STM32F723E-DISCO board

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github

View API Documentation View API documentation generated by Doxygen.

View on GitHub View this source code on GitHub.

Support for the STM32F723E-DISCO board

Tip

When using this board with RIOT, set the BOARD variable to stm32f723e-disco in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= stm32f723e-disco

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32F723E-DISCO board

Overview

The ST STM32F723E-DISCO is an evaluation board supporting a ARM Cortex-M7 STM32F723IE microcontroller with 256KB of RAM and 523KB of ROM Flash.

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the STM32F723E-DISCO is stm32f723e-disco.

STDIO

STDIO is available via the ST-Link programmer.

Use the term target to open a terminal:

make BOARD=stm32f723e-disco -C examples/basic/hello-world term

USB OTG Peripheral Device Driver

By default, the USB OTG FS port is used. To use the USB OTG HS port with the internal UTMI+ HS PHY, enable the module periph_usbdev_hs_utmi:

make BOARD=stm32f723e-disco USEMODULE=periph_usbdev_hs_utmi -C examples/advanced/usbus_minimal