board_info.h

Go to the documentation of this file.

/*
 * Copyright (C) 2017 Hamburg University of Applied Sciences
 *               2020 Inria
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef BOARD_INFO_H
#define BOARD_INFO_H
 
#include <stdint.h>
#include <string.h>
 
#include "board.h"
#include "periph_conf.h"
#include "timex.h"
 
#if defined __has_include
#  if __has_include ("openwsn_defs.h")
#    include "openwsn_defs.h"
#  endif
#endif
 
#ifdef __cplusplus
extern "C" {
#endif
 
#define INTERRUPT_DECLARATION()             unsigned irq_state;
#define DISABLE_INTERRUPTS()                irq_state = irq_disable();
#define ENABLE_INTERRUPTS()                 irq_restore(irq_state);
#define SCHEDULER_WAKEUP()                  /* unused by RIOT */
#define SCHEDULER_ENABLE_INTERRUPT()        /* unused by RIOT */
/* Always 32bit when using ztimer */
#if RTT_MAX_VALUE == UINT32_MAX || !((RTT_MAX_VALUE + 1) & (RTT_MAX_VALUE)) || \
    IS_USED(MODULE_OPENWSN_SCTIMER_ZTIMER)
#define PORT_TIMER_WIDTH                    uint32_t
#define PORT_RADIOTIMER_WIDTH               uint32_t
#else
#error "RTT_MAX_VALUE not supported"
#endif
 
#if __SIZEOF_POINTER__ == 2
#define PORT_SIGNED_INT_WIDTH               int16_t
#else
#define PORT_SIGNED_INT_WIDTH               int32_t
#endif
 
#define SCTIMER_FREQUENCY                   (32768U)
 
/* 32 ticks @32768Hz */
#define PORT_TICS_PER_MS                    (SCTIMER_FREQUENCY / MS_PER_SEC)
/* 30 us per tick @32768Hz */
#define PORT_US_PER_TICK                    (US_PER_SEC / SCTIMER_FREQUENCY)
/* standard slot duration is 10ms but code execution time for most OpenWSN
   supported BOARDS takes longer than 10ms, so use the default 20ms upstream
   slot */
#ifndef SLOTDURATION
#define SLOTDURATION        20        /* in milliseconds */
#endif
 
#if SLOTDURATION == 20
#ifndef PORT_TsSlotDuration     /* 655 ticks at @32768Hz */
#define PORT_TsSlotDuration     ((SCTIMER_FREQUENCY * SLOTDURATION) / MS_PER_SEC)
#endif
 
/* Execution speed related parameters */
#ifndef PORT_maxTxDataPrepare
#define PORT_maxTxDataPrepare   (3355 / PORT_US_PER_TICK )  /* ~110 ticks at @32768Hz */
#endif
#ifndef PORT_maxRxAckPrepare
#define PORT_maxRxAckPrepare    (610 / PORT_US_PER_TICK )   /* ~20 ticks at @32768Hz */
#endif
#ifndef PORT_maxRxDataPrepare
#define PORT_maxRxDataPrepare   (1000 / PORT_US_PER_TICK )  /* ~33 ticks at@32768Hz */
#endif
#ifndef PORT_maxTxAckPrepare
#define PORT_maxTxAckPrepare    (1525 / PORT_US_PER_TICK )  /* ~50 ticks at@32768Hz */
#endif
 
/* Radio speed related parameters */
#ifndef PORT_delayTx
#define PORT_delayTx            (300 / PORT_US_PER_TICK )   /* ~10 ticks at@32768Hz */
#endif
#ifndef PORT_delayRx
#define PORT_delayRx            (0 / PORT_US_PER_TICK )     /* ~0 ticks at@32768Hz */
#endif
#else
#error "Only 20ms slot duration is currently supported"
#endif
 /* SLOTDURATION == 20 */
 
#define SYNC_ACCURACY   (1)    /* ticks */
#ifdef __cplusplus
}
#endif
 
#endif /* BOARD_INFO_H */