (@ 0x00000524) Baud rate. Accuracy depends on the HFCLK source selected.

§RESERVED13: [u32; 3]§RXD: UARTE_RXD_Type

< (@ 0x00000534) RXD EasyDMA channel

§RESERVED14: u32§TXD: UARTE_TXD_Type

< (@ 0x00000544) TXD EasyDMA channel

§RESERVED15: [u32; 7]§CONFIG: u32

< (@ 0x0000056C) Configuration of parity and hardware flow control

Trait Implementations§

Source§

impl Clone for NRF_UARTE_Type

Source§

fn clone(&self) -> NRF_UARTE_Type

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for NRF_UARTE_Type

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for NRF_UARTE_Type

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl Copy for NRF_UARTE_Type

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 1392 bytes