Loading...
Searching...
No Matches
Kinetis MCG

Implementation of the Kinetis Multipurpose Clock Generator (MCG) driver. More...

Detailed Description

Implementation of the Kinetis Multipurpose Clock Generator (MCG) driver.

Please add mcg.h in cpu_conf.h and MCG configuration to periph_conf.h

The configuration consists of the clock_config struct (clock_config_t) and two macros CLOCK_CORECLOCK, CLOCK_BUSCLOCK. The two macros are used by other periph driver configurations to tell the driver what value the module clock is running at.

State transition map

The driver will automatically move step by step through the map if the requested mode is not a direct neighbor of the current mode.

MCG Configuration Examples (for periph_conf.h)

Example for PEE Mode with an 8 MHz crystal connected to XTAL0/EXTAL0

The resulting PLL output frequency will be 60 MHz, the core will be running at the full PLL output frequency.

static const clock_config_t clock_config = {
    // safe clock dividers for this CPU
    .clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(0) |
               SIM_CLKDIV1_OUTDIV3(1) | SIM_CLKDIV1_OUTDIV4(2),
    // Select default clocking mode
    .default_mode = KINETIS_MCG_MODE_PEE,
    // The crystal connected to OSC0 is 8 MHz
    .erc_range = KINETIS_MCG_ERC_RANGE_HIGH,
    .fcrdiv = 0, // Fast IRC divide by 1 => 4 MHz
    .oscsel = 0, // Use OSC0 for external clock
    .clc = 0, // Use external load caps on board
    .fll_frdiv = 0b011, // Divide by 256
    .fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1920, // FLL freq = 60 MHz ?
    .fll_factor_fee = KINETIS_MCG_FLL_FACTOR_1920, // FLL freq = 60 MHz
    .pll_prdiv = 0b00011, // Divide by 4 => PLL input freq = 2 MHz
    .pll_vdiv = 0b00110, // Multiply by 30 => PLL output freq = 60 MHz
    .enable_oscillator = true, // Enable oscillator, EXTAL0 is connected to a crystal
    .select_fast_irc = true, // Use fast IRC when in FBI mode
    .enable_mcgirclk = false, // We don't need the internal reference clock while running in PEE mode
};
#define CLOCK_CORECLOCK              (60000000ul)
#define CLOCK_BUSCLOCK               (CLOCK_CORECLOCK / 1)

Example for FEE Mode, 32.768 kHz crystal connected to RTC

The resulting FLL output frequency will be circa 72 MHz, the core will be running at the full FLL output frequency.

static const clock_config_t clock_config = {
    // safe clock dividers for this CPU
    .clkdiv1 = SIM_CLKDIV1_OUTDIV1(0) | SIM_CLKDIV1_OUTDIV2(1) |
               SIM_CLKDIV1_OUTDIV2(1) | SIM_CLKDIV1_OUTDIV3(2),
    .default_mode = KINETIS_MCG_MODE_FEE,
    // The board has a 16 MHz crystal, though it is not used in this configuration
    .erc_range = KINETIS_MCG_ERC_RANGE_VERY_HIGH,
    .fcrdiv = 0, // Fast IRC divide by 1 => 4 MHz
    .oscsel = 1, // Use RTC for external clock
    .clc = 0b0001, // 16 pF capacitors yield ca 10 pF load capacitance
    .fll_frdiv = 0b000, // Divide by 1 => FLL input 32768 Hz
    .fll_factor_fei = KINETIS_MCG_FLL_FACTOR_1920, // FLL freq = 60 MHz ?
    .fll_factor_fee = KINETIS_MCG_FLL_FACTOR_2197, // FLL freq = 71.991296 MHz
    .pll_prdiv = 0b00111, // Divide by 8
    .pll_vdiv = 0b01100, // Multiply by 36 => PLL freq = 72 MHz
    .enable_oscillator = false, // OSC0 disabled
    .select_fast_irc = true, // Use fast IRC for internal reference clock
    .enable_mcgirclk = false, // We don't need the internal reference clock while running in FEE mode
};
#define CLOCK_CORECLOCK              (71991296ul)
#define CLOCK_BUSCLOCK               (CLOCK_CORECLOCK / 2)

Files

file  mcg.h
 Interface definition for the Kinetis MCG driver.
 

Macros

#define CLOCK_CORECLOCK   (MCGOUTCLK)
 Core clock frequency, used by the ARM core and certain hardware modules in Kinetis CPUs.
 
#define CLOCK_BUSCLOCK   (CLOCK_CORECLOCK / x)
 Bus clock frequency, used by several hardware modules in Kinetis CPUs.
 

Functions

int kinetis_mcg_set_mode (kinetis_mcg_mode_t mode)
 Switch the MCG to the specified clocking mode.
 
void kinetis_mcg_init (void)
 Initialize the MCG.
 

Macro Definition Documentation

◆ CLOCK_BUSCLOCK

#define CLOCK_BUSCLOCK   (CLOCK_CORECLOCK / x)

Bus clock frequency, used by several hardware modules in Kinetis CPUs.

The clock is derived from the MCG output clock divided by an integer divisor, which is controlled by the clock_config_t::clkdiv1 settings

Definition at line 147 of file mcg.h.

◆ CLOCK_CORECLOCK

#define CLOCK_CORECLOCK   (MCGOUTCLK)

Core clock frequency, used by the ARM core and certain hardware modules in Kinetis CPUs.

The clock is derived from the MCG output clock divided by an integer divisor, which is controlled by the clock_config_t::clkdiv1 settings

Definition at line 140 of file mcg.h.

Function Documentation

◆ kinetis_mcg_init()

void kinetis_mcg_init ( void  )

Initialize the MCG.

The configuration is found in the clock_config struct defined in periph_conf.h

◆ kinetis_mcg_set_mode()

int kinetis_mcg_set_mode ( kinetis_mcg_mode_t  mode)

Switch the MCG to the specified clocking mode.

Depending on the current clocking mode, this function may step through several other clocking modes in order to be able to reach the target mode.

Parameters
[in]modeTarget mode
Returns
0 on success
<0 on error