Struct NRF_SPIM_Type

#[repr(C)]
pub struct NRF_SPIM_Type {

    pub RESERVED: [u32; 4],
    pub TASKS_START: u32,
    pub TASKS_STOP: u32,
    pub RESERVED1: u32,
    pub TASKS_SUSPEND: u32,
    pub TASKS_RESUME: u32,
    pub RESERVED2: [u32; 56],
    pub EVENTS_STOPPED: u32,
    pub RESERVED3: [u32; 2],
    pub EVENTS_ENDRX: u32,
    pub RESERVED4: u32,
    pub EVENTS_END: u32,
    pub RESERVED5: u32,
    pub EVENTS_ENDTX: u32,
    pub RESERVED6: [u32; 10],
    pub EVENTS_STARTED: u32,
    pub RESERVED7: [u32; 44],
    pub SHORTS: u32,
    pub RESERVED8: [u32; 64],
    pub INTENSET: u32,
    pub INTENCLR: u32,
    pub RESERVED9: [u32; 61],
    pub STALLSTAT: u32,
    pub RESERVED10: [u32; 63],
    pub ENABLE: u32,
    pub RESERVED11: u32,
    pub PSEL: SPIM_PSEL_Type,
    pub RESERVED12: [u32; 3],
    pub FREQUENCY: u32,
    pub RESERVED13: [u32; 3],
    pub RXD: SPIM_RXD_Type,
    pub TXD: SPIM_TXD_Type,
    pub CONFIG: u32,
    pub RESERVED14: [u32; 2],
    pub IFTIMING: SPIM_IFTIMING_Type,
    pub CSNPOL: u32,
    pub PSELDCX: u32,
    pub DCXCNT: u32,
    pub RESERVED15: [u32; 19],
    pub ORC: u32,
}

@brief Serial Peripheral Interface Master with EasyDMA 0 (SPIM0)

Fields

RESERVED: [u32; 4]

TASKS_START: u32

< (@ 0x00000010) Start SPI transaction

TASKS_STOP: u32

< (@ 0x00000014) Stop SPI transaction

RESERVED1: u32

TASKS_SUSPEND: u32

< (@ 0x0000001C) Suspend SPI transaction

TASKS_RESUME: u32

< (@ 0x00000020) Resume SPI transaction

RESERVED2: [u32; 56]

EVENTS_STOPPED: u32

< (@ 0x00000104) SPI transaction has stopped

RESERVED3: [u32; 2]

EVENTS_ENDRX: u32

< (@ 0x00000110) End of RXD buffer reached

RESERVED4: u32

EVENTS_END: u32

< (@ 0x00000118) End of RXD buffer and TXD buffer reached

RESERVED5: u32

EVENTS_ENDTX: u32

< (@ 0x00000120) End of TXD buffer reached

RESERVED6: [u32; 10]

EVENTS_STARTED: u32

< (@ 0x0000014C) Transaction started

RESERVED7: [u32; 44]

SHORTS: u32

< (@ 0x00000200) Shortcuts between local events and tasks

RESERVED8: [u32; 64]

INTENSET: u32

< (@ 0x00000304) Enable interrupt

INTENCLR: u32

< (@ 0x00000308) Disable interrupt

RESERVED9: [u32; 61]

STALLSTAT: u32

< (@ 0x00000400) Stall status for EasyDMA RAM accesses. The fields in this register is set to STALL by hardware whenever a stall occurres and can be cleared (set to NOSTALL) by the CPU.

RESERVED10: [u32; 63]

ENABLE: u32

< (@ 0x00000500) Enable SPIM

RESERVED11: u32

PSEL: SPIM_PSEL_Type

< (@ 0x00000508) Unspecified

RESERVED12: [u32; 3]

FREQUENCY: u32

< (@ 0x00000524) SPI frequency. Accuracy depends on the HFCLK source selected.

RESERVED13: [u32; 3]

RXD: SPIM_RXD_Type

< (@ 0x00000534) RXD EasyDMA channel

TXD: SPIM_TXD_Type

< (@ 0x00000544) TXD EasyDMA channel

CONFIG: u32

< (@ 0x00000554) Configuration register

RESERVED14: [u32; 2]

IFTIMING: SPIM_IFTIMING_Type

< (@ 0x00000560) Unspecified

CSNPOL: u32

< (@ 0x00000568) Polarity of CSN output

PSELDCX: u32

< (@ 0x0000056C) Pin select for DCX signal

DCXCNT: u32

< (@ 0x00000570) DCX configuration

RESERVED15: [u32; 19]

ORC: u32

< (@ 0x000005C0) Byte transmitted after TXD.MAXCNT bytes have been transmitted in the case when RXD.MAXCNT is greater than TXD.MAXCNT

Trait Implementations

impl Clone for NRF_SPIM_Type

fn clone(&self) -> NRF_SPIM_Type

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for NRF_SPIM_Type

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for NRF_SPIM_Type

fn default() -> Self

Returns the “default value” for a type.

impl Copy for NRF_SPIM_Type

Layout

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 1476 bytes