Loading...
Searching...
No Matches
gpio_params.h
Go to the documentation of this file.
1/*
2 * Copyright (C) 2018 Gunar Schorcht
3 *
4 * This file is subject to the terms and conditions of the GNU Lesser
5 * General Public License v2.1. See the file LICENSE in the top level
6 * directory for more details.
7 */
8
9#ifndef GPIO_PARAMS_H
10#define GPIO_PARAMS_H
11
20#include "board.h"
21#include "saul/periph.h"
22
23#ifdef __cplusplus
24extern "C" {
25#endif
26
30static const saul_gpio_params_t saul_gpio_params[] =
31{
32#ifdef LED0_PIN
33 {
34 .name = "LED red",
35 .pin = LED0_PIN,
36 .mode = GPIO_OUT,
37 .flags = SAUL_GPIO_INIT_CLEAR
38 },
39#endif
40#ifdef LED1_PIN
41 {
42 .name = "LED blue",
43 .pin = LED1_PIN,
44 .mode = GPIO_OUT,
45 .flags = SAUL_GPIO_INIT_CLEAR
46 },
47#endif
48#ifdef LED2_PIN
49 {
50 .name = "LED green",
51 .pin = LED2_PIN,
52 .mode = GPIO_OUT,
53 .flags = SAUL_GPIO_INIT_CLEAR
54 }
55#endif
56};
57
58#ifdef __cplusplus
59}
60#endif
61
62#endif /* GPIO_PARAMS_H */
saul_gpio_params
static const saul_gpio_params_t saul_gpio_params[]
LED configuration.
Definition gpio_params.h:33
LED1_PIN
#define LED1_PIN
TX LED yellow.
Definition board.h:34
LED2_PIN
#define LED2_PIN
RX LED yellow.
Definition board.h:35
GPIO_OUT
@ GPIO_OUT
select GPIO MASK as output
Definition periph_cpu.h:165
periph.h
Parameter definitions for mapping peripherals directly to SAUL.
SAUL_GPIO_INIT_CLEAR
@ SAUL_GPIO_INIT_CLEAR
set pin inactive after init
Definition periph.h:44
saul_gpio_params_t
Direct mapped GPIO configuration values.
Definition periph.h:51
saul_gpio_params_t::name
const char * name
name of the device connected to this pin
Definition periph.h:52
board.h
Board specific definitions for the Zigduino board.