Skip to content
RIOT Documentation

STM32 Peripheral Ethernet Driver

View API DocumentationView API documentation generated by Doxygen.
View on GitHubView this source code on GitHub.

Driver for the Peripheral STM32 Ethernet block used across all families of STM32 MCUs

Related CPUs

STM32All STM32 families code and definitions
Section titled “Link Auto Negotiation”

To enable Link Auto Negotiation, use the (pseudo) module stm32_eth_auto by amending your applications Makefile as follows:

# Add the following line to your Makefile
USEMODULE += stm32_eth_auto


# Note: Any addition of modules to USEMODULE must be done prior to the
# following line:
include $(RIOTBASE)/Makefile.include

In general, it is highly recommended to use auto-negotiation, as this can avoid various communication issues on the PHY layer due to configuration mismatch of the link partners. Note that this feature depends on the link state events feature.

Section titled “Link State Events”

To enable Link Events, use the (pseudo) module stm32_eth_link_up (as described above).