Constants from the datasheet of the NRF24L01+ (NG) transceiver. More...
Detailed Description
Constants from the datasheet of the NRF24L01+ (NG) transceiver.
Definition in file nrf24l01p_ng_constants.h.
#include "nrf24l01p_ng.h"
Include dependency graph for nrf24l01p_ng_constants.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
| #define | NRF24L01P_NG_MAX_PAYLOAD_WIDTH (32) |
| Maximum width of a payload, restricted by a FIFO size of 32 bytes. | |
| #define | NRF24L01P_NG_MAX_RETRANSMISSIONS (15) |
| Maximum number of retransmissions, if ESB is used as protocol. | |
| #define | NRF24L01P_NG_BASE_FRQ_MHZ (2400) |
| Base frequency. | |
| #define | NRF24L01P_NG_MAX_FRQ_MHZ (2525) |
| Maximum supported frequency. | |
| #define | NRF24L01P_NG_NUM_CHANNELS |
| Number of supported channels. | |
| #define | NRF24L01P_NG_DEFAULT_TX_ADDR { 0xE7, 0xE7, 0xE7, 0xE7, 0xE7 } |
| Reset value of TX_ADDR register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P0 { 0xE7, 0xE7, 0xE7, 0xE7, 0xE7 } |
| Reset value of RX_ADDR_P0 register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P1 { 0xC2, 0xC2, 0xC2, 0xC2, 0xC2 } |
| Reset value of RX_ADDR_P1 register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P2 (0xC3) |
| Reset value of RX_ADDR_P2 register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P3 (0xC4) |
| Reset value of RX_ADDR_P3 register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P4 (0xC5) |
| Reset value of RX_ADDR_P4 register. | |
| #define | NRF24L01P_NG_DEFAULT_ADDR_P5 (0xC6) |
| Reset value of RX_ADDR_P5 register. | |
Macro Definition Documentation
◆ NRF24L01P_NG_BASE_FRQ_MHZ
| #define NRF24L01P_NG_BASE_FRQ_MHZ (2400) |
Base frequency.
Definition at line 41 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P0
| #define NRF24L01P_NG_DEFAULT_ADDR_P0 { 0xE7, 0xE7, 0xE7, 0xE7, 0xE7 } |
Reset value of RX_ADDR_P0 register.
Definition at line 73 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P1
| #define NRF24L01P_NG_DEFAULT_ADDR_P1 { 0xC2, 0xC2, 0xC2, 0xC2, 0xC2 } |
Reset value of RX_ADDR_P1 register.
Definition at line 78 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P2
| #define NRF24L01P_NG_DEFAULT_ADDR_P2 (0xC3) |
Reset value of RX_ADDR_P2 register.
Definition at line 83 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P3
| #define NRF24L01P_NG_DEFAULT_ADDR_P3 (0xC4) |
Reset value of RX_ADDR_P3 register.
Definition at line 88 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P4
| #define NRF24L01P_NG_DEFAULT_ADDR_P4 (0xC5) |
Reset value of RX_ADDR_P4 register.
Definition at line 93 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_ADDR_P5
| #define NRF24L01P_NG_DEFAULT_ADDR_P5 (0xC6) |
Reset value of RX_ADDR_P5 register.
Definition at line 98 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_DEFAULT_TX_ADDR
| #define NRF24L01P_NG_DEFAULT_TX_ADDR { 0xE7, 0xE7, 0xE7, 0xE7, 0xE7 } |
Reset value of TX_ADDR register.
Definition at line 68 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_MAX_FRQ_MHZ
| #define NRF24L01P_NG_MAX_FRQ_MHZ (2525) |
Maximum supported frequency.
Definition at line 46 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_MAX_PAYLOAD_WIDTH
| #define NRF24L01P_NG_MAX_PAYLOAD_WIDTH (32) |
Maximum width of a payload, restricted by a FIFO size of 32 bytes.
Definition at line 30 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_MAX_RETRANSMISSIONS
| #define NRF24L01P_NG_MAX_RETRANSMISSIONS (15) |
Maximum number of retransmissions, if ESB is used as protocol.
Definition at line 36 of file nrf24l01p_ng_constants.h.
◆ NRF24L01P_NG_NUM_CHANNELS
| #define NRF24L01P_NG_NUM_CHANNELS |
Number of supported channels.
frequency range: 2400 - 2525 Mhz occupied bandwidth for each channel: 250 kbps: < 1Mhz 1000 kbps: < 1Mhz 2000 kbps: < 2Mhz
-> spaces between each channel´s base frequency must be at least 2 Mhz, to be sufficient for all data rates.
Definition at line 62 of file nrf24l01p_ng_constants.h.
