generic-cc2538-cc2592-dk_2include_2board_8h_source.html

/*

 * Copyright (C) 2024 Marian Buschsieweke

 *

 * This file is subject to the terms and conditions of the GNU Lesser

 * General Public License v2.1. See the file LICENSE in the top level

 * directory for more details.

 */


#ifndef BOARD_H

#define BOARD_H


#include "cpu.h"

#include "periph/gpio.h"

#include "cc2538_eui_primary.h"


#ifdef __cplusplus

extern "C" {

#endif


#define LED_GREEN_PIN       GPIO_PIN(PORT_C, 0)

#define LED_GREEN_PORT      GPIO_C

#define LED_GREEN_BIT       (1U << 0)

#define LED0_PIN            LED_GREEN_PIN

#define LED0_PORT           LED_GREEN_PORT

#define LED0_BIT            LED_GREEN_BIT

#define LED_RED_PIN         GPIO_PIN(PORT_C, 1)

#define LED_RED_PORT        GPIO_C

#define LED_RED_BIT         (1U << 1)

#define LED1_PIN            LED_RED_PIN

#define LED1_PORT           LED_RED_PORT

#define LED1_BIT            LED_RED_BIT

#define LED_YELLOW_PIN      GPIO_PIN(PORT_B, 1)

#define LED_YELLOW_PORT     GPIO_B

#define LED_YELLOW_BIT      (1U << 1)

#define LED2_PIN            LED_YELLOW_PIN

#define LED2_PORT           LED_YELLOW_PORT

#define LED2_BIT            LED_YELLOW_BIT

#define LED_BLUE_PIN        GPIO_PIN(PORT_B, 0)

#define LED_BLUE_PORT       GPIO_B

#define LED_BLUE_BIT        (1U << 0)

#define LED3_PIN            LED_BLUE_PIN

#define LED3_PORT           LED_BLUE_PORT

#define LED3_BIT            LED_BLUE_BIT

#define LED0_ON             (LED0_PORT->DATA |=  LED0_BIT)

#define LED0_OFF            (LED0_PORT->DATA &= ~LED0_BIT)

#define LED0_TOGGLE         (LED0_PORT->DATA ^=  LED0_BIT)


#define LED1_ON             (LED1_PORT->DATA |=  LED1_BIT)

#define LED1_OFF            (LED1_PORT->DATA &= ~LED1_BIT)

#define LED1_TOGGLE         (LED1_PORT->DATA ^=  LED1_BIT)


#define LED2_ON             (LED2_PORT->DATA |=  LED2_BIT)

#define LED2_OFF            (LED2_PORT->DATA &= ~LED2_BIT)

#define LED2_TOGGLE         (LED2_PORT->DATA ^=  LED2_BIT)


#define LED3_ON             (LED3_PORT->DATA |=  LED3_BIT)

#define LED3_OFF            (LED3_PORT->DATA &= ~LED3_BIT)

#define LED3_TOGGLE         (LED3_PORT->DATA ^=  LED3_BIT)

#define BTN_LEFT_PIN        GPIO_PIN(PORT_C, 4)

#define BTN_LEFT_MODE       GPIO_IN_PU

#define BTN0_PIN            BTN_LEFT_PIN

#define BTN0_MODE           BTN_LEFT_MODE

#define BTN_RIGHT_PIN       GPIO_PIN(PORT_C, 5)

#define BTN_RIGHT_MODE      GPIO_IN_PU

#define BTN1_PIN            BTN_RIGHT_PIN

#define BTN1_MODE           BTN_RIGHT_MODE

#define BTN_UP_PIN          GPIO_PIN(PORT_C, 6)

#define BTN_UP_MODE         GPIO_IN_PU

#define BTN2_PIN            BTN_UP_PIN

#define BTN2_MODE           BTN_UP_MODE

#define BTN_DOWN_PIN        GPIO_PIN(PORT_C, 7)

#define BTN_DOWN_MODE       GPIO_IN_PU

#define BTN3_PIN            BTN_DOWN_PIN

#define BTN3_MODE           BTN_DOWN_MODE

#define BTN_SELECT_PIN      GPIO_PIN(PORT_A, 3)

#define BTN_SELECT_MODE     GPIO_IN_PU

#define BTN4_PIN            BTN_SELECT_PIN

#define BTN4_MODE           BTN_SELECT_MODE

#ifndef UPDATE_CCA

#define UPDATE_CCA                1

#endif


#define CCA_BACKDOOR_ENABLE       1

#define CCA_BACKDOOR_PORT_A_PIN   3

#define CCA_BACKDOOR_ACTIVE_LEVEL 0

#ifdef __cplusplus

} /* end extern "C" */

#endif


#endif /* BOARD_H */

cc2538_eui_primary.h
CC2538 EUI-64 provider.

gpio.h
Low-level GPIO peripheral driver interface definitions.