WeAct-G030F6 board

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to weact-g030f6 in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= weact-g030f6

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the WeAct-G030F6 board

Overview

WeAct-G030F6 is a cheap little board based on the STM32G030F6P6 MCU. It does not come with a programmer or USB connection, so an external programmer (ST-Link, DAP-Link, etc) has to be used.

It is available on sites like AliExpress for less than 2€.

Hardware

MCU

MCU	STM32G030F6P6
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	8KiB
Flash	32KiB
Frequency	up to 64MHz
FPU	no
Timers	8 (2x watchdog, 1 SysTick, 5x 16-bit)
ADCs	1x 12-bit
UARTs	2
SPIs	2
I2Cs	2
RTC	1
Vcc	2.0V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual