Detailed Description

Macros
#define	__CM3_REV 0x0200
	Configuration of the Cortex-M3 Processor and Core Peripherals.

#define	__MPU_PRESENT 1
	CC2538 does provide a MPU.

#define	__NVIC_PRIO_BITS 3
	CC2538 uses 3 Bits for the Priority Levels.

#define	__Vendor_SysTickConfig 0
	Set to 1 if different SysTick Config is used.

enum	IRQn { ResetHandler_IRQn = -15 , NonMaskableInt_IRQn = -14 , HardFault_IRQn = -13 , MemoryManagement_IRQn = -12 , BusFault_IRQn = -11 , UsageFault_IRQn = -10 , SVCall_IRQn = - 5 , DebugMonitor_IRQn = - 4 , PendSV_IRQn = - 2 , SysTick_IRQn = - 1 , GPIO_PORT_A_IRQn = 0 , GPIO_PORT_B_IRQn = 1 , GPIO_PORT_C_IRQn = 2 , GPIO_PORT_D_IRQn = 3 , UART0_IRQn = 5 , UART1_IRQn = 6 , SSI0_IRQn = 7 , I2C_IRQn = 8 , ADC_IRQn = 14 , WDT_IRQn = 18 , GPTIMER_0A_IRQn = 19 , GPTIMER_0B_IRQn = 20 , GPTIMER_1A_IRQn = 21 , GPTIMER_1B_IRQn = 22 , GPTIMER_2A_IRQn = 23 , GPTIMER_2B_IRQn = 24 , ADC_CMP_IRQn = 25 , RF_RXTX_ALT_IRQn = 26 , RF_ERR_ALT_IRQn = 27 , SYS_CTRL_IRQn = 28 , FLASH_CTRL_IRQn = 29 , AES_ALT_IRQn = 30 , PKA_ALT_IRQn = 31 , SM_TIMER_ALT_IRQn = 32 , MAC_TIMER_ALT_IRQn = 33 , SSI1_IRQn = 34 , GPTIMER_3A_IRQn = 35 , GPTIMER_3B_IRQn = 36 , UDMA_IRQn = 46 , UDMA_ERR_IRQn = 47 , USB_IRQn = 140 , RF_RXTX_IRQn = 141 , RF_ERR_IRQn = 142 , AES_IRQn = 143 , PKA_IRQn = 144 , SM_TIMER_IRQn = 145 , MACTIMER_IRQn = 146 , PERIPH_COUNT_IRQn = (MACTIMER_IRQn + 1) }
	Interrupt Number Definition. More...

typedef enum IRQn	IRQn_Type
	Interrupt Number Definition.

Cortex-M3 core interrupt handlers
void	Reset_Handler (void)
	Reset handler.

void	NMI_Handler (void)
	NMI handler.

void	HardFault_Handler (void)
	Hard fault handler.

void	MemManage_Handler (void)
	Memory management handler.

void	BusFault_Handler (void)
	Bus fault handler.

void	UsageFault_Handler (void)
	Usage fault handler.

void	SVC_Handler (void)
	SVC handler.

void	DebugMon_Handler (void)
	Debug monitor handler.

void	PendSV_Handler (void)
	PendSV handler.

void	SysTick_Handler (void)
	SysTick handler.

Macro Definition Documentation

#define __CM3_REV 0x0200

Configuration of the Cortex-M3 Processor and Core Peripherals.

CC2538 core revision number ([15:8] revision number, [7:0] patch number)

Definition at line 110 of file cc2538.h.

#define __MPU_PRESENT 1

CC2538 does provide a MPU.

Definition at line 111 of file cc2538.h.

#define __NVIC_PRIO_BITS 3

CC2538 uses 3 Bits for the Priority Levels.

Definition at line 112 of file cc2538.h.

#define __Vendor_SysTickConfig 0

Set to 1 if different SysTick Config is used.

Definition at line 113 of file cc2538.h.

enum IRQn

Interrupt Number Definition.

Enumerator
ResetHandler_IRQn	1 Reset Handler
NonMaskableInt_IRQn	2 Non Maskable Interrupt
HardFault_IRQn	3 Cortex-M3 Hard Fault Interrupt
MemoryManagement_IRQn	4 Cortex-M3 Memory Management Interrupt
BusFault_IRQn	5 Cortex-M3 Bus Fault Interrupt
UsageFault_IRQn	6 Cortex-M3 Usage Fault Interrupt
SVCall_IRQn	11 Cortex-M3 SV Call Interrupt
DebugMonitor_IRQn	12 Cortex-M3 Debug Monitor Interrupt
PendSV_IRQn	14 Cortex-M3 Pend SV Interrupt
SysTick_IRQn	15 Cortex-M3 System Tick Interrupt
GPIO_PORT_A_IRQn	GPIO port A
GPIO_PORT_B_IRQn	GPIO port B
GPIO_PORT_C_IRQn	GPIO port C
GPIO_PORT_D_IRQn	GPIO port D
UART0_IRQn	UART0
UART1_IRQn	UART1
SSI0_IRQn	SSI0
I2C_IRQn	I2C
ADC_IRQn	ADC
WDT_IRQn	Watchdog Timer
GPTIMER_0A_IRQn	GPTimer 0A
GPTIMER_0B_IRQn	GPTimer 0B
GPTIMER_1A_IRQn	GPTimer 1A
GPTIMER_1B_IRQn	GPTimer 1B
GPTIMER_2A_IRQn	GPTimer 2A
GPTIMER_2B_IRQn	GPTimer 2B
ADC_CMP_IRQn	Analog Comparator
RF_RXTX_ALT_IRQn	RF TX/RX (Alternate)
RF_ERR_ALT_IRQn	RF Error (Alternate)
SYS_CTRL_IRQn	System Control
FLASH_CTRL_IRQn	Flash memory control
AES_ALT_IRQn	AES (Alternate)
PKA_ALT_IRQn	PKA (Alternate)
SM_TIMER_ALT_IRQn	SM Timer (Alternate)
MAC_TIMER_ALT_IRQn	MAC Timer (Alternate)
SSI1_IRQn	SSI1
GPTIMER_3A_IRQn	GPTimer 3A
GPTIMER_3B_IRQn	GPTimer 3B
UDMA_IRQn	uDMA software
UDMA_ERR_IRQn	uDMA error
USB_IRQn	USB
RF_RXTX_IRQn	RF Core Rx/Tx
RF_ERR_IRQn	RF Core Error
AES_IRQn	AES
PKA_IRQn	PKA
SM_TIMER_IRQn	SM Timer
MACTIMER_IRQn	MAC Timer
PERIPH_COUNT_IRQn	Number of peripheral IDs.

Definition at line 34 of file cc2538.h.