STM32 Nucleo-G071RB

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to nucleo-g071rb in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-g071rb

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-G071RB

Overview

The Nucleo-G071RB is a board from ST’s Nucleo family supporting a ARM Cortex-M0+ STM32G071RB microcontroller with 36KiB of RAM and 128KiB of Flash.

You can find general information about the Nucleo64 boards on the boards_common_nucleo64 page.

Pinout

MCU

MCU	STM32G071RB
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	36KiB
Flash	128KiB
Frequency	up to 64 MHz
Timers	14 (2x watchdog, 1 SysTick, 10x 16-bit and 1 32-bit)
ADCs	1x 12 bit (up to 16 channels)
UARTs	5 (four USARTs and one Low-Power UART)
I2Cs	2
SPIs	2
RTC	1
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-G071RB is nucleo-g071rb.