Adafruit Feather nRF52840 Sense

Caution

This page is automatically generated from RIOT doxygen documentation. If you find any issues or have suggestions for improvement, please report them on Github.

View Doxygen Documentation View this board's documentation as generated by Doxygen.

View on GitHub View this board's source code on GitHub.

Tip

When using this board with RIOT, set the BOARD variable to adafruit-feather-nrf52840-sense in your Makefile. If you follow the standard RIOT project structure, your Makefile should look like this:

./Makefile

# name of your application
APPLICATION = hello-world

# Change this to your board if you want to build for a different board
BOARD ?= adafruit-feather-nrf52840-sense

# This has to be the absolute path to the RIOT base directory:
RIOTBASE ?= $(CURDIR)/RIOT

include $(RIOTBASE)/Makefile.include

Support for the Adafruit Feather nRF52840 Sense

General information

The Feather nRF52840 Sense is a development board from Adafruits Feather board family. It is very similar to the Feather nRF52840 Express but comes with more sensors.

It provides native USB support, Bluetooth Low Energy and IEEE 802.15.4 support via the nRF52840 MCU.

Flashing, Bootloader, and Terminal

Refer to the Feather nRF52840 Express documentation for further details. Details to the Flashing process can be found in the common Adafruit nRF52 Bootloader documentation. Both use the same flasher, bootloader, and terminal settings.

Example with hello-world application:

make BOARD=adafruit-feather-nrf52840-sense -C examples/basic/hello-world flash term