PhyNODE KW41Z

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to phynode-kw41z in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= phynode-kw41z

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the Phytec PhyNODE KW41Z Board

Overview

The Phytec PhyNODE-KW41Z board is a development platform based on the PhyWAVE-KW41z wireless module (populated with NXP Semiconductor Kinetis KW41Z microcontroller).

It provides a radio device with Bluetooth Low Energy and/or IEEE 802.15.4.

There’s also available an HDL1010 High Accuracy Digital Humidity sensor, a CCS811 IAQ gas sensor, a MMA8652FC accelerometer and a TCS37727 RGB Light sensor.

There board also provides an SSD1673 Active Matrix EPD 150x200 Display Driver with Controller on board.

Flash the board

To flash the board using OpenOCD:

1. Use BOARD=phynode-kw41z with the make command.
   Example with hello-world application:

     make BOARD=phynode-kw41z -C examples/basic/hello-world flash term

Current support

The TCS37727 RGB Light sensor, the MMA8652FC accelerometer and the CCS811 digital gas sensor are supported. There’s ongoing work on IEEE802.15.4 radio support for KW41Z