Toggle navigation
Documentation
The friendly Operating System for the Internet of Things
Loading...
Searching...
No Matches
board.h
Go to the documentation of this file.
1
/*
2
* Copyright (C) 2017 Baptiste Clenet <bapclenet@gmail.com>
3
*
4
* This file is subject to the terms and conditions of the GNU Lesser
5
* General Public License v2.1. See the file LICENSE in the top level
6
* directory for more details.
7
*/
8
21
#ifndef BOARD_H
22
#define BOARD_H
23
24
#include "cpu.h"
25
26
#ifdef __cplusplus
27
extern
"C"
{
28
#endif
29
34
#define AT86RF2XX_PARAM_SPI SPI_DEV(0)
35
#define AT86RF2XX_PARAM_CS GPIO_PIN(PB, 31)
36
#define AT86RF2XX_PARAM_INT GPIO_PIN(PB, 0)
37
#define AT86RF2XX_PARAM_SLEEP GPIO_PIN(PA, 20)
38
#define AT86RF2XX_PARAM_RESET GPIO_PIN(PB, 15)
39
#define AT86RF2XX_PARAM_SPI_CLK SPI_CLK_5MHZ
46
#define LED_PORT PORT->Group[0]
47
48
#define LED0_PIN GPIO_PIN(PA, 18)
49
#define LED0_MASK (1 << 18)
50
#define LED0_ON (LED_PORT.OUTCLR.reg = LED0_MASK)
51
#define LED0_OFF (LED_PORT.OUTSET.reg = LED0_MASK)
52
#define LED0_TOGGLE (LED_PORT.OUTTGL.reg = LED0_MASK)
53
54
#define LED1_PIN GPIO_PIN(PA, 19)
55
#define LED1_MASK (1 << 19)
56
#define LED1_ON (LED_PORT.OUTCLR.reg = LED1_MASK)
57
#define LED1_OFF (LED_PORT.OUTSET.reg = LED1_MASK)
58
#define LED1_TOGGLE (LED_PORT.OUTTGL.reg = LED1_MASK)
65
#define BTN0_PIN GPIO_PIN(PA, 28)
66
#define BTN0_MODE GPIO_IN_PU
73
#define RFCTL1_PIN GPIO_PIN(PA, 9)
74
#define RFCTL2_PIN GPIO_PIN(PA, 12)
80
enum
{
81
RFCTL_ANTENNA_BOARD,
82
RFCTL_ANTENNA_EXT,
83
};
84
89
#ifndef RFCTL_ANTENNA_DEFAULT
90
#define RFCTL_ANTENNA_DEFAULT RFCTL_ANTENNA_BOARD
91
#endif
97
void
board_antenna_config
(uint8_t antenna);
98
99
#ifdef __cplusplus
100
}
101
#endif
102
103
#endif
/* BOARD_H */
board_antenna_config
void board_antenna_config(uint8_t antenna)
Set antenna switch.
Generated on Fri Apr 19 2024 10:16:35 by
1.9.8