board.h File Reference

Board definitions for the ESP32-S3-USB-OTG boards. More...

Detailed Description

Board definitions for the ESP32-S3-USB-OTG boards.

Any modifications required for specific applications can be overridden by application-specific board configuration.

Author

Gunar Schorcht gunar.nosp@m.@sch.nosp@m.orcht.nosp@m..net

Definition in file board.h.

#include <stdint.h>
#include "board_common.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Button pin definitions
#define	BTN0_PIN   GPIO0
	BOOT/OK button GPIO pin definition.
#define	BTN0_MODE   GPIO_IN_PU
	BOOT/OK button GPIO mode definition.
#define	BTN0_INT_FLANK   GPIO_FALLING
	Default interrupt flank definition for the BOOT/OK button GPIO.
#define	BUTTON0_PIN   BTN0_PIN
	Definition for compatibility with previous versions.
#define	BTN1_PIN   GPIO14
	MENU button GPIO pin definition.
#define	BTN1_MODE   GPIO_IN_PU
	MENU button GPIO mode definition.
#define	BTN1_INT_FLANK   GPIO_FALLING
	Default interrupt flank definition for the MENU button GPIO.
#define	BUTTON1_PIN   BTN1_PIN
	Definition for compatibility with previous versions.
#define	BTN2_PIN   GPIO11
	DW- button GPIO pin definition.
#define	BTN2_MODE   GPIO_IN_PU
	DW- button GPIO mode definition.
#define	BTN2_INT_FLANK   GPIO_FALLING
	Default interrupt flank definition for the DW- button GPIO.
#define	BUTTON2_PIN   BTN2_PIN
	Definition for compatibility with previous versions.
#define	BTN3_PIN   GPIO10
	UP+ button GPIO pin definition.
#define	BTN3_MODE   GPIO_IN_PU
	UP+ button GPIO mode definition.
#define	BTN3_INT_FLANK   GPIO_FALLING
	Default interrupt flank definition for the UP+ button GPIO.
#define	BUTTON3_PIN   BTN3_PIN
	Definition for compatibility with previous versions.

LED (on-board) configuration
ESP32-S3-USB-OTG boards have two LEDs on board.
#define	LED0_PIN   GPIO15
	Green LED.
#define	LED0_ACTIVE   (1)
	Green LED is high active.
#define	LED1_PIN   GPIO16
	Yellow LED.
#define	LED1_ACTIVE   (1)
	Yellow LED is high active.

SD-Card interface configuration
SD-Card interface uses SPI_DEV(1) on this board.
#define	SDCARD_SPI_PARAM_SPI   SPI_DEV(1)
#define	SDCARD_SPI_PARAM_CS   SPI1_CS0
#define	SDCARD_SPI_PARAM_CLK   SPI1_SCK
#define	SDCARD_SPI_PARAM_MOSI   SPI1_MOSI
#define	SDCARD_SPI_PARAM_MISO   SPI1_MISO
#define	SDCARD_SPI_PARAM_POWER   GPIO_UNDEF

Macro Definition Documentation

BTN0_INT_FLANK

#define BTN0_INT_FLANK   GPIO_FALLING

Default interrupt flank definition for the BOOT/OK button GPIO.

Definition at line 45 of file board.h.

BTN0_MODE

#define BTN0_MODE   GPIO_IN_PU

BOOT/OK button GPIO mode definition.

Definition at line 39 of file board.h.

BTN0_PIN

#define BTN0_PIN   GPIO0

BOOT/OK button GPIO pin definition.

The BOOT button is connected to GPIO0 and is used as OK button during normal operation. The button is LOW active.

Definition at line 34 of file board.h.

BTN1_INT_FLANK

#define BTN1_INT_FLANK   GPIO_FALLING

Default interrupt flank definition for the MENU button GPIO.

Definition at line 69 of file board.h.

BTN1_MODE

#define BTN1_MODE   GPIO_IN_PU

MENU button GPIO mode definition.

Definition at line 63 of file board.h.

BTN1_PIN

#define BTN1_PIN   GPIO14

MENU button GPIO pin definition.

The MENU button is connected to GPIO14. It is LOW active.

Definition at line 58 of file board.h.

BTN2_INT_FLANK

#define BTN2_INT_FLANK   GPIO_FALLING

Default interrupt flank definition for the DW- button GPIO.

Definition at line 93 of file board.h.

BTN2_MODE

#define BTN2_MODE   GPIO_IN_PU

DW- button GPIO mode definition.

Definition at line 87 of file board.h.

BTN2_PIN

#define BTN2_PIN   GPIO11

DW- button GPIO pin definition.

The DW- button is connected to GPIO11. It is LOW active.

Definition at line 82 of file board.h.

BTN3_INT_FLANK

#define BTN3_INT_FLANK   GPIO_FALLING

Default interrupt flank definition for the UP+ button GPIO.

Definition at line 117 of file board.h.

BTN3_MODE

#define BTN3_MODE   GPIO_IN_PU

UP+ button GPIO mode definition.

Definition at line 111 of file board.h.

BTN3_PIN

#define BTN3_PIN   GPIO10

UP+ button GPIO pin definition.

The MENU button is connected to GPIO10. It is LOW active.

Definition at line 106 of file board.h.

BUTTON0_PIN

#define BUTTON0_PIN   BTN0_PIN

Definition for compatibility with previous versions.

Definition at line 51 of file board.h.

BUTTON1_PIN

#define BUTTON1_PIN   BTN1_PIN

Definition for compatibility with previous versions.

Definition at line 75 of file board.h.

BUTTON2_PIN

#define BUTTON2_PIN   BTN2_PIN

Definition for compatibility with previous versions.

Definition at line 99 of file board.h.

BUTTON3_PIN

#define BUTTON3_PIN   BTN3_PIN

Definition for compatibility with previous versions.

Definition at line 123 of file board.h.

LED0_ACTIVE

#define LED0_ACTIVE   (1)

Green LED is high active.

Definition at line 134 of file board.h.

LED0_PIN

#define LED0_PIN   GPIO15

Green LED.

Definition at line 133 of file board.h.

LED1_ACTIVE

#define LED1_ACTIVE   (1)

Yellow LED is high active.

Definition at line 137 of file board.h.

LED1_PIN

#define LED1_PIN   GPIO16

Yellow LED.

Definition at line 136 of file board.h.

SDCARD_SPI_PARAM_CLK

#define SDCARD_SPI_PARAM_CLK   SPI1_SCK

Definition at line 176 of file board.h.

SDCARD_SPI_PARAM_CS

#define SDCARD_SPI_PARAM_CS   SPI1_CS0

Definition at line 175 of file board.h.

SDCARD_SPI_PARAM_MISO

#define SDCARD_SPI_PARAM_MISO   SPI1_MISO

Definition at line 178 of file board.h.

SDCARD_SPI_PARAM_MOSI

#define SDCARD_SPI_PARAM_MOSI   SPI1_MOSI

Definition at line 177 of file board.h.

SDCARD_SPI_PARAM_POWER

#define SDCARD_SPI_PARAM_POWER   GPIO_UNDEF

Definition at line 179 of file board.h.

SDCARD_SPI_PARAM_SPI

#define SDCARD_SPI_PARAM_SPI   SPI_DEV(1)

Definition at line 174 of file board.h.