STM32 Nucleo-G474RE

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on GitHub.

View API DocumentationView API documentation generated by Doxygen.

View on GitHubView this source code on GitHub.

Support for the STM32 Nucleo-G474RE

Tip

When using this board with RIOT, set the BOARD variable to nucleo-g474re in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-g474re

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-G474RE

Overview

The Nucleo-G474RE is a board from ST’s Nucleo family supporting a ARM Cortex-M4 STM32G474RE microcontroller with 128KiB of RAM and 512KiB of Flash.

You can find general information about the Nucleo64 boards on the boards_common_nucleo64 page.

Pinout

MCU

MCU	STM32G474RE
Family	ARM Cortex-M4
Vendor	ST Microelectronics
RAM	128KiB
Flash	512KiB
Frequency	up to 170 MHz
Timers	17 (2x watchdog, 1 SysTick, 12x 16-bit and 2x 32-bit)
ADCs	5x 12 bit (up to 26 channels)
UARTs	5 (one UART, three USARTs and one Low-Power UART)
I2Cs	4
SPIs	3
CANs	3
RTC	1
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-G474RE is nucleo-g474re.