Board specific definitions for the omote board. More...

Detailed Description

Board specific definitions for the omote board.

Definition in file board.h.

#include "cpu.h"
#include "periph/gpio.h"
#include "periph/spi.h"
#include "cc2538_eui_primary.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

LED pin definitions
#define	LED0_PIN GPIO_PIN(3, 0)

#define	LED1_PIN GPIO_PIN(3, 4)

#define	LED0_MASK (1 << 0)

#define	LED1_MASK (1 << 4)

#define	LED0_ON (GPIO_D->DATA \|= LED0_MASK)

#define	LED0_OFF (GPIO_D->DATA &= ~LED0_MASK)

#define	LED0_TOGGLE (GPIO_D->DATA ^= LED0_MASK)

#define	LED1_ON (GPIO_B->DATA \|= LED1_MASK)

#define	LED1_OFF (GPIO_B->DATA &= ~LED1_MASK)

#define	LED1_TOGGLE (GPIO_B->DATA ^= LED1_MASK)

#define	LED_ALL_OFF

#define	LED_ALL_ON

User button pin definition
#define	BTN0_PIN GPIO_PIN(1, 0)

#define	BTN0_MODE GPIO_IN_PU

Flash Customer Configuration Area (CCA) parameters
#define	UPDATE_CCA (1)

#define	CCA_BACKDOOR_ENABLE (1)

#define	CCA_BACKDOOR_PORT_A_PIN (3)
	Select button.

#define	CCA_BACKDOOR_ACTIVE_LEVEL (0)
	Active low.

#define	BOOT_PIN GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN)
	BSL_BOOT Pin.

xtimer configuration
#define	XTIMER_WIDTH (16)

#define	XTIMER_BACKOFF (50)

#define	XTIMER_ISR_BACKOFF (40)

USB configuration
#define	INTERNAL_PERIPHERAL_VID (0x0451)

#define	INTERNAL_PERIPHERAL_PID (0x16C8)

Macro Definition Documentation

◆ BOOT_PIN

#define BOOT_PIN GPIO_PIN(0, CCA_BACKDOOR_PORT_A_PIN)

BSL_BOOT Pin.

Definition at line 72 of file board.h.

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN_PU

Definition at line 58 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO_PIN(1, 0)

Definition at line 57 of file board.h.

◆ CCA_BACKDOOR_ACTIVE_LEVEL

#define CCA_BACKDOOR_ACTIVE_LEVEL (0)

Active low.

Definition at line 70 of file board.h.

◆ CCA_BACKDOOR_ENABLE

#define CCA_BACKDOOR_ENABLE (1)

Definition at line 68 of file board.h.

◆ CCA_BACKDOOR_PORT_A_PIN

#define CCA_BACKDOOR_PORT_A_PIN (3)

Select button.

Definition at line 69 of file board.h.

◆ INTERNAL_PERIPHERAL_PID

#define INTERNAL_PERIPHERAL_PID (0x16C8)

Definition at line 89 of file board.h.

◆ INTERNAL_PERIPHERAL_VID

#define INTERNAL_PERIPHERAL_VID (0x0451)

Definition at line 88 of file board.h.

◆ LED0_MASK

#define LED0_MASK (1 << 0)

Definition at line 36 of file board.h.

◆ LED0_OFF

#define LED0_OFF (GPIO_D->DATA &= ~LED0_MASK)

Definition at line 40 of file board.h.

◆ LED0_ON

#define LED0_ON (GPIO_D->DATA |= LED0_MASK)

Definition at line 39 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(3, 0)

Definition at line 33 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE (GPIO_D->DATA ^= LED0_MASK)

Definition at line 41 of file board.h.

◆ LED1_MASK

#define LED1_MASK (1 << 4)

Definition at line 37 of file board.h.

◆ LED1_OFF

#define LED1_OFF (GPIO_B->DATA &= ~LED1_MASK)

Definition at line 44 of file board.h.

◆ LED1_ON

#define LED1_ON (GPIO_B->DATA |= LED1_MASK)

Definition at line 43 of file board.h.

◆ LED1_PIN

#define LED1_PIN GPIO_PIN(3, 4)

Definition at line 34 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE (GPIO_B->DATA ^= LED1_MASK)

Definition at line 45 of file board.h.

◆ LED_ALL_OFF

#define LED_ALL_OFF

Value:

LED0_OFF; \

LED1_OFF;

LED1_OFF

#define LED1_OFF

Switch off TX LED yellow.

Definition board.h:49

Definition at line 47 of file board.h.

◆ LED_ALL_ON

#define LED_ALL_ON

Value:

LED0_ON; \

LED1_ON;

LED1_ON

#define LED1_ON

Switch on TX LED yellow.

Definition board.h:48

Definition at line 49 of file board.h.

◆ UPDATE_CCA

#define UPDATE_CCA (1)

Definition at line 66 of file board.h.

◆ XTIMER_BACKOFF

#define XTIMER_BACKOFF (50)

Definition at line 80 of file board.h.

◆ XTIMER_ISR_BACKOFF

#define XTIMER_ISR_BACKOFF (40)

Definition at line 81 of file board.h.

◆ XTIMER_WIDTH

#define XTIMER_WIDTH (16)

Definition at line 79 of file board.h.