Register Definitions for the AT86RF215 chip. More...
Detailed Description
Register Definitions for the AT86RF215 chip.
Definition in file at86rf215_registers.h.
#include <stdint.h>#include "vendor/at86rf215.h"
Include dependency graph for at86rf215_registers.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
Data Structures | |
| struct | at86rf215_RF_regs |
| Radio Frontend registers. More... | |
| struct | at86rf215_BBC_regs |
| Base Band Controller registers. More... | |
Macros | |
| #define | CCF0_24G_OFFSET 1500000U |
| offset (in Hz) for CCF0 in 2.4 GHz mode | |
| #define | RF_RCUT_FS_BY_8 (0x0 << RXDFE_RCUT_SHIFT) |
| Fcut = 0.25 * Fs/2. | |
| #define | RF_RCUT_FS_BY_5P3 (0x1 << RXDFE_RCUT_SHIFT) |
| Fcut = 0.375 * Fs/2. | |
| #define | RF_RCUT_FS_BY_4 (0x2 << RXDFE_RCUT_SHIFT) |
| Fcut = 0.5 * Fs/2. | |
| #define | RF_RCUT_FS_BY_2P6 (0x3 << RXDFE_RCUT_SHIFT) |
| Fcut = 0.75 * Fs/2. | |
| #define | RF_RCUT_FS_BY_2 (0x4 << RXDFE_RCUT_SHIFT) |
| Fcut = 1.0 * Fs/2. | |
| #define | BB_MCS_BPSK_REP4 0 |
| BPSK, rate ½, 4 x frequency repetition. | |
| #define | BB_MCS_BPSK_REP2 1 |
| BPSK, rate ½, 2 x frequency repetition. | |
| #define | BB_MCS_QPSK_REP2 2 |
| QPSK, rate ½, 2 x frequency repetition. | |
| #define | BB_MCS_QPSK_1BY2 3 |
| QPSK, rate ½ | |
| #define | BB_MCS_QPSK_3BY4 4 |
| QPSK, rate ¾ | |
| #define | BB_MCS_16QAM_1BY2 5 |
| 16-QAM, rate ½ | |
| #define | BB_MCS_16QAM_3BY4 6 |
| 16-QAM, rate ¾ | |
| #define | RXM_MR_OQPSK 0x0 |
| receive only MR-O-QPSK | |
| #define | RXM_LEGACY_OQPSK 0x1 |
| receive only legacy O-QPSK | |
| #define | RXM_BOTH_OQPSK 0x2 |
| receive both legacy & MR-O-QPSK | |
| #define | RXM_DISABLE 0x3 |
| receive nothing | |
| #define | FSK_MORD_2SFK (0 << FSKC0_MORD_SHIFT) |
| Modulation Order 2-FSK. | |
| #define | FSK_MORD_4SFK (1 << FSKC0_MORD_SHIFT) |
| Modulation Order 4-FSK. | |
| #define | FSKC3_SFDT(n) (((n) << FSKC3_SFDT_SHIFT) & FSKC3_SFDT_MASK) |
| Lower values increase the SFD detector sensitivity. | |
| #define | FSKC3_PDT(n) (((n) << FSKC3_PDT_SHIFT) & FSKC3_PDT_MASK) |
| Lower values increase the preamble detector sensitivity. | |
Part Numbers | |
| #define | AT86RF215_PN (0x34) /* sub-GHz & 2.4 GHz */ |
| #define | AT86RF215IQ_PN (0x35) /* I/Q radio only */ |
| #define | AT86RF215M_PN (0x36) /* sub-GHz only */ |
SPI command prefixes | |
| #define | FLAG_WRITE 0x8000 |
| #define | FLAG_READ 0x0000 |
Radio Commands written to RF->RG_CMD | |
| #define | CMD_RF_NOP 0x0 |
| #define | CMD_RF_SLEEP 0x1 |
| #define | CMD_RF_TRXOFF 0x2 |
| #define | CMD_RF_TXPREP 0x3 |
| #define | CMD_RF_TX 0x4 |
| #define | CMD_RF_RX 0x5 |
| #define | CMD_RF_RESET |
Radio States, read from RF->RG_STATE | |
| #define | RF_STATE_TRXOFF 0x2 /* Transceiver off, SPI active */ |
| #define | RF_STATE_TXPREP 0x3 /* Transmit preparation */ |
| #define | RF_STATE_TX 0x4 /* Transmit */ |
| #define | RF_STATE_RX 0x5 /* Receive */ |
| #define | RF_STATE_TRANSITION 0x6 /* State transition in progress */ |
| #define | RF_STATE_RESET 0x7 /* Transceiver is in state RESET or SLEEP */ |
| #define | RF_SR_4000K 0x1 |
| The sub-register configures the sampling frequency of the received signal. | |
| #define | RF_SR_2000K 0x2 |
| #define | RF_SR_1333K 0x3 |
| #define | RF_SR_1000K 0x4 |
| #define | RF_SR_800K 0x5 |
| #define | RF_SR_666K 0x6 |
| #define | RF_SR_500K 0x8 |
| #define | RF_SR_400K 0xA |
| #define | RF_DTB_2_US 0x0 |
| The averaging time is calculated by T[μs]=DF*DTB. | |
| #define | RF_DTB_8_US 0x1 |
| #define | RF_DTB_32_US 0x2 |
| #define | RF_DTB_128_US 0x3 |
| #define | FSK_MIDX_3_BY_8 (0 << FSKC0_MIDX_SHIFT) |
| FSK modulation index. | |
| #define | FSK_MIDX_4_BY_8 (1 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_6_BY_8 (2 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_8_BY_8 (3 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_10_BY_8 (4 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_12_BY_8 (5 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_14_BY_8 (6 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDX_16_BY_8 (7 << FSKC0_MIDX_SHIFT) |
| #define | FSK_MIDXS_SCALE_7_BY_8 (0 << FSKC0_MIDXS_SHIFT) |
| FSK modulation index scale. | |
| #define | FSK_MIDXS_SCALE_8_BY_8 (1 << FSKC0_MIDXS_SHIFT) |
| #define | FSK_MIDXS_SCALE_9_BY_8 (2 << FSKC0_MIDXS_SHIFT) |
| #define | FSK_MIDXS_SCALE_10_BY_8 (3 << FSKC0_MIDXS_SHIFT) |
| #define | FSK_BT_05 (0 << FSKC0_BT_SHIFT) |
| FSK bandwidth time product. | |
| #define | FSK_BT_10 (1 << FSKC0_BT_SHIFT) |
| #define | FSK_BT_15 (2 << FSKC0_BT_SHIFT) |
| #define | FSK_BT_20 (3 << FSKC0_BT_SHIFT) |
| #define | FSK_SRATE_50K 0x0 |
| FSK symbol rate (kHz) | |
| #define | FSK_SRATE_100K 0x1 |
| #define | FSK_SRATE_150K 0x2 |
| #define | FSK_SRATE_200K 0x3 |
| #define | FSK_SRATE_300K 0x4 |
| #define | FSK_SRATE_400K 0x5 |
| #define | FSK_CHANNEL_SPACING_200K 0x0 |
| FSK channel spacing (kHz) | |
| #define | FSK_CHANNEL_SPACING_400K 0x1 |
sub-GHz Radio Frontend register map | |
| static const struct at86rf215_RF_regs | RF09_regs |
| static const struct at86rf215_BBC_regs | BBC0_regs |
2.4 GHz Radio Frontend register map | |
| static const struct at86rf215_RF_regs | RF24_regs |
| static const struct at86rf215_BBC_regs | BBC1_regs |
Macro Definition Documentation
◆ AT86RF215_PN
| #define AT86RF215_PN (0x34) /* sub-GHz & 2.4 GHz */ |
Definition at line 441 of file at86rf215_registers.h.
◆ AT86RF215IQ_PN
| #define AT86RF215IQ_PN (0x35) /* I/Q radio only */ |
Definition at line 442 of file at86rf215_registers.h.
◆ AT86RF215M_PN
| #define AT86RF215M_PN (0x36) /* sub-GHz only */ |
Definition at line 443 of file at86rf215_registers.h.
◆ BB_MCS_16QAM_1BY2
| #define BB_MCS_16QAM_1BY2 5 |
16-QAM, rate ½
Definition at line 529 of file at86rf215_registers.h.
◆ BB_MCS_16QAM_3BY4
| #define BB_MCS_16QAM_3BY4 6 |
16-QAM, rate ¾
Definition at line 531 of file at86rf215_registers.h.
◆ BB_MCS_BPSK_REP2
| #define BB_MCS_BPSK_REP2 1 |
BPSK, rate ½, 2 x frequency repetition.
Definition at line 521 of file at86rf215_registers.h.
◆ BB_MCS_BPSK_REP4
| #define BB_MCS_BPSK_REP4 0 |
BPSK, rate ½, 4 x frequency repetition.
Definition at line 519 of file at86rf215_registers.h.
◆ BB_MCS_QPSK_1BY2
| #define BB_MCS_QPSK_1BY2 3 |
QPSK, rate ½
Definition at line 525 of file at86rf215_registers.h.
◆ BB_MCS_QPSK_3BY4
| #define BB_MCS_QPSK_3BY4 4 |
QPSK, rate ¾
Definition at line 527 of file at86rf215_registers.h.
◆ BB_MCS_QPSK_REP2
| #define BB_MCS_QPSK_REP2 2 |
QPSK, rate ½, 2 x frequency repetition.
Definition at line 523 of file at86rf215_registers.h.
◆ CCF0_24G_OFFSET
| #define CCF0_24G_OFFSET 1500000U |
offset (in Hz) for CCF0 in 2.4 GHz mode
Definition at line 480 of file at86rf215_registers.h.
◆ CMD_RF_NOP
| #define CMD_RF_NOP 0x0 |
Definition at line 458 of file at86rf215_registers.h.
◆ CMD_RF_RESET
| #define CMD_RF_RESET |
Definition at line 464 of file at86rf215_registers.h.
◆ CMD_RF_RX
| #define CMD_RF_RX 0x5 |
Definition at line 463 of file at86rf215_registers.h.
◆ CMD_RF_SLEEP
| #define CMD_RF_SLEEP 0x1 |
Definition at line 459 of file at86rf215_registers.h.
◆ CMD_RF_TRXOFF
| #define CMD_RF_TRXOFF 0x2 |
Definition at line 460 of file at86rf215_registers.h.
◆ CMD_RF_TX
| #define CMD_RF_TX 0x4 |
Definition at line 462 of file at86rf215_registers.h.
◆ CMD_RF_TXPREP
| #define CMD_RF_TXPREP 0x3 |
Definition at line 461 of file at86rf215_registers.h.
◆ FLAG_READ
| #define FLAG_READ 0x0000 |
Definition at line 451 of file at86rf215_registers.h.
◆ FLAG_WRITE
| #define FLAG_WRITE 0x8000 |
Definition at line 450 of file at86rf215_registers.h.
◆ FSK_BT_05
| #define FSK_BT_05 (0 << FSKC0_BT_SHIFT) |
FSK bandwidth time product.
Definition at line 575 of file at86rf215_registers.h.
◆ FSK_BT_10
| #define FSK_BT_10 (1 << FSKC0_BT_SHIFT) |
Definition at line 576 of file at86rf215_registers.h.
◆ FSK_BT_15
| #define FSK_BT_15 (2 << FSKC0_BT_SHIFT) |
Definition at line 577 of file at86rf215_registers.h.
◆ FSK_BT_20
| #define FSK_BT_20 (3 << FSKC0_BT_SHIFT) |
Definition at line 578 of file at86rf215_registers.h.
◆ FSK_CHANNEL_SPACING_200K
| #define FSK_CHANNEL_SPACING_200K 0x0 |
FSK channel spacing (kHz)
Definition at line 597 of file at86rf215_registers.h.
◆ FSK_CHANNEL_SPACING_400K
| #define FSK_CHANNEL_SPACING_400K 0x1 |
Definition at line 598 of file at86rf215_registers.h.
◆ FSK_MIDX_10_BY_8
| #define FSK_MIDX_10_BY_8 (4 << FSKC0_MIDX_SHIFT) |
Definition at line 555 of file at86rf215_registers.h.
◆ FSK_MIDX_12_BY_8
| #define FSK_MIDX_12_BY_8 (5 << FSKC0_MIDX_SHIFT) |
Definition at line 556 of file at86rf215_registers.h.
◆ FSK_MIDX_14_BY_8
| #define FSK_MIDX_14_BY_8 (6 << FSKC0_MIDX_SHIFT) |
Definition at line 557 of file at86rf215_registers.h.
◆ FSK_MIDX_16_BY_8
| #define FSK_MIDX_16_BY_8 (7 << FSKC0_MIDX_SHIFT) |
Definition at line 558 of file at86rf215_registers.h.
◆ FSK_MIDX_3_BY_8
| #define FSK_MIDX_3_BY_8 (0 << FSKC0_MIDX_SHIFT) |
FSK modulation index.
Definition at line 551 of file at86rf215_registers.h.
◆ FSK_MIDX_4_BY_8
| #define FSK_MIDX_4_BY_8 (1 << FSKC0_MIDX_SHIFT) |
Definition at line 552 of file at86rf215_registers.h.
◆ FSK_MIDX_6_BY_8
| #define FSK_MIDX_6_BY_8 (2 << FSKC0_MIDX_SHIFT) |
Definition at line 553 of file at86rf215_registers.h.
◆ FSK_MIDX_8_BY_8
| #define FSK_MIDX_8_BY_8 (3 << FSKC0_MIDX_SHIFT) |
Definition at line 554 of file at86rf215_registers.h.
◆ FSK_MIDXS_SCALE_10_BY_8
| #define FSK_MIDXS_SCALE_10_BY_8 (3 << FSKC0_MIDXS_SHIFT) |
Definition at line 568 of file at86rf215_registers.h.
◆ FSK_MIDXS_SCALE_7_BY_8
| #define FSK_MIDXS_SCALE_7_BY_8 (0 << FSKC0_MIDXS_SHIFT) |
FSK modulation index scale.
Definition at line 565 of file at86rf215_registers.h.
◆ FSK_MIDXS_SCALE_8_BY_8
| #define FSK_MIDXS_SCALE_8_BY_8 (1 << FSKC0_MIDXS_SHIFT) |
Definition at line 566 of file at86rf215_registers.h.
◆ FSK_MIDXS_SCALE_9_BY_8
| #define FSK_MIDXS_SCALE_9_BY_8 (2 << FSKC0_MIDXS_SHIFT) |
Definition at line 567 of file at86rf215_registers.h.
◆ FSK_MORD_2SFK
| #define FSK_MORD_2SFK (0 << FSKC0_MORD_SHIFT) |
Modulation Order 2-FSK.
Definition at line 543 of file at86rf215_registers.h.
◆ FSK_MORD_4SFK
| #define FSK_MORD_4SFK (1 << FSKC0_MORD_SHIFT) |
Modulation Order 4-FSK.
Definition at line 545 of file at86rf215_registers.h.
◆ FSK_SRATE_100K
| #define FSK_SRATE_100K 0x1 |
Definition at line 586 of file at86rf215_registers.h.
◆ FSK_SRATE_150K
| #define FSK_SRATE_150K 0x2 |
Definition at line 587 of file at86rf215_registers.h.
◆ FSK_SRATE_200K
| #define FSK_SRATE_200K 0x3 |
Definition at line 588 of file at86rf215_registers.h.
◆ FSK_SRATE_300K
| #define FSK_SRATE_300K 0x4 |
Definition at line 589 of file at86rf215_registers.h.
◆ FSK_SRATE_400K
| #define FSK_SRATE_400K 0x5 |
Definition at line 590 of file at86rf215_registers.h.
◆ FSK_SRATE_50K
| #define FSK_SRATE_50K 0x0 |
FSK symbol rate (kHz)
Definition at line 585 of file at86rf215_registers.h.
◆ FSKC3_PDT
| #define FSKC3_PDT | ( | n | ) | (((n) << FSKC3_PDT_SHIFT) & FSKC3_PDT_MASK) |
Lower values increase the preamble detector sensitivity.
Definition at line 608 of file at86rf215_registers.h.
◆ FSKC3_SFDT
| #define FSKC3_SFDT | ( | n | ) | (((n) << FSKC3_SFDT_SHIFT) & FSKC3_SFDT_MASK) |
Lower values increase the SFD detector sensitivity.
Higher values increase the SFD selectivity. The default value 8 is recommended for simultaneous sensing of the SFD pairs according to IEEE 802.15.4g.
Definition at line 605 of file at86rf215_registers.h.
◆ RF_DTB_128_US
| #define RF_DTB_128_US 0x3 |
Definition at line 515 of file at86rf215_registers.h.
◆ RF_DTB_2_US
| #define RF_DTB_2_US 0x0 |
The averaging time is calculated by T[μs]=DF*DTB.
Definition at line 512 of file at86rf215_registers.h.
◆ RF_DTB_32_US
| #define RF_DTB_32_US 0x2 |
Definition at line 514 of file at86rf215_registers.h.
◆ RF_DTB_8_US
| #define RF_DTB_8_US 0x1 |
Definition at line 513 of file at86rf215_registers.h.
◆ RF_RCUT_FS_BY_2
| #define RF_RCUT_FS_BY_2 (0x4 << RXDFE_RCUT_SHIFT) |
Fcut = 1.0 * Fs/2.
Definition at line 507 of file at86rf215_registers.h.
◆ RF_RCUT_FS_BY_2P6
| #define RF_RCUT_FS_BY_2P6 (0x3 << RXDFE_RCUT_SHIFT) |
Fcut = 0.75 * Fs/2.
Definition at line 505 of file at86rf215_registers.h.
◆ RF_RCUT_FS_BY_4
| #define RF_RCUT_FS_BY_4 (0x2 << RXDFE_RCUT_SHIFT) |
Fcut = 0.5 * Fs/2.
Definition at line 503 of file at86rf215_registers.h.
◆ RF_RCUT_FS_BY_5P3
| #define RF_RCUT_FS_BY_5P3 (0x1 << RXDFE_RCUT_SHIFT) |
Fcut = 0.375 * Fs/2.
Definition at line 501 of file at86rf215_registers.h.
◆ RF_RCUT_FS_BY_8
| #define RF_RCUT_FS_BY_8 (0x0 << RXDFE_RCUT_SHIFT) |
Fcut = 0.25 * Fs/2.
Definition at line 499 of file at86rf215_registers.h.
◆ RF_SR_1000K
| #define RF_SR_1000K 0x4 |
Definition at line 489 of file at86rf215_registers.h.
◆ RF_SR_1333K
| #define RF_SR_1333K 0x3 |
Definition at line 488 of file at86rf215_registers.h.
◆ RF_SR_2000K
| #define RF_SR_2000K 0x2 |
Definition at line 487 of file at86rf215_registers.h.
◆ RF_SR_4000K
| #define RF_SR_4000K 0x1 |
The sub-register configures the sampling frequency of the received signal.
Undefined values are mapped to default setting fS=4000kHz
Definition at line 486 of file at86rf215_registers.h.
◆ RF_SR_400K
| #define RF_SR_400K 0xA |
Definition at line 493 of file at86rf215_registers.h.
◆ RF_SR_500K
| #define RF_SR_500K 0x8 |
Definition at line 492 of file at86rf215_registers.h.
◆ RF_SR_666K
| #define RF_SR_666K 0x6 |
Definition at line 491 of file at86rf215_registers.h.
◆ RF_SR_800K
| #define RF_SR_800K 0x5 |
Definition at line 490 of file at86rf215_registers.h.
◆ RF_STATE_RESET
| #define RF_STATE_RESET 0x7 /* Transceiver is in state RESET or SLEEP */ |
Definition at line 476 of file at86rf215_registers.h.
◆ RF_STATE_RX
| #define RF_STATE_RX 0x5 /* Receive */ |
Definition at line 474 of file at86rf215_registers.h.
◆ RF_STATE_TRANSITION
| #define RF_STATE_TRANSITION 0x6 /* State transition in progress */ |
Definition at line 475 of file at86rf215_registers.h.
◆ RF_STATE_TRXOFF
| #define RF_STATE_TRXOFF 0x2 /* Transceiver off, SPI active */ |
Definition at line 471 of file at86rf215_registers.h.
◆ RF_STATE_TX
| #define RF_STATE_TX 0x4 /* Transmit */ |
Definition at line 473 of file at86rf215_registers.h.
◆ RF_STATE_TXPREP
| #define RF_STATE_TXPREP 0x3 /* Transmit preparation */ |
Definition at line 472 of file at86rf215_registers.h.
◆ RXM_BOTH_OQPSK
| #define RXM_BOTH_OQPSK 0x2 |
receive both legacy & MR-O-QPSK
Definition at line 538 of file at86rf215_registers.h.
◆ RXM_DISABLE
| #define RXM_DISABLE 0x3 |
receive nothing
Definition at line 540 of file at86rf215_registers.h.
◆ RXM_LEGACY_OQPSK
| #define RXM_LEGACY_OQPSK 0x1 |
receive only legacy O-QPSK
Definition at line 536 of file at86rf215_registers.h.
◆ RXM_MR_OQPSK
| #define RXM_MR_OQPSK 0x0 |
receive only MR-O-QPSK
Definition at line 534 of file at86rf215_registers.h.
Variable Documentation
◆ BBC0_regs
|
static |
Definition at line 243 of file at86rf215_registers.h.
◆ BBC1_regs
|
static |
Definition at line 342 of file at86rf215_registers.h.
◆ RF09_regs
|
static |
Definition at line 169 of file at86rf215_registers.h.
◆ RF24_regs
|
static |
Definition at line 206 of file at86rf215_registers.h.
