board.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2019 ML!PA Consulting GmbH
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once

 
#include "cpu.h"
#include "periph/gpio.h"
 
#ifdef __cplusplus
extern "C" {
#endif

#define AT24MAC_PARAM_I2C_DEV   I2C_DEV(1)
#define AT24MAC_PARAM_I2C_ADDR  (0x5E)
#define AT24MAC_PARAM_TYPE      AT24MAC4XX
#define AT24CXXX_PARAM_I2C      I2C_DEV(1)
#define AT24CXXX_PARAM_ADDR     (0x56)

#define ATCA_PARAM_I2C           I2C_DEV(1)

#define LED0_PIN            GPIO_PIN(PC, 18)
 
#define LED_PORT            PORT->Group[PC]
#define LED0_MASK           (1 << 18)
 
#define LED0_ON             (LED_PORT.OUTCLR.reg = LED0_MASK)
#define LED0_OFF            (LED_PORT.OUTSET.reg = LED0_MASK)
#define LED0_TOGGLE         (LED_PORT.OUTTGL.reg = LED0_MASK)
 
#define LED1_PIN            GPIO_PIN(PC, 15)
 
#define LED_PORT            PORT->Group[PC]
#define LED1_MASK           (1 << 15)
 
#define LED1_ON             (LED_PORT.OUTCLR.reg = LED1_MASK)
#define LED1_OFF            (LED_PORT.OUTSET.reg = LED1_MASK)
#define LED1_TOGGLE         (LED_PORT.OUTTGL.reg = LED1_MASK)

#define BTN0_PIN            GPIO_PIN(PB, 31)
#define BTN0_MODE           GPIO_IN_PU

#define MTD_0   mtd_dev_get(0)  
#define MTD_1   mtd_dev_get(1)  
#define MTD_2   mtd_dev_get(2)  
 
#define CONFIG_SDMMC_GENERIC_MTD_OFFSET     2   

#define XTIMER_WIDTH                (32)
#define XTIMER_HZ                   (1000000ul)
 
#ifdef __cplusplus
}
#endif