STM32 Nucleo-C071RB

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to nucleo-c071rb in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= nucleo-c071rb

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the STM32 Nucleo-C071RB

Overview

The Nucleo-C071RB is a board from ST’s Nucleo family supporting a ARM Cortex-M0+ STM32C071RB microcontroller with 24KiB of RAM and 128KiB of Flash.

You can find general information about the Nucleo64 boards on the boards_common_nucleo64 page.

Pinout

See Board Manual referenced below, section 7 pages 19-21.

MCU

MCU	STM32C071RB
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	24KiB
Flash	128KiB
Frequency	up to 48MHz
FPU	no
Timers	12 (2x watchdog, 1 SysTick, 5x 16-bit)
ADCs	1x 12-bit (up to 19 channels)
UARTs	2
SPIs	1
I2Cs	1
RTC	1
Vcc	2.0V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the Nucleo-C071RB is nucleo-c071rb.