Board specific definitions for the OpenMote-B board. More...

Detailed Description

Board specific definitions for the OpenMote-B board.

Author: Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de; Kevin Weiss kevin.nosp@m..wei.nosp@m.ss@ha.nosp@m.w-ha.nosp@m.mburg.nosp@m..de

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"
#include "cc2538_eui_primary.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(2, 4)

#define	LED1_PIN GPIO_PIN(2, 7)

#define	LED2_PIN GPIO_PIN(2, 6)

#define	LED3_PIN GPIO_PIN(2, 5)

#define	BTN0_PIN GPIO_PIN(3, 5)

#define	BTN0_MODE GPIO_IN

#define	RF24_SWITCH_CC2538_PIN GPIO_PIN(3, 4)
	PD4 – CC2538.

#define	RF24_SWITCH_AT86RF215_PIN GPIO_PIN(3, 3)
	PD3 – AT86RF215.

#define	LED_PORT GPIO_C

#define	LED0_MASK (1 << 4)

#define	LED1_MASK (1 << 7)

#define	LED2_MASK (1 << 6)

#define	LED3_MASK (1 << 5)

#define	RF_SWITCH_PORT GPIO_D

#define	RF24_SWITCH_CC2538_MASK (1 << 4)

#define	RF24_SWITCH_AT86RF215_MASK (1 << 3)

#define	LED0_ON (LED_PORT->DATA &= ~LED0_MASK)

#define	LED0_OFF (LED_PORT->DATA \|= LED0_MASK)

#define	LED0_TOGGLE (LED_PORT->DATA ^= LED0_MASK)

#define	LED1_ON (LED_PORT->DATA &= ~LED1_MASK)

#define	LED1_OFF (LED_PORT->DATA \|= LED1_MASK)

#define	LED1_TOGGLE (LED_PORT->DATA ^= LED1_MASK)

#define	LED2_ON (LED_PORT->DATA &= ~LED2_MASK)

#define	LED2_OFF (LED_PORT->DATA \|= LED2_MASK)

#define	LED2_TOGGLE (LED_PORT->DATA ^= LED2_MASK)

#define	LED3_ON (LED_PORT->DATA &= ~LED3_MASK)

#define	LED3_OFF (LED_PORT->DATA \|= LED3_MASK)

#define	LED3_TOGGLE (LED_PORT->DATA ^= LED3_MASK)

#define	RF24_SWITCH_CC2538_ON (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_CC2538_MASK)

#define	RF24_SWITCH_CC2538_OFF (RF_SWITCH_PORT->DATA \|= RF24_SWITCH_CC2538_MASK)

#define	RF24_SWITCH_CC2538_TOGGLE (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_CC2538_MASK)

#define	RF24_SWITCH_AT86RF215_ON (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_AT86RF215_MASK)

#define	RF24_SWITCH_AT86RF215_OFF (RF_SWITCH_PORT->DATA \|= RF24_SWITCH_AT86RF215_MASK)

#define	RF24_SWITCH_AT86RF215_TOGGLE (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_AT86RF215_MASK)

RF CORE observable signals settings
#define	CONFIG_CC2538_RF_OBS_SIG_0_PCX 5 /* PC5 */

#define	CONFIG_CC2538_RF_OBS_SIG_1_PCX 6 /* PC6 */

#define	CONFIG_CC2538_RF_OBS_SIG_2_PCX 7 /* PC7 */

OpenWSN leds configuration
Note This configuration mimics the one done in OpenWSN-fw for the same platform
#define	OPENWSN_LEDPIN_ERROR LED0_PIN

#define	OPENWSN_LEDPIN_SYNC LED1_PIN

#define	OPENWSN_LEDPIN_RADIO LED3_PIN

#define	OPENWSN_LEDPIN_DEBUG LED2_PIN

OpenWSN debugpins configuration
Note This configuration mimics the one done in OpenWSN-fw for the same platform
#define	OPENWSN_DEBUGPIN_FRAME GPIO_PIN(0, 7) /* A7 */

#define	OPENWSN_DEBUGPIN_ISR GPIO_PIN(2, 3) /* C3 */

#define	OPENWSN_DEBUGPIN_SLOT GPIO_PIN(1, 3) /* B3 */

#define	OPENWSN_DEBUGPIN_FSM GPIO_PIN(1, 2) /* B2 */

#define	OPENWSN_DEBUGPIN_TASK GPIO_PIN(1, 1) /* B1 */

#define	OPENWSN_DEBUGPIN_RADIO GPIO_PIN(1, 0) /* B0 */

AT86RF215 configuration
#define	AT86RF215_PARAM_SPI SPI_DEV(0)

#define	AT86RF215_PARAM_CS GPIO_PIN(0, 3) /* A3 */

#define	AT86RF215_PARAM_INT GPIO_PIN(3, 0) /* D0 */

#define	AT86RF215_PARAM_RESET GPIO_PIN(3, 1) /* D1 */

#define	CONFIG_AT86RF215_RESET_PULSE_WIDTH_US (50000u)
	board requires unusually long reset

xtimer configuration
#define	XTIMER_WIDTH (16)

#define	XTIMER_BACKOFF (50)

#define	XTIMER_ISR_BACKOFF (40)

Flash Customer Configuration Area (CCA) parameters
#define	UPDATE_CCA (1)

#define	CCA_BACKDOOR_ENABLE (1)

#define	CCA_BACKDOOR_PORT_A_PIN (6)
	BSL_BOOT Pin.

#define	CCA_BACKDOOR_ACTIVE_LEVEL (0)
	Active low.

#define	BOOT_PIN GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN)
	BSL_BOOT Pin.

Macro Definition Documentation

◆ AT86RF215_PARAM_CS

#define AT86RF215_PARAM_CS GPIO_PIN(0, 3) /* A3 */

Definition at line 122 of file board.h.

◆ AT86RF215_PARAM_INT

#define AT86RF215_PARAM_INT GPIO_PIN(3, 0) /* D0 */

Definition at line 123 of file board.h.

◆ AT86RF215_PARAM_RESET

#define AT86RF215_PARAM_RESET GPIO_PIN(3, 1) /* D1 */

Definition at line 124 of file board.h.

◆ AT86RF215_PARAM_SPI

#define AT86RF215_PARAM_SPI SPI_DEV(0)

Definition at line 121 of file board.h.

◆ BOOT_PIN

#define BOOT_PIN GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN)

BSL_BOOT Pin.

Definition at line 154 of file board.h.

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN

Definition at line 41 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO_PIN(3, 5)

Definition at line 40 of file board.h.

◆ CCA_BACKDOOR_ACTIVE_LEVEL

#define CCA_BACKDOOR_ACTIVE_LEVEL (0)

Active low.

Definition at line 152 of file board.h.

◆ CCA_BACKDOOR_ENABLE

#define CCA_BACKDOOR_ENABLE (1)

Definition at line 150 of file board.h.

◆ CCA_BACKDOOR_PORT_A_PIN

#define CCA_BACKDOOR_PORT_A_PIN (6)

BSL_BOOT Pin.

Definition at line 151 of file board.h.

◆ CONFIG_AT86RF215_RESET_PULSE_WIDTH_US

#define CONFIG_AT86RF215_RESET_PULSE_WIDTH_US (50000u)

board requires unusually long reset

Definition at line 129 of file board.h.

◆ CONFIG_CC2538_RF_OBS_SIG_0_PCX

#define CONFIG_CC2538_RF_OBS_SIG_0_PCX 5 /* PC5 */

Definition at line 84 of file board.h.

◆ CONFIG_CC2538_RF_OBS_SIG_1_PCX

#define CONFIG_CC2538_RF_OBS_SIG_1_PCX 6 /* PC6 */

Definition at line 85 of file board.h.

◆ CONFIG_CC2538_RF_OBS_SIG_2_PCX

#define CONFIG_CC2538_RF_OBS_SIG_2_PCX 7 /* PC7 */

Definition at line 86 of file board.h.

◆ LED0_MASK

#define LED0_MASK (1 << 4)

Definition at line 46 of file board.h.

◆ LED0_OFF

#define LED0_OFF (LED_PORT->DATA |= LED0_MASK)

Definition at line 56 of file board.h.

◆ LED0_ON

#define LED0_ON (LED_PORT->DATA &= ~LED0_MASK)

Definition at line 55 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(2, 4)

Definition at line 36 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE (LED_PORT->DATA ^= LED0_MASK)

Definition at line 57 of file board.h.

◆ LED1_MASK

#define LED1_MASK (1 << 7)

Definition at line 47 of file board.h.

◆ LED1_OFF

#define LED1_OFF (LED_PORT->DATA |= LED1_MASK)

Definition at line 60 of file board.h.

◆ LED1_ON

#define LED1_ON (LED_PORT->DATA &= ~LED1_MASK)

Definition at line 59 of file board.h.

◆ LED1_PIN

#define LED1_PIN GPIO_PIN(2, 7)

Definition at line 37 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE (LED_PORT->DATA ^= LED1_MASK)

Definition at line 61 of file board.h.

◆ LED2_MASK

#define LED2_MASK (1 << 6)

Definition at line 48 of file board.h.

◆ LED2_OFF

#define LED2_OFF (LED_PORT->DATA |= LED2_MASK)

Definition at line 64 of file board.h.

◆ LED2_ON

#define LED2_ON (LED_PORT->DATA &= ~LED2_MASK)

Definition at line 63 of file board.h.

◆ LED2_PIN

#define LED2_PIN GPIO_PIN(2, 6)

Definition at line 38 of file board.h.

◆ LED2_TOGGLE

#define LED2_TOGGLE (LED_PORT->DATA ^= LED2_MASK)

Definition at line 65 of file board.h.

◆ LED3_MASK

#define LED3_MASK (1 << 5)

Definition at line 49 of file board.h.

◆ LED3_OFF

#define LED3_OFF (LED_PORT->DATA |= LED3_MASK)

Definition at line 68 of file board.h.

◆ LED3_ON

#define LED3_ON (LED_PORT->DATA &= ~LED3_MASK)

Definition at line 67 of file board.h.

◆ LED3_PIN

#define LED3_PIN GPIO_PIN(2, 5)

Definition at line 39 of file board.h.

◆ LED3_TOGGLE

#define LED3_TOGGLE (LED_PORT->DATA ^= LED3_MASK)

Definition at line 69 of file board.h.

◆ LED_PORT

#define LED_PORT GPIO_C

Definition at line 45 of file board.h.

◆ OPENWSN_DEBUGPIN_FRAME

#define OPENWSN_DEBUGPIN_FRAME GPIO_PIN(0, 7) /* A7 */

Definition at line 109 of file board.h.

◆ OPENWSN_DEBUGPIN_FSM

#define OPENWSN_DEBUGPIN_FSM GPIO_PIN(1, 2) /* B2 */

Definition at line 112 of file board.h.

◆ OPENWSN_DEBUGPIN_ISR

#define OPENWSN_DEBUGPIN_ISR GPIO_PIN(2, 3) /* C3 */

Definition at line 110 of file board.h.

◆ OPENWSN_DEBUGPIN_RADIO

#define OPENWSN_DEBUGPIN_RADIO GPIO_PIN(1, 0) /* B0 */

Definition at line 114 of file board.h.

◆ OPENWSN_DEBUGPIN_SLOT

#define OPENWSN_DEBUGPIN_SLOT GPIO_PIN(1, 3) /* B3 */

Definition at line 111 of file board.h.

◆ OPENWSN_DEBUGPIN_TASK

#define OPENWSN_DEBUGPIN_TASK GPIO_PIN(1, 1) /* B1 */

Definition at line 113 of file board.h.

◆ OPENWSN_LEDPIN_DEBUG

#define OPENWSN_LEDPIN_DEBUG LED2_PIN

Definition at line 99 of file board.h.

◆ OPENWSN_LEDPIN_ERROR

#define OPENWSN_LEDPIN_ERROR LED0_PIN

Definition at line 96 of file board.h.

◆ OPENWSN_LEDPIN_RADIO

#define OPENWSN_LEDPIN_RADIO LED3_PIN

Definition at line 98 of file board.h.

◆ OPENWSN_LEDPIN_SYNC

#define OPENWSN_LEDPIN_SYNC LED1_PIN

Definition at line 97 of file board.h.

◆ RF24_SWITCH_AT86RF215_MASK

#define RF24_SWITCH_AT86RF215_MASK (1 << 3)

Definition at line 53 of file board.h.

◆ RF24_SWITCH_AT86RF215_OFF

#define RF24_SWITCH_AT86RF215_OFF (RF_SWITCH_PORT->DATA |= RF24_SWITCH_AT86RF215_MASK)

Definition at line 76 of file board.h.

◆ RF24_SWITCH_AT86RF215_ON

#define RF24_SWITCH_AT86RF215_ON (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_AT86RF215_MASK)

Definition at line 75 of file board.h.

◆ RF24_SWITCH_AT86RF215_PIN

#define RF24_SWITCH_AT86RF215_PIN GPIO_PIN(3, 3)

PD3 – AT86RF215.

Definition at line 43 of file board.h.

◆ RF24_SWITCH_AT86RF215_TOGGLE

#define RF24_SWITCH_AT86RF215_TOGGLE (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_AT86RF215_MASK)

Definition at line 77 of file board.h.

◆ RF24_SWITCH_CC2538_MASK

#define RF24_SWITCH_CC2538_MASK (1 << 4)

Definition at line 52 of file board.h.

◆ RF24_SWITCH_CC2538_OFF

#define RF24_SWITCH_CC2538_OFF (RF_SWITCH_PORT->DATA |= RF24_SWITCH_CC2538_MASK)

Definition at line 72 of file board.h.

◆ RF24_SWITCH_CC2538_ON

#define RF24_SWITCH_CC2538_ON (RF_SWITCH_PORT->DATA &= ~RF24_SWITCH_CC2538_MASK)

Definition at line 71 of file board.h.

◆ RF24_SWITCH_CC2538_PIN

#define RF24_SWITCH_CC2538_PIN GPIO_PIN(3, 4)

PD4 – CC2538.

Definition at line 42 of file board.h.

◆ RF24_SWITCH_CC2538_TOGGLE

#define RF24_SWITCH_CC2538_TOGGLE (RF_SWITCH_PORT->DATA ^= RF24_SWITCH_CC2538_MASK)

Definition at line 73 of file board.h.

◆ RF_SWITCH_PORT

#define RF_SWITCH_PORT GPIO_D

Definition at line 51 of file board.h.

◆ UPDATE_CCA

#define UPDATE_CCA (1)

Definition at line 147 of file board.h.

◆ XTIMER_BACKOFF

#define XTIMER_BACKOFF (50)

Definition at line 138 of file board.h.

◆ XTIMER_ISR_BACKOFF

#define XTIMER_ISR_BACKOFF (40)

Definition at line 139 of file board.h.

◆ XTIMER_WIDTH

#define XTIMER_WIDTH (16)

Definition at line 137 of file board.h.