Static ZTIMER_MSEC_BASE

pub unsafe static ZTIMER_MSEC_BASE: *mut ztimer_clock_t

@brief Base ztimer for the millisecond clock (ZTIMER_MSEC)

This ztimer will reference the counter device object at the end of the chain of ztimer_clock_t for ZTIMER_MSEC.

If ztimer_periph_rtt is not used then ZTIMER_MSEC_BASE will reference the same base as ZTIMER_USEC_BASE.

If the base counter device object’s frequency (CONFIG_ZTIMER_MSEC_BASE_FREQ) is not 1KHz then ZTIMER_MSEC will be converted on top of this one. Otherwise they will reference the same ztimer_clock.

To avoid chained conversions its better to base new ztimer_clock on top of ZTIMER_MSEC_BASE running at CONFIG_ZTIMER_MSEC_BASE_FREQ.