STM32 Nucleo-WL55JC

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on GitHub.

View API DocumentationView API documentation generated by Doxygen.

View on GitHubView this source code on GitHub.

Support for the STM32 Nucleo-W55JC

Tip

When using this board with RIOT, set the BOARD variable to nucleo-wl55jc in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-wl55jc

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-W55JC

Overview

The Nucleo-W55JC is a board from ST’s Nucleo family supporting ARM dual-core Cortex-M4/M0 STM ultra-low-power microcontroller with ultra-low-power LPWAN radio solution, 64KiB of RAM and 256KiB of Flash.

You can find general information about the Nucleo64 boards on the boards_common_nucleo64 page.

MCU

MCU	STM32WL55JC
Family	ARM Cortex-M4 / ARM Cortex-M0+ Dual core
Vendor	ST Microelectronics
RAM	64KiB
Flash	256KiB
Frequency	up to 48MHz
FPU	no
Timers	10 (2x watchdog, 1 SysTick, 6x 16-bit, 1x 32-bit [TIM2])
ADCs	1x 12-bit (12 channel )
UARTs	3 (two UARTs and one Low-Power UART)
SPIs	2
I2Cs	3
RTC	1
Vcc	1.8 V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual 1	Reference Manual - M4
Programming Manual 2	Reference Manual - M0
Board Manual	Board Manual
Board Schematic	Board Schematic
Additional Reference	Developing LoRaWAN Application

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-WL55JC is nucleo-wl55jc.